Back to the main page Back to category Speaker Drivers and Horns
musical instrument details
2-TAD 2001 1", 8 ohm DRIVERS - ORIGINAL BERYLLIUM DIAPHRAGMS/PERFECT CONDITION
Estimated price for orientation: 1 525 $
Category: Speaker Drivers and Horns
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: TAD Model: 2001 Suited For: Mid-Range & Tweeter Frequencies Country/Region of Manufacture: Japan Type: Diaphragm Driver
I am a retired World-Wide Touring Pro-Audio Engineer that sold my rig on Ebay and now assist friends and Associates sell their Pro-Audio Gear.Here, we are selling 2 TAD 1" 2001 Drivers that are all original including the sought after Beryllium Diaphragms.SHIPPING IS FREE TO 48 CONTIGUOUS US STATES ... OTHER PLACES PLEASE CONTACT ME FOR YOUR QUOTE ... THX.They are 8 ohm Drivers.Below are the impressive specs : The TD-2001 is designed to an exceptionally wide frequency range of 500 to 22,000Hz, high efficiency and high dependability.DIAPHRAGM. A pure beryllium diaphragm is employed in the TD-2001. This diaphragm ensures rapid sound wave transmission, extremely flat frequency response, little cone breakup, excellent transient response and high sound image definition. Deformation is prevented by a surround formed of a special high-polymer compound. It also effectively prevents fatigue and rupture caused by an excessive input level.VOICE COIL. For the voice coil, the TD-2001 employs edgewise-wound aluminum ribbon wire, insulated in alumite film. This design provides an exceptionally high acoustic conversion efficiency. It is wound on a bobbin formed from a high-polymer compound having ideal heat resistance up to 752F (400C)MAGNETIC CIRCUIT. The magnetic circuit includes a 2.2 lb. (1kg) alnico magnet for a total magnetic flux of 68,500Mx. The center pole is capped by a ring of pure silver to prevent an increase in impedance (and resultant distortion) at high frequencies.DESIGN. A rear-compression mounting system is employed for the diaphragm and voice coil assembly. This assures enhanced clarity, for rear compression neatly avoids the resonance generated at the edge of the diaphragm. It also improves the phase uniformity of all frequencies, particularly highs, since they are emitted from virtually all points on the diaphragm. A phasing plug serves to eliminate phase disturbances at the throat region, for virtually flat frequency response.TD-2001 SPECIFICATIONS Voice coil impedance: 8 ohms. Voice coil diameter: 1-7/8 inches/48mm. Equalizing system: 3-slit type. Frequency range: 500 - 22,000Hz. Maximum input power: 30 watts (800Hz, -12dB/oct.). Sound pressure level: 109dB/W (1m). Crossover frequency: over 800Hz (-12dB/oct.). Total magnetic flux: 68,500 maxwells. Magnetic flux density: 18,000 gauss. Hole size for throat connection: 1 inch/25.4mm. Mounting dimensions: 3 inches/76.2mm (for 2 holes), 2-1/4 inches/57.2mm (for 3 holes). Weight: 14 lbs. 2 oz./6.4kg. Outer dimensions (diameter x depth): 5-9/16 x 4-3/16 inches/l41 x 107mm.Thank-You for looking and good-luck out there.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | TAD |
| Model: | 2001 | Suited For: | Mid-Range & Tweeter Frequencies |
| Country/Region of Manufacture: | Japan | Type: | Diaphragm Driver |
I am a retired World-Wide Touring Pro-Audio Engineer that sold my rig on Ebay and now assist friends and Associates sell their Pro-Audio Gear.Here, we are selling 2 TAD 1" 2001 Drivers that are all original including the sought after Beryllium Diaphragms.SHIPPING IS FREE TO 48 CONTIGUOUS US STATES ... OTHER PLACES PLEASE CONTACT ME FOR YOUR QUOTE ... THX.They are 8 ohm Drivers.Below are the impressive specs : The TD-2001 is designed to an exceptionally wide frequency range of 500 to 22,000Hz, high efficiency and high dependability.DIAPHRAGM. A pure beryllium diaphragm is employed in the TD-2001. This diaphragm ensures rapid sound wave transmission, extremely flat frequency response, little cone breakup, excellent transient response and high sound image definition. Deformation is prevented by a surround formed of a special high-polymer compound. It also effectively prevents fatigue and rupture caused by an excessive input level.VOICE COIL. For the voice coil, the TD-2001 employs edgewise-wound aluminum ribbon wire, insulated in alumite film. This design provides an exceptionally high acoustic conversion efficiency. It is wound on a bobbin formed from a high-polymer compound having ideal heat resistance up to 752F (400C)MAGNETIC CIRCUIT. The magnetic circuit includes a 2.2 lb. (1kg) alnico magnet for a total magnetic flux of 68,500Mx. The center pole is capped by a ring of pure silver to prevent an increase in impedance (and resultant distortion) at high frequencies.DESIGN. A rear-compression mounting system is employed for the diaphragm and voice coil assembly. This assures enhanced clarity, for rear compression neatly avoids the resonance generated at the edge of the diaphragm. It also improves the phase uniformity of all frequencies, particularly highs, since they are emitted from virtually all points on the diaphragm. A phasing plug serves to eliminate phase disturbances at the throat region, for virtually flat frequency response.TD-2001 SPECIFICATIONS Voice coil impedance: 8 ohms. Voice coil diameter: 1-7/8 inches/48mm. Equalizing system: 3-slit type. Frequency range: 500 - 22,000Hz. Maximum input power: 30 watts (800Hz, -12dB/oct.). Sound pressure level: 109dB/W (1m). Crossover frequency: over 800Hz (-12dB/oct.). Total magnetic flux: 68,500 maxwells. Magnetic flux density: 18,000 gauss. Hole size for throat connection: 1 inch/25.4mm. Mounting dimensions: 3 inches/76.2mm (for 2 holes), 2-1/4 inches/57.2mm (for 3 holes). Weight: 14 lbs. 2 oz./6.4kg. Outer dimensions (diameter x depth): 5-9/16 x 4-3/16 inches/l41 x 107mm.Thank-You for looking and good-luck out there.