Back to the main page Back to category Zoom Uac8 USB 30 SuperSpeed Audi
musical instrument details
NEW Zoom UAC-8 USB 3.0 Audio Interface w/ Cubase LE8 UAC8
Estimated price for orientation: 599 $
Category: Zoom Uac8 USB 30 SuperSpeed Audi
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition MPN: ZUAC8 Brand: Zoom UPC: 884354014964
This brand new Zoom UAC-8 Audio Converter comes bundled with Cubase LE. Condition:
Brand new. Product Details:
THE ZOOM UAC-8 is a SuperSpeed USB 3.0 Audio Converter for Mac and PC. There’s a whole new world of possibilities for Mac and PC Creators — high-speed, high-resolution, and low-latency. Upgrade your rig with the rackmountable UAC-8, and add 18 inputs and 20 outputs to your USB 3.0-equipped Mac or Windows computer—even your iPad.* Plug in a microphone, line-level device, or instrument and start bringing your ideas to life, or take the UAC-8 onstage to enable high-res audio playback, all the way up to 24-bit/192 kHz. USB 3.0 SuperSpeed - The SuperSpeed USB 3.0 transfer protocol used by the UAC-8, with a speed of 2.0 ms roundtrip @ 96 kHz / 32 samples, is ten times faster than USB 2.0 and six times faster than FireWire 800. That not only ensures low latency, it provides a data stream that's unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source. The Hardware - The UAC-8 provides a wide variety of both analog and digital connectors. 8 front panel combo XLR/TRS inputs accept mic- and line-level signals, and you can even plug instruments directly into Inputs 1 and 2. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a Phantom Power switch enables the use of condenser microphones. The UAC-8 has dual balanced analog TRS output jacks for connection to monitors, and there are also 8 discrete balanced TRS analog line outputs for multichannel monitoring or connection to external effects devices. A large front-panel Output knob offers fast control over output level, and there are two independent ¼" stereo headphone jacks, each with its own dedicated volume control, for private monitoring. 8 ADAT and stereo S/PDIF digital inputs/outputs allow for the connection of up to 10 external channels, and built-in Word Clock enables easy integration into any system. In addition, MIDI In and Out is provided to allow interfacing wwith devices such as electronic keyboards and drum machines. Upsampling, Standalone Mode - The UAC-8 uses high-end components such as the AKM AK5388 analog-to-digital converter and AKM AK4413 digital-to-analog converter. In addition, the UAC-8 performs 4-times upsampling during both analog-to-digital and digital-to-analog conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-8 processes the signal at high resolution 176.4 kHz or 192 kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity. In standalone mode, the UAC-8 