Back to the main page Back to category Amplifiers
musical instrument details
2) KRK VXT-4 4" Active Monitors +Presonus FADERPORT +Presonus HP4 Headphone AMP
Estimated price for orientation: 549 $
Category: Amplifiers
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: KRK UPC: 613816153923 MPN: VXT-4
Package Includes: (2) KRK VXT-4 4" VXT Series Monitors (Powered) (1) Presonus FADERPORT USB Fader Daw Mixing Controller (1) Presonus HP4 4 Channel Headphone Amplifier Monitoring System
Description Of VXT-4: Authorized KRK Dealer!
KRK VXT-4 Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a widersweet spot the VXT monitors achieve a new level of precision.The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression, enabling these monitors to maintain their sonic signature.With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.
Description:
At KRK, our focus has always been to make the most accurate studio monitors available at any price. So when you use a VXT powered monitor, you can be confident that you get the most accurate reproduction of your mix. VXT’s diffraction-limiting curved surfaces, silk-domed tweeter, seamless crossover, and KRK’s trademark yellow Kevlar woofer bring superior audio imaging, outstanding transient response, and amazing detail. For over 20 years, KRK has mastered the art of recording monitors, and the VXT is the culmination of this art. Listen for yourself, and believe!Radical curves for better imaging. The molded shape of the VXT allows for radically curved surfaces that sound better. Traditional rectangular speakers suffer from diffraction as sounds leaving the edge of the cabinet are reflected back into the sound field causing phase distortion. The VXT virtually eliminates diffraction and delivers excellent imaging characteristics and a much wider sweet spot. There are no discontinuous elements to create diffraction.Ports Where They Belong. Take a look at competitive monitors and you'll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners amplifying low frequency information which will color your mix. The superior design of the KRK VXT include front-firing ports, which are just the right shape to reduce port turbulence. You'll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.The VXT uses high-tech ABS Structural Foam in its cabinet. This material is very rugged and extremely impact resistant, and makes it possible for KRK engineers to create a speaker with no internal parallel walls, thereby preventing sound-coloring internal nodes. This material also has far better damping characteristics than traditional speaker materials which eliminates coloration caused by cabinet resonance.Revolutionary materials, Revolutionary Sound The new, stiffer, lighter woofer cone has an extruded aluminum pole piece and vented formers. This improves transient response, reduces distortion and extends low-frequency response due to this lighter, stiffer cone. The aluminum pole piece and venter formers eliminate overheating which improves performance.Catch A Wave, For A 3D Mix Our recessed silk-domed tweeters provide amazing high-end detail. Our careful design of dome and waveguide geometry coupled to the curved front baffle are optimized for on and off-axis linearity resulting in excellent imaging and a wider sweet spot. Features: 1" Silk Dome Neodymium Tweeter 4" Woven Kevlar Woofer Bi-amplified Design with Active Crossover Curved Front Panel for Enhanced Imaging Limiter with Defeat (and front panel indicator) Ground Lift Switch Auto Mute Peak SPL: 114dB Frequency Response: 37Hz to 20kHz Protective Switch CoversSpecifications: Drivers: Input: XLR-1/4" TRS Combo 10k Ohm Blanced Pin 1 + Sleeve = Ground Pin 2 + Tip = (+) High Pin 3 + Ring = (-) Low Controls: System Level Adjust: +6dB to -30dB Variable Ground Lift: LFT (On) or GND (Off) Clip Indicator: On, Off or Limit Auto Mute: On or Off HF Adjust - N/A LF Adjust - N/A Amp & Fusing: HF: 15 Watts LF: 30 Watts 2.0A 100VAC 50HZ 2.0A 110-120VAC 50/60Hz 1.0A 220-240VAC 50/60Hz Frequency Response: 59Hz - 22kHz +/- 2dB Max SPL: Omni Mount Part: 20.5 WBX Screw Type: M6 Screw Length: 12.5mm Min. - 17.5mm Max. Dimensions:(H x W x D): 10" x 7.37" x 7" 254mm x 187mm x 177mm Weight: 14 lbs (6.4 kg)
