| | | Zoom UAC-8 USB 3.0 Interface and Audio-Technica AT2050 Microphone | | | This is a no hassle BUY IT NOW listing for your convenience with FREE EXPEDITED SHIPPING in the continental United States! | | | | Brand New Zoom UAC-8 with Full Factory WarrantyUSB 3.0 SuperSpeed Audio Converter for Mac and PCRetail Price: $779.99Includes:
(1) Zoom UAC-8 USB 3.0 Audio Converter
(1) 1m USB 3.0 Cable
(1) Cubase LE Download
(1) Cubase LE Startup Guide
(1) Operator's Instructions | | | Click on an image to open in new window |
| | | Description | There’s a whole new world of possibilities for Mac and PC Creators — high-speed, high-resolution, and low-latency. Upgrade your rig with the rackmountable UAC-8, and add 18 inputs and 20 outputs to your USB 3.0-equipped Mac or Windows computer—even your iPad.* Plug in a microphone, line-level device, or instrument and start bringing your ideas to life, or take the UAC-8 onstage to enable high-res audio playback, all the way up to 24-bit/192 kHz. USB 3.0 SuperSpeed
The USB 3.0 SuperSpeed transfer protocol used by the UAC-8, with a speed of 2.0 ms roundtrip @ 96 kHz / 32 samples, is ten times faster than USB 2.0 and six times faster than FireWire 800. That not only ensures low latency, it provides a data stream that's unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source.The Hardware
INPUTS
The UAC-8 provides a wide variety of both analog and digital connectors. 8 front panel combo XLR/TRS inputs accept mic- and line-level signals, and you can even plug instruments directly into Inputs 1 and 2. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a Phantom Power switch enables the use of condenser microphones.OUTPUTS
The UAC-8 has dual balanced analog TRS output jacks for connection to monitors, and there are also 8 discrete balanced TRS analog line outputs for multichannel monitoring or connection to external effects devices. A large front-panel Output knob offers fast control over output level, and there are two independent ¼" stereo headphone jacks, each with its own dedicated volume control, for private monitoring.DIGITAL I/O
8 ADAT and stereo S/PDIF digital inputs/outputs allow for the connection of up to 10 external channels, and built-in Word Clock enables easy integration into any system. In addition, MIDI In and Out is provided to allow interfacing with devices such as electronic keyboards and drum machines.Upsampling, Standalone Mode
The UAC-8 uses high-end components such as the AKM AK5388 analog-to-digital converter and AKM AK4413 digital-to-analog converter. In addition, the UAC-8 performs 4-times upsampling during both analog-to-digital and digital-to-analog conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-8 processes the signal at high resolution 176.4 kHz or 192 kHz.For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity.In standalone mode, the UAC-8 can be used as an 8-channel mic preamp and analog-to-digital or digital-to-analog converter without being connected to a computer.Extend your capabilities with software
UAC-8 MixEfx is a free Macintosh and Windows compatible application designed specially by Zoom for the UAC-8. It provides a comprehensive onscreen mixer, with independent level, phase reversal, and panning control for each channel. UAC-8 MixEfx also allows you to freely route all inputs to all outputs and to create custom mixes. In addition, MixEfx features effects like reverb and echo, and complete mixes can be stored in three different memory slots, allowing instant recall. | | | Features: | Specifications: | | 18-in/20-out USB 3.0 SuperSpeed audio interfaceStandalone mode allows use as an 8-channel mic preamp and A/D or D/A converter without connection to a computerSupport for recording and playback of up to 24-bit/192 kHz high-resolution audioLow latency audio streaming8 combo balanced XLR/TRS analog input connectors accept both mic and line-level signalHigh-performance mic preamps with up to +60dB of amplificationHi-Z switches allow direct connection of electric guitar or bass (INPUT1, INPUT2)Independent gain controls and clip LEDs for each inputSwitchable +48 V phantom power (INPUTS 1-4, INPUTS 5-8)10 balanced TRS output jacks for connection to mixers, amplifiers, self-powered speakers, headphones, or effects devicesDual front-panel 1/4" headphone outputs with dedicated volume controlsLarge knob output volume control4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelityAsynchronous transfer system unaffected by computer jitterS/PDIF IN/OUT: 2IN / 2OUT, up to 24-bit/192 kHz ADAT Optical IN/OUT: 2 IN / 2 OUT at 