You are looking at a Yamaha Rio1608-D 16-in/8-out Stage Box w/Hard case rack. Pre-owned Stage Box. In good working condition. Please review photos carefully. PRG Case/Rack will be included as well as power cord. Item comes as shown in the pictures below..
Yamaha RIO1608-D Specifications:• Sampling frequency rate: Internal: 44.1kHz, 48kHz, 88.2kHz, 96kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% • Signal delay: Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz • Total harmonic distortion: Less than 0.05% 20Hz-20kHz+4dBu into 600?, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz+4dBu into 600?, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. • Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output 1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output 1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz • Dynamic range: 108dB typ., INPUT to OUTPUT, Input Gain = Min • Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min. • Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz • Power consumption: 70W • Dimensions: Width: 480mm (18 7/8in) Height: 144mm (5 3/4in) Depth: 361.5mm (14 1/4in Weight: )8.8kg (19.4lb)