Description Of FADERPORT: #1 Authorized Presonus Internet Dealer! Features Summary: complete recording transport control high-quality Alps fader used in control surfaces costing over $10K+ touch sensitive, 100mm long throw motorized fader dual-servo drive belt motor design for fast and smooth operation write single channel or group channel volume automation write pan and mute automation 1024 steps of resolution pan control, mute, solo, record enable quick window selection (edit, mix, transport) rugged metal top plate rugged military-grade push buttons footswitch jack for hands free punch in/out compatible with all major recording software including Pro Tools, Cubase, Nuendo, Logic, and more Mac and Windows compatible
Description: The FaderPort puts the feel, vibe, and efficiency back into music recording and production. No more clicking through menus and drawing automation edits with a mouse. The easy-to-use FaderPort delivers complete transport control for fast and efficient recording along with ultra high quality, touch sensitivemotorized fader for writing fades and automation.The touch-sensitive, long throw motorizedfader on the FaderPort has the feel needed for recording perfect fades and writing volume, mute and pan automation in real-time. Solo and record enable can also be easily controlled with the FaderPort along with window selection, play, stop, record, and managing markers (locate points) for fast and easy recording. A foot switch jack is also included on the FaderPort for hands free punch-in/out recording. The FaderPort works with all Mac or Windows-based recording software including Pro Tools, Cubase, Nuendo, Logic and more.Not all Faders are created equal
FaderPort utilizes the same ultra high-quality Alps fader that is used in professional control surfaces and digital mixing consoles costing 200 times the price including DigiDesign's D-Command. The fader in the FaderPort utilizes a dual servo motorized drive belt system for fast-acting, accurate, and smooth operation. The FaderPort's 100mm long throw fader delivers 1024-step resolution for wrting ultra-fine and accurate fades and adjustments.
Important Documents:
(All links will open in a new pop-up window)
Technical Specifications: Computer system requirements: Windows XP or Mac OS X operating system one available USB portControl Emulation: Pro Tools, Logic, and Cubase/Nuendo (Mac) uses HUI Control. Cubase/Nuendo (Windows), Sonar and Digital Performer uses custom "native-mode" FaderPort control driver.Controls: PAN, MUTE, SOLO, REC, channel selection with BANK, OUTPUT (master fader), READ, WRITE, TOUCH, OFF (fader mode), Window View (MIX, PROJ {edit}, TRNS (transport), UNDO, START, END, PUNCH IN, USER, LOOP, REWIND, FAST FORWARD, STOP, PLAY RECORD. (functionality varies slightly between DAW software applications) Fader: Alps touch-sensative motorized model used in professional control surfaces including DigiDesign's D-Command Dual servo motorized drive beilt system for fast and quiet operation Ultra smooth feel and lightning fast Heavy-duty long life construction Extreme touch-sensitivity 100mm long throw for writing perfect fades Resolution 10-bit, 1024 stepsPower: operational via USB bus, motorized fader powered via 9V 1.2A DC external power supply (factory configured). Included Items: FaderPort, USB cable, power supply, rubber feet Size: Approx. 7" x 5.25" x 1.75" (18cm x 13cm x 4cm) Weight: Approx. 1 lb. Software Compatibility:
The FaderPort has been tested and approved to work with the following software: Native Mode: Cubase SX3 and later Digital Performer 4 and later Logic Express/Pro 7 and later Nuendo 3 and later Samplitude 10 Sequoia 10 Sonar 6 and later HUI Emulation: Cubase LE, SE, and SL 3 and earlier (with limitations) Nuendo 2 and earlier (with limitations) Pro Tools 6 and later Pro Tools M-Powered 6 and later
#1 Authorized Presonus Internet Dealer! Features Summary: Four High Power Headphone Outputs Ultra loud (150mW per channel) Ultra quiet operation Musical Wide Dynamic Range Control Room Monitor Outputs with Level Control Mono or Stereo Operation Monitor Mute Switch Daisy Chain an Infinite Number of Units Compact package
Description Of HP4: "To my amazement, your HP4 sounded as good as both of my hi-fi stereo heaphone amps. Very very clean and loud. I can't believe you put 150 mw per channel, @52 ohms, to four headphone outputs and offer such a quality unit for very little over $100."
