Back to the main page Back to category Preamps and Channel Strips
musical instrument details
1 x Vintage 1960s British EMI mic Pre module - Custom Built Tube Valve
Estimated price for orientation: 1 399 $
Category: Preamps and Channel Strips
Class:
Description Condition: Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Country/Region of Manufacture: United Kingdom
For any more details you can get me here -
Admin@analogue-addicts.co.uk
Amazing quality single chan mic pre. We also do other dual chan version based on the same vintage modules
A custom racked vintage British EMI module from around 1962, as used it their high end recording equipment.
Fully restored and serviced to give the best possible noise levels and reliability while maintaining that classic British character. These are the top of the line units we sell are now becoming very hard to find What makes these so special over just about all modern units is the Mullard EF86 input gain stage, very warm and full of character which is why it was used in the classic REDD47 and EMI desks found at Abbey Road, most famous for the Beatles sound at the time.
Then you get the sparkly character from a mid stage ECC83 before the Mullard ECC82 output stage... all of this adds up to something quite magical sonicallyBroadcast grade Transformer balanced inputs set up for standard 200 250 ohm type use. Option for low impedance Ribbon mic transformer too as an upgradeTransformer balanced 600 ohm line output48v Phantom PowerVintage Mullard EF86 high gain input Valve/TubeECC83 mid gain stage Valve/TubeECC82 output stage Valve/TubeFully serviced componentsPower supply voltage options to suit your requirementsApprox 55db gainHi z 1/4" unbalanced inputXLR line input utilizing the full transformer/valve signal path to run line levels. Add some magic to just about anything!Please note each unit is serviced and rebuilt to order to match any mods, spec changes you might want. Please contact us for details.Custom front panel colours also available
Stock photo of a unit recently sold. Please allow around 2 to 3 weeks during busy periods for completion.
Stereo versions also available. Please note each unit is actually built to order so please allow time for use to sort that for you.
Please contact me for more info or links to demoshttps://www.facebook.com/pages/Analogue-Addicts-uk-Vintage-Valve-Mic-Preamps/500996753243751Please note each unit is hand built to order so please contact me for delivery times as we do get rather busy ;)
Declaration of safety checks prior to selling this vintage used unit. Sale of used vintage equipment. These units are from vintage British 1960s audio recording machines. We have serviced and fully tested to resell these and checked for electrical safety making small changes to comply with modern safety standards. The original units would not comply with modern electrical safety standards having vintage Bulgin style mains inlet sockets and exposed electrical contacts for voltage selections which would now have been considered a shock hazard by today’s safety standards. To make the units comply with modern safety standards we have now fitted the power supply internally to an enclosure where no hazardous connections are present from external use. This includes the fitting of a CE approved fused 3 pin IEC mains inlet socket to the rear panel and relevant safety earth has been fitted to the case and modules. Each unit is then safety tested with a PAT test meter.
This appliance must be earthed. Any repairs or service should be carried out by a competent engineer/technician.
Description
| Condition: | Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Country/Region of Manufacture: | United Kingdom |
For any more details you can get me here -
Admin@analogue-addicts.co.uk
Amazing quality single chan mic pre. We also do other dual chan version based on the same vintage modules
A custom racked vintage British EMI module from around 1962, as used it their high end recording equipment.
Fully restored and serviced to give the best possible noise levels and reliability while maintaining that classic British character. These are the top of the line units we sell are now becoming very hard to find What makes these so special over just about all modern units is the Mullard EF86 input gain stage, very warm and full of character which is why it was used in the classic REDD47 and EMI desks found at Abbey Road, most famous for the Beatles sound at the time.
Then you get the sparkly character from a mid stage ECC83 before the Mullard ECC82 output stage... all of this adds up to something quite magical sonicallyBroadcast grade Transformer balanced inputs set up for standard 200 250 ohm type use. Option for low impedance Ribbon mic transformer too as an upgradeTransformer balanced 600 ohm line output48v Phantom PowerVintage Mullard EF86 high gain input Valve/TubeECC83 mid gain stage Valve/TubeECC82 output stage Valve/TubeFully serviced componentsPower supply voltage options to suit your requirementsApprox 55db gainHi z 1/4" unbalanced inputXLR line input utilizing the full transformer/valve signal path to run line levels. Add some magic to just about anything!Please note each unit is serviced and rebuilt to order to match any mods, spec changes you might want. Please contact us for details.Custom front panel colours also available
Stock photo of a unit recently sold. Please allow around 2 to 3 weeks during busy periods for completion.
Stereo versions also available. Please note each unit is actually built to order so please allow time for use to sort that for you.
Please contact me for more info or links to demoshttps://www.facebook.com/pages/Analogue-Addicts-uk-Vintage-Valve-Mic-Preamps/500996753243751Please note each unit is hand built to order so please contact me for delivery times as we do get rather busy ;)
Declaration of safety checks prior to selling this vintage used unit. Sale of used vintage equipment. These units are from vintage British 1960s audio recording machines. We have serviced and fully tested to resell these and checked for electrical safety making small changes to comply with modern safety standards. The original units would not comply with modern electrical safety standards having vintage Bulgin style mains inlet sockets and exposed electrical contacts for voltage selections which would now have been considered a shock hazard by today’s safety standards. To make the units comply with modern safety standards we have now fitted the power supply internally to an enclosure where no hazardous connections are present from external use. This includes the fitting of a CE approved fused 3 pin IEC mains inlet socket to the rear panel and relevant safety earth has been fitted to the case and modules. Each unit is then safety tested with a PAT test meter.
This appliance must be earthed. Any repairs or service should be carried out by a competent engineer/technician.