192/176.4 kHz (S/MUX4 compatible), 4 IN/4 OUT at 96/88.2 kHz (S/MUX compatible), 8 IN / 8 OUT at 48/44.1 kHzWord Clock in/out Clock source indicatorMIDI in/outRack-mountable (1U space)Robust metal housingWorks with all USB 3.0-equipped Mac and Windows computers and Apple iPad (Apple Camera Connection kit or Lightning to USB Camera Adapter required) | Input connectors 1-8: XLR/TRS combo jacks (XLR: 2 hot / TRS: TIP hot)Input gain: 0 to 60dB in 1dB stepsInput impedance: 5kOhm (1 MOhm (When IN1/IN2 Hi-Z on)Maximum input level: +13 dBu (XLR at 0 dBFS), +21 dBu (TRS at 0 dBFS)Phantom power: +48VL/R OUTPUT Type: TRS jacks (balanced)LINE OUTPUTS 1-8 Maximum output level: +14 dBu (@0dBFs)LINE OUTPUTS 1-8 Output impedance: 150 OhmPHONES OUTPUT 1/2 Type: Standard stereo phone jacks, 20 mW × 2 (into 32 Ohm load)PHONES OUTPUT 1/2 Maximum output level: +10 dBu (@0dBFs)PHONES OUTPUT 1/2 Output impedance: 33OhmDYNAMIC RANGE: A/D: 118dB typical (IHF-A), D/A:120dB typical (IHF-A)S/PDIF Connectors: RCA (coaxial)S/PDIF Supported sampling frequencies: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHzFrequency characteristics: -1.0 dB: 20 Hz - 60 kHz @ 192kHz, -1.0 dB: 20 Hz - 40 kHz @ 96kHz, -1.0 dB: 20 Hz - 20 kHz @ 44.1kHzInput conversion noise (EIN): -125dBu (IHF-A) @ 60dB, 150Ohm inputSampling frequencies: 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHzBit depth: 24-bitInterface: USB 3.0MIDI In/Out: 5-pin DIN jackPower supply: AD-19 DC12V 2A AC adapterDimensions: 6.2 in. (D) × 19 in. (W) × 1.8 in. (H), 157.65 mm (D) × 482.6 mm (W) × 46.03 mm (H)Weight: 4.4 pounds / 2.02 kgWORD CLOCK Connectors: BNCWORD CLOCK Supported sampling frequencies: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHzWORD CLOCK Output impedance: 75 Ohm | |
| | Brand New Audio-Technica AT2050 with Full Factory WarrantyMulti Pattern Studio Condenser MicrophoneRetail Price: $369.00Includes:
(1) AT2050 Microphone
(1) AT8458 shock mount for 5/8"-27 threaded stands
(1) 5/8"-27 to 3/8"-16 threaded adapter
(1) Soft protective case |
| | | Description | | The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. | | | Features: | Specifications: | | Three switchable polar patterns: omni, cardioid, figure-of-eightSwitchable 80 Hz high-pass filter and 10 dB padLarge diaphragm for smooth, natural sound and low noiseState-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standardsIncludes shock mount & protective pouch | ELEMENT: Externally-polarized (DC bias) condenserPOLAR PATTERNS: Cardioid, Omnidirectional, Figure-of-EightFREQUENCY RESPONSE: 20-20,000 HzLOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octaveOPEN CIRCUIT SENSITIVITY: –42 dB (7.9 mV) re 1V at 1 PaIMPEDANCE: 120 ohmsMAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)NOISE: 17 dB SPLDYNAMIC RANGE (TYPICAL): 132 dB, 1 kHz at Max SPLSIGNAL-TO-NOISE RATIO: 77 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS: 11-52V DC, 4.7 mA typicalSWITCHES: Polar selection; Flat, roll-off; 10 dB pad (nominal)WEIGHT: 412 g (14.5 oz)DIMENSIONS: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameterOUTPUT CONNECTORS: Integral 3-pin XLRM-typeACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAUDIO-TECHNICA CASE STYLE: R5 | |
| | Brand New Hosa MBL-110 with Full Factory WarrantyStandard Microphone CableRetail Price: $13.65Includes:
(1) Hosa 10' Standard Mic Cable |
| | | Description | | Standard 10 ft. Microphone Cable. | | | Features: | Specifications: | | Use to connect mics to mic preamps and mixing consolesBlack connectors disappear on stageA cost-effective solution for light- and medium-duty applications | Length: 10 ft.Conductor: 22 AWG X 2Shield: OFC BraidConnectors: Hosa Pro Black | |
| | | Return Policy:
We want you to be completely satisfied with your purchase from FP Logistics on eBay. Most unused merchandise in re-sellable condition with all original packaging and accessories may be returned for a refund within 30 days of purchase. In the event that you want to return your purchase to FP Logistics, please use the "Return this item" button from your eBay order history.Re-stocking Fees and Shipping Charges
All returns are subject to a re-stocking fee. Any shipping and handling charges are non-refundable.Partial Returns
To be eligible for a refund, all of the items included with the purchase must be returned. In the case of an incomplete return, no refund will be given. Non-Returnable Items
There are a few item types that are not eligible for return. Please refer to this specific product's return policy in the "Shipping and Payments" tab for full details. |
| 