- M. Burke, via email The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price.
Important Documents:
(All links will open in a new pop-up window)
Technical Specifications:
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | KRK |
| UPC: | 613816153923 | MPN: | VXT-4 |
Package Includes: (2) KRK VXT-4 4" VXT Series Monitors (Powered) (1) Presonus FADERPORT USB Fader Daw Mixing Controller (1) Presonus HP4 4 Channel Headphone Amplifier Monitoring System
Description Of VXT-4: Authorized KRK Dealer!
KRK VXT-4 Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a widersweet spot the VXT monitors achieve a new level of precision.The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression, enabling these monitors to maintain their sonic signature.With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.
Description:
At KRK, our focus has always been to make the most accurate studio monitors available at any price. So when you use a VXT powered monitor, you can be confident that you get the most accurate reproduction of your mix. VXT’s diffraction-limiting curved surfaces, silk-domed tweeter, seamless crossover, and KRK’s trademark yellow Kevlar woofer bring superior audio imaging, outstanding transient response, and amazing detail. For over 20 years, KRK has mastered the art of recording monitors, and the VXT is the culmination of this art. Listen for yourself, and believe!Radical curves for better imaging. The molded shape of the VXT allows for radically curved surfaces that sound better. Traditional rectangular speakers suffer from diffraction as sounds leaving the edge of the cabinet are reflected back into the sound field causing phase distortion. The VXT virtually eliminates diffraction and delivers excellent imaging characteristics and a much wider sweet spot. There are no discontinuous elements to create diffraction.Ports Where They Belong. Take a look at competitive monitors and you'll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners amplifying low frequency information which will color your mix. The superior design of the KRK VXT include front-firing ports, which are just the right shape to reduce port turbulence. You'll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.The VXT uses high-tech ABS Structural Foam in its cabinet. This material is very rugged and extremely impact resistant, and makes it possible for KRK engineers to create a speaker with no internal parallel walls, thereby preventing sound-coloring internal nodes. This material also has far better damping characteristics than traditional speaker materials which eliminates coloration caused by cabinet resonance.Revolutionary materials, Revolutionary Sound The new, stiffer, lighter woofer cone has an extruded aluminum pole piece and vented formers. This improves transient response, reduces distortion and extends low-frequency response due to this lighter, stiffer cone. The aluminum pole piece and venter formers eliminate overheating which improves performance.Catch A Wave, For A 3D Mix Our recessed silk-domed tweeters provide amazing high-end detail. Our careful design of dome and waveguide geometry coupled to the curved front baffle are optimized for on and off-axis linearity resulting in excellent imaging and a wider sweet spot. Features: 1" Silk Dome Neodymium Tweeter 4" Woven Kevlar Woofer Bi-amplified Design with Active Crossover Curved Front Panel for Enhanced Imaging Limiter with Defeat (and front panel indicator) Ground Lift Switch Auto Mute Peak SPL: 114dB Frequency Response: 37Hz to 20kHz Protective Switch CoversSpecifications: Drivers: Input: XLR-1/4" TRS Combo 10k Ohm Blanced Pin 1 + Sleeve = Ground Pin 2 + Tip = (+) High Pin 3 + Ring = (-) Low Controls: System Level Adjust: +6dB to -30dB Variable Ground Lift: LFT (On) or GND (Off) Clip Indicator: On, Off or Limit Auto Mute: On or Off HF Adjust - N/A LF Adjust - N/A Amp & Fusing: HF: 15 Watts LF: 30 Watts 2.0A 100VAC 50HZ 2.0A 110-120VAC 50/60Hz 1.0A 220-240VAC 50/60Hz Frequency Response: 59Hz - 22kHz +/- 2dB Max SPL: Omni Mount Part: 20.5 WBX Screw Type: M6 Screw Length: 12.5mm Min. - 17.5mm Max. Dimensions:(H x W x D): 10" x 7.37" x 7" 254mm x 187mm x 177mm Weight: 14 lbs (6.4 kg)
