Back to the main page Back to category Shure BETA 98S Microphone hrefht
musical instrument details
Shure BLX188/CVL Dual Bodypack Lavalier Combo Wireless Mic. System.
Estimated price for orientation: 539 $
Category: Shure BETA 98S Microphone hrefht
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Shure MPN: Does Not Apply Model: BLX188/CVL UPC: Does not apply
Available Frequency Band : H9(512-542MHz),H10(542-572MHz) - note for your Band,or ship either one.The BLX188/CVL Dual Channel Lavalier Wireless System is part of the wireless systems family. Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. Includes BLX88 dual-channel receiver, 2 BLX1 bodypack transmitters, 2 CVL lavalier microphones, lavalier clip, windscreens, and user guide.In the Box Bundle Items CVL Centraverse Lavalier Condenser Microphone Type Electret condenser Frequency Response 50 Hz to 20 kHz Polar Pattern Cardioid Output Impedance 600 Ω @ 1 kHz, typical Audio Output Level -43.5 dBV/Pa Signal to Noise Ratio 72 dB @ 1 kHz Maximum SPL 139 dB, @ 1 kHz (1,000 Ω load) Dynamic Range 117 dB, @ 1 kHz (1,000 Ω load) Output Noise 22 dB, typical, A-weighted Power Requirements +5 V DC (nominal), 10 V maximum (DC bias) Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 Cable 50" (1.3 m) Connector TA4F Weight 0.88 oz (25 g)
Box Dimensions (LxWxH) 7.7 x 5.0 x 3.1"
BLX1 Bodypack Transmitter Audio Input Gain: -16 dBV (Maximum), 10 dBV (Minimum) Gain Adjustment Range 26 dB Input Impedance 1 MOhm RF Output 10 mW, Typical Housing Molded ABS Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline Battery Life Up to 14 Hours Dimensions (H x W x D) 4.3 x 2.5 x 0.8" (110 x 64 x 21 mm) Weight 2.6 oz (75 g)
Box Dimensions (LxWxH) 11.1 x 5.3 x 3.0"
BLX88 Dual-Channel Wireless Receiver Output 2x XLR Output
2x 1/4" (6.35 mm) Output Output Impedance XLR: 200 ohms
1/4": 50 ohms Audio Output Level XLR Connector: -20.5 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
1/4": -13 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone) RF Sensitivity -105 dBm for 12 dB SINAD, Typical Image Rejection >50 dB, Typical Housing Molded ABS Power Requirement 12 to 15 VDC @ 320 mA, Supplied by External Power Supply (Tip Positive) Dimensions (H x W x D) 1.5 x 15 x 4.5" (40 x 388 x 116 mm) Weight 15.1 oz (429 g)
Box Dimensions (LxWxH) 19.1 x 16.2 x 3.6"
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Shure |
| MPN: | Does Not Apply | Model: | BLX188/CVL |
| UPC: | Does not apply |
Available Frequency Band : H9(512-542MHz),H10(542-572MHz) - note for your Band,or ship either one.The BLX188/CVL Dual Channel Lavalier Wireless System is part of the wireless systems family.
Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. Includes BLX88 dual-channel receiver, 2 BLX1 bodypack transmitters, 2 CVL lavalier microphones, lavalier clip, windscreens, and user guide.In the Box Bundle Items CVL Centraverse Lavalier Condenser Microphone
| Type | Electret condenser |
| Frequency Response | 50 Hz to 20 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 600 Ω @ 1 kHz, typical |
| Audio Output Level | -43.5 dBV/Pa |
| Signal to Noise Ratio | 72 dB @ 1 kHz |
| Maximum SPL | 139 dB, @ 1 kHz (1,000 Ω load) |
| Dynamic Range | 117 dB, @ 1 kHz (1,000 Ω load) |
| Output Noise | 22 dB, typical, A-weighted |
| Power Requirements | +5 V DC (nominal), 10 V maximum (DC bias) |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 |
| Cable | 50" (1.3 m) |
| Connector | TA4F |
| Weight | 0.88 oz (25 g) |
| Box Dimensions (LxWxH) | 7.7 x 5.0 x 3.1" |
BLX1 Bodypack Transmitter
| Audio Input | Gain: -16 dBV (Maximum), 10 dBV (Minimum) |
| Gain Adjustment Range | 26 dB |
| Input Impedance | 1 MOhm |
| RF Output | 10 mW, Typical |
| Housing | Molded ABS |
| Power Requirement | 2x LR6 AA Batteries, 1.5 V Alkaline |
| Battery Life | Up to 14 Hours |
| Dimensions (H x W x D) | 4.3 x 2.5 x 0.8" (110 x 64 x 21 mm) |
| Weight | 2.6 oz (75 g) |
| Box Dimensions (LxWxH) | 11.1 x 5.3 x 3.0" |
BLX88 Dual-Channel Wireless Receiver
| Output | 2x XLR Output 2x 1/4" (6.35 mm) Output |
| Output Impedance | XLR: 200 ohms 1/4": 50 ohms |
| Audio Output Level | XLR Connector: -20.5 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone) 1/4": -13 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone) |
| RF Sensitivity | -105 dBm for 12 dB SINAD, Typical |
| Image Rejection | >50 dB, Typical |
| Housing | Molded ABS |
| Power Requirement | 12 to 15 VDC @ 320 mA, Supplied by External Power Supply (Tip Positive) |
| Dimensions (H x W x D) | 1.5 x 15 x 4.5" (40 x 388 x 116 mm) |
| Weight | 15.1 oz (429 g) |
| Box Dimensions (LxWxH) | 19.1 x 16.2 x 3.6" |