Back to the main page Back to category Stage Lighting Controllers
musical instrument details
2 rack mount Doug Fleenor Model 125EE Enhanced2 DMX512 Isolated Splitter - used
Estimated price for orientation: 850 $
Category: Stage Lighting Controllers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Doug Fleenor Design Manufacturer Warranty: None Type: DMX Splitter Country/Region of Manufacture: United States Model: 125ee MPN: DMX512 Rack Mountable: No
Doug Fleenor Model 125EE Enhanced2 DMX512 Isolated Splitter2 units in a rack mount configuration willing to sell separately for $450 each - used -- retired from large attraction in central Florida because of renovationunits have been set up to operate off of 12V DC @ 1 amp. ( white is positive ) tested to power on onlyThe Enhanced2 Isolated Splitter [125EE] includes all the features of our standard models with added protection to meet the needs of harsh operating conditions. As with our standard splitters, all outputs are isolated from the input and from the other outputs by optical couplers. Every output has its own power supply and line driver. For protection against electrical storms, the 125EE adds four transient absorbers on the input, two on each output, and one on the power line. To protect against miswiring, it has self resetting fuses on the DMX512 input and outputs that protect the splitter against damaging voltages up to 120 volts. Indicators on each output display power and termination status. Indicators on the input display signal present and valid DMX. The 125EE allows connection of DMX receivers (dimmers, color changers, moving lights, etc.) in a star configuration as opposed to a daisy chain configuration. In a star configuration, each control cable is run to a central point, in this case the splitter. In a daisy chain configuration all the devices are connected on one control cable, the output of one feeding the input of the next. It is good practice to limit the number of receivers on a DMX512 output to 32 devices. The 125EE also gives you five outputs from one input allowing up to 160 receivers (32 per output).Baud rate: 0 to 250 Kilobaud Input circuit: EIA-485 receiver protected by two self resetting fuses 120 ohm input terminator protected by a self resetting fuse Four transorb diodes: two on +Data, two on -Data Input signal: 0.5 volts minimum, 12 volts maximum Input can withstand up to 120 volts without damage, transients up to 5KV Output circuit: Slew rate limited EIA-485 driver protected by two self reseting Polyswitch fuses. One transorb diode on +Data, one on -Data. (Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables) Output signal: EIA-485 driver yields an approximate 3 volt signal into 120 Ohms. Outputs can withstand up to 12 volts without damage, transients up to 5KV. Connectors: Gold plated 5 pin Neutrik D-1 Series (male input, female outputs) (3 pin connectors, terminal blocks, or RJ45 connectors optional) Isolation: 2500 volt optical coupler, 5000 volt split bobbin transformer Color: Silver hammertone with black front and back panels Size & weight: 11.25" deep, 1.74" high, 8.25" wide, 5 pounds (19" rack adapter available) Wall Mount. 2" deep, 8.5" high, 10.5" wide, 5 pounds. Mounting Hole Locations 6" Vertical 9.5" Horizonta
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Doug Fleenor Design |
| Manufacturer Warranty: | None | Type: | DMX Splitter |
| Country/Region of Manufacture: | United States | Model: | 125ee |
| MPN: | DMX512 | Rack Mountable: | No |
Doug Fleenor Model 125EE Enhanced2 DMX512 Isolated Splitter2 units in a rack mount configuration willing to sell separately for $450 each - used -- retired from large attraction in central Florida because of renovationunits have been set up to operate off of 12V DC @ 1 amp. ( white is positive ) tested to power on onlyThe Enhanced2 Isolated Splitter [125EE] includes all the features of our standard models with added protection to meet the needs of harsh operating conditions. As with our standard splitters, all outputs are isolated from the input and from the other outputs by optical couplers. Every output has its own power supply and line driver. For protection against electrical storms, the 125EE adds four transient absorbers on the input, two on each output, and one on the power line. To protect against miswiring, it has self resetting fuses on the DMX512 input and outputs that protect the splitter against damaging voltages up to 120 volts. Indicators on each output display power and termination status. Indicators on the input display signal present and valid DMX. The 125EE allows connection of DMX receivers (dimmers, color changers, moving lights, etc.) in a star configuration as opposed to a daisy chain configuration. In a star configuration, each control cable is run to a central point, in this case the splitter. In a daisy chain configuration all the devices are connected on one control cable, the output of one feeding the input of the next. It is good practice to limit the number of receivers on a DMX512 output to 32 devices. The 125EE also gives you five outputs from one input allowing up to 160 receivers (32 per output).Baud rate: 0 to 250 Kilobaud Input circuit: EIA-485 receiver protected by two self resetting fuses 120 ohm input terminator protected by a self resetting fuse Four transorb diodes: two on +Data, two on -Data Input signal: 0.5 volts minimum, 12 volts maximum Input can withstand up to 120 volts without damage, transients up to 5KV Output circuit: Slew rate limited EIA-485 driver protected by two self reseting Polyswitch fuses. One transorb diode on +Data, one on -Data. (Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables) Output signal: EIA-485 driver yields an approximate 3 volt signal into 120 Ohms. Outputs can withstand up to 12 volts without damage, transients up to 5KV. Connectors: Gold plated 5 pin Neutrik D-1 Series (male input, female outputs) (3 pin connectors, terminal blocks, or RJ45 connectors optional) Isolation: 2500 volt optical coupler, 5000 volt split bobbin transformer Color: Silver hammertone with black front and back panels Size & weight: 11.25" deep, 1.74" high, 8.25" wide, 5 pounds (19" rack adapter available) Wall Mount. 2" deep, 8.5" high, 10.5" wide, 5 pounds. Mounting Hole Locations 6" Vertical 9.5" Horizonta