Description Of FADERPORT: #1 Authorized Presonus Internet Dealer! Features Summary: complete recording transport control high-quality Alps fader used in control surfaces costing over $10K+ touch sensitive, 100mm long throw motorized fader dual-servo drive belt motor design for fast and smooth operation write single channel or group channel volume automation write pan and mute automation 1024 steps of resolution pan control, mute, solo, record enable quick window selection (edit, mix, transport) rugged metal top plate rugged military-grade push buttons footswitch jack for hands free punch in/out compatible with all major recording software including Pro Tools, Cubase, Nuendo, Logic, and more Mac and Windows compatible
Description: The FaderPort puts the feel, vibe, and efficiency back into music recording and production. No more clicking through menus and drawing automation edits with a mouse. The easy-to-use FaderPort delivers complete transport control for fast and efficient recording along with ultra high quality, touch sensitivemotorized fader for writing fades and automation.The touch-sensitive, long throw motorizedfader on the FaderPort has the feel needed for recording perfect fades and writing volume, mute and pan automation in real-time. Solo and record enable can also be easily controlled with the FaderPort along with window selection, play, stop, record, and managing markers (locate points) for fast and easy recording. A foot switch jack is also included on the FaderPort for hands free punch-in/out recording. The FaderPort works with all Mac or Windows-based recording software including Pro Tools, Cubase, Nuendo, Logic and more.Not all Faders are created equal
FaderPort utilizes the same ultra high-quality Alps fader that is used in professional control surfaces and digital mixing consoles costing 200 times the price including DigiDesign's D-Command. The fader in the FaderPort utilizes a dual servo motorized drive belt system for fast-acting, accurate, and smooth operation. The FaderPort's 100mm long throw fader delivers 1024-step resolution for wrting ultra-fine and accurate fades and adjustments.
Important Documents:
(All links will open in a new pop-up window)
Technical Specifications: Computer system requirements: Windows XP or Mac OS X operating system one available USB portControl Emulation: Pro Tools, Logic, and Cubase/Nuendo (Mac) uses HUI Control. Cubase/Nuendo (Windows), Sonar and Digital Performer uses custom "native-mode" FaderPort control driver.Controls: PAN, MUTE, SOLO, REC, channel selection with BANK, OUTPUT (master fader), READ, WRITE, TOUCH, OFF (fader mode), Window View (MIX, PROJ {edit}, TRNS (transport), UNDO, START, END, PUNCH IN, USER, LOOP, REWIND, FAST FORWARD, STOP, PLAY RECORD. (functionality varies slightly between DAW software applications) Fader: Alps touch-sensative motorized model used in professional control surfaces including DigiDesign's D-Command Dual servo motorized drive beilt system for fast and quiet operation Ultra smooth feel and lightning fast Heavy-duty long life construction Extreme touch-sensitivity 100mm long throw for writing perfect fades Resolution 10-bit, 1024 stepsPower: operational via USB bus, motorized fader powered via 9V 1.2A DC external power supply (factory configured). Included Items: FaderPort, USB cable, power supply, rubber feet Size: Approx. 7" x 5.25" x 1.75" (18cm x 13cm x 4cm) Weight: Approx. 1 lb. Software Compatibility:
The FaderPort has been tested and approved to work with the following software: Native Mode: Cubase SX3 and later Digital Performer 4 and later Logic Express/Pro 7 and later Nuendo 3 and later Samplitude 10 Sequoia 10 Sonar 6 and later HUI Emulation: Cubase LE, SE, and SL 3 and earlier (with limitations) Nuendo 2 and earlier (with limitations) Pro Tools 6 and later Pro Tools M-Powered 6 and later
#1 Authorized Presonus Internet Dealer! Features Summary: Four High Power Headphone Outputs Ultra loud (150mW per channel) Ultra quiet operation Musical Wide Dynamic Range Control Room Monitor Outputs with Level Control Mono or Stereo Operation Monitor Mute Switch Daisy Chain an Infinite Number of Units Compact package
Description Of HP4: "To my amazement, your HP4 sounded as good as both of my hi-fi stereo heaphone amps. Very very clean and loud. I can't believe you put 150 mw per channel, @52 ohms, to four headphone outputs and offer such a quality unit for very little over $100."
