Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR MANUFACTURER

Authorized Audio Technica Dealer! Audio-Technica’s advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica’s versatile Personal Mix Control, which allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly. Features: High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume 1321 selectable UHF channels with automatic frequency scanning Up to 16 simultaneous systems per frequency band Three receiver modes: Personal Mix, stereo, and mono Personal Mix Control allows volume and mix control of two independent signals at the receiver LCD information display offers step-through menus for setting preferences XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation Adjustable squelch eliminates annoying static Pilot tone protects against RF interference when transmitter is turned off Multi-level limiter (defeatable) helps protect hearing from sudden peaks Portable system is quick to load and set up Reduces on-stage audio clutter for better overall mix & less feedback Use any number of Stereo Receivers (with individual mixes) on the same frequency Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation Personal fit with 3 sizes of rubber eartips plus ear-conforming foam tips Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level inputSpecifications: Overall System Specifications: Operating Frequencies: Band E: 790.000 to 822.000 MHz, 1281 frequencies Band F: 832.000 to 865.000 MHz, 1282 frequencies Band L: 575.000 to 608.000 MHz, 1321 frequencies Band M: 614.000 to 647.000 MHz, 1321 frequencies Minimum Frequency Step: 25 kHz Modulation Mode: FM stereo Maximum Deviation: ±40 kHz Dynamic Range: 90 dB (typical), A-weighted Total Harmonic Distortion: <1% at (1 kHz, ±20 kHz Deviation) Operating Range: 100 m (300'), typical Operating Temperature Range: -5° C (23° F) to +50° C (122° F) Frequency Response: 60 Hz to 13 kHz (+/- 3 dB) Simultaneous Use: 16 channels per band (maximum recommended)Receiver Specifications Receiving System: Double conversion superheterodyne RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination) Headphone Output Connector: 3.5 mm TRS stereo phone jack Headphone Output Power: 65 mW (at 32 ohms) Antenna Input: SMA-type, 50 ohms Aux Input Connector: 3.5 mm TRS stereo phone jack Batteries: 2 x 1.5V AA (not included) Battery Life: 8 hours (alkaline) Dimensions: 70.0 mm (2.76") W, 25.0 mm (0.98") D, 110.0 mm (4.33") H Accessories Included: EP3 earphone; flexible antennaTransmitter Specifications RF Power Output: 10 mW/50 mW (switchable), 50 ohms Limited to 10 mW within 863 MHz to 865 MHz Following national regulations Spurious Emissions: Following federal and national regulations Input Connections: XLRF-type/6.3 mm stereo (1/4") combination connector Pin 1 and Sleeve: Ground Pin 2 and Tip: Hot Pin 3 and Ring: Cold Maximum Input Level: XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu 6.3 mm (1/4") mono, unbalanced: +26 dBu Loop Output Connector: XLRM-type connector Pin 1: Ground Pin 2: Hot Pin 3: Cold Power Requirement: 12-18V DC, 600 mA Headphone Output Connector: 6.3 mm (1/4") TRS stereo phone jack Headphone Output Power: 120 mW at 32 ohms Antenna Connector: BNC, 50 ohms Dimensions: 210.0 mm (8.30") W, 132.0 mm (5.20") D,44.0 mm (1.70") H Accessories Included: AC adapter (country dependant); rack mount adapters; flexible antenna

---

Advantages of purchasing from an authorized seller: Best prices - We sell all Audio Technica Products at the minimum advertised price allowed by the manufacturer. Full Factory Warranty Detailed information of all products Lifetime Customer Service by Audio Technica product Experts Guaranteed legitimate and authentic merchandise Please note: If you purchase Audio Technica from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy. Prior to returning merchandise, contact us and we will give you a return authorization #. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us. Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options: You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit. You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us. Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.