- M. Burke, via email The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price.
Important Documents:
(All links will open in a new pop-up window)
Technical Specifications:
Description Of VXT-4: Authorized KRK Dealer!
Description:
At KRK, our focus has always been to make the most accurate studio monitors available at any price. So when you use a VXT powered monitor, you can be confident that you get the most accurate reproduction of your mix. VXT’s diffraction-limiting curved surfaces, silk-domed tweeter, seamless crossover, and KRK’s trademark yellow Kevlar woofer bring superior audio imaging, outstanding transient response, and amazing detail. For over 20 years, KRK has mastered the art of recording monitors, and the VXT is the culmination of this art. Listen for yourself, and believe!Radical curves for better imaging. The molded shape of the VXT allows for radically curved surfaces that sound better. Traditional rectangular speakers suffer from diffraction as sounds leaving the edge of the cabinet are reflected back into the sound field causing phase distortion. The VXT virtually eliminates diffraction and delivers excellent imaging characteristics and a much wider sweet spot. There are no discontinuous elements to create diffraction.Ports Where They Belong. Take a look at competitive monitors and you'll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners amplifying low frequency information which will color your mix. The superior design of the KRK VXT include front-firing ports, which are just the right shape to reduce port turbulence. You'll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.The VXT uses high-tech ABS Structural Foam in its cabinet. This material is very rugged and extremely impact resistant, and makes it possible for KRK engineers to create a speaker with no internal parallel walls, thereby preventing sound-coloring internal nodes. This material also has far better damping characteristics than traditional speaker materials which eliminates coloration caused by cabinet resonance.Revolutionary materials, Revolutionary Sound The new, stiffer, lighter woofer cone has an extruded aluminum pole piece and vented formers. This improves transient response, reduces distortion and extends low-frequency response due to this lighter, stiffer cone. The aluminum pole piece and venter formers eliminate overheating which improves performance.Catch A Wave, For A 3D Mix Our recessed silk-domed tweeters provide amazing high-end detail. Our careful design of dome and waveguide geometry coupled to the curved front baffle are optimized for on and off-axis linearity resulting in excellent imaging and a wider sweet spot. Features: 1" Silk Dome Neodymium Tweeter 4" Woven Kevlar Woofer Bi-amplified Design with Active Crossover Curved Front Panel for Enhanced Imaging Limiter with Defeat (and front panel indicator) Ground Lift Switch Auto Mute Peak SPL: 114dB Frequency Response: 37Hz to 20kHz Protective Switch CoversSpecifications: Drivers: Input: XLR-1/4" TRS Combo 10k Ohm Blanced Pin 1 + Sleeve = Ground Pin 2 + Tip = (+) High Pin 3 + Ring = (-) Low Controls: System Level Adjust: +6dB to -30dB Variable Ground Lift: LFT (On) or GND (Off) Clip Indicator: On, Off or Limit Auto Mute: On or Off HF Adjust - N/A LF Adjust - N/A Amp & Fusing: HF: 15 Watts LF: 30 Watts 2.0A 100VAC 50HZ 2.0A 110-120VAC 50/60Hz 1.0A 220-240VAC 50/60Hz Frequency Response: 59Hz - 22kHz +/- 2dB Max SPL: Omni Mount Part: 20.5 WBX Screw Type: M6 Screw Length: 12.5mm Min. - 17.5mm Max. Dimensions:(H x W x D): 10" x 7.37" x 7" 254mm x 187mm x 177mm Weight: 14 lbs (6.4 kg)
Description Of FADERPORT: #1 Authorized Presonus Internet Dealer! Features Summary: complete recording transport control high-quality Alps fader used in control surfaces costing over $10K+ touch sensitive, 100mm long throw motorized fader dual-servo drive belt motor design for fast and smooth operation write single channel or group channel volume automation write pan and mute automation 1024 steps of resolution pan control, mute, solo, record enable quick window selection (edit, mix, transport) rugged metal top plate rugged military-grade push buttons footswitch jack for hands free punch in/out compatible with all major recording software including Pro Tools, Cubase, Nuendo, Logic, and more Mac and Windows compatible
Description: The FaderPort puts the feel, vibe, and efficiency back into music recording and production. No more clicking through menus and drawing automation edits with a mouse. The easy-to-use FaderPort delivers complete transport control for fast and efficient recording along with ultra high quality, touch sensitivemotorized fader for writing fades and automation.The touch-sensitive, long throw motorizedfader on the FaderPort has the feel needed for recording perfect fades and writing volume, mute and pan automation in real-time. Solo and record enable can also be easily controlled with the FaderPort along with window selection, play, stop, record, and managing markers (locate points) for fast and easy recording. A foot switch jack is also included on the FaderPort for hands free punch-in/out recording. The FaderPort works with all Mac or Windows-based recording software including Pro Tools, Cubase, Nuendo, Logic and more.Not all Faders are created equal
FaderPort utilizes the same ultra high-quality Alps fader that is used in professional control surfaces and digital mixing consoles costing 200 times the price including DigiDesign's D-Command. The fader in the FaderPort utilizes a dual servo motorized drive belt system for fast-acting, accurate, and smooth operation. The FaderPort's 100mm long throw fader delivers 1024-step resolution for wrting ultra-fine and accurate fades and adjustments.
Important Documents:
(All links will open in a new pop-up window)
Technical Specifications: Computer system requirements: Windows XP or Mac OS X operating system one available USB portControl Emulation: Pro Tools, Logic, and Cubase/Nuendo (Mac) uses HUI Control. Cubase/Nuendo (Windows), Sonar and Digital Performer uses custom "native-mode" FaderPort control driver.Controls: PAN, MUTE, SOLO, REC, channel selection with BANK, OUTPUT (master fader), READ, WRITE, TOUCH, OFF (fader mode), Window View (MIX, PROJ {edit}, TRNS (transport), UNDO, START, END, PUNCH IN, USER, LOOP, REWIND, FAST FORWARD, STOP, PLAY RECORD. (functionality varies slightly between DAW software applications) Fader: Alps touch-sensative motorized model used in professional control surfaces including DigiDesign's D-Command Dual servo motorized drive beilt system for fast and quiet operation Ultra smooth feel and lightning fast Heavy-duty long life construction Extreme touch-sensitivity 100mm long throw for writing perfect fades Resolution 10-bit, 1024 stepsPower: operational via USB bus, motorized fader powered via 9V 1.2A DC external power supply (factory configured). Included Items: FaderPort, USB cable, power supply, rubber feet Size: Approx. 7" x 5.25" x 1.75" (18cm x 13cm x 4cm) Weight: Approx. 1 lb. Software Compatibility:
The FaderPort has been tested and approved to work with the following software: Native Mode: Cubase SX3 and later Digital Performer 4 and later Logic Express/Pro 7 and later Nuendo 3 and later Samplitude 10 Sequoia 10 Sonar 6 and later HUI Emulation: Cubase LE, SE, and SL 3 and earlier (with limitations) Nuendo 2 and earlier (with limitations) Pro Tools 6 and later Pro Tools M-Powered 6 and later
#1 Authorized Presonus Internet Dealer! Features Summary: Four High Power Headphone Outputs Ultra loud (150mW per channel) Ultra quiet operation Musical Wide Dynamic Range Control Room Monitor Outputs with Level Control Mono or Stereo Operation Monitor Mute Switch Daisy Chain an Infinite Number of Units Compact package
Description Of HP4: "To my amazement, your HP4 sounded as good as both of my hi-fi stereo heaphone amps. Very very clean and loud. I can't believe you put 150 mw per channel, @52 ohms, to four headphone outputs and offer such a quality unit for very little over $100."
- M. Burke, via email The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price.
Important Documents:
(All links will open in a new pop-up window)
Technical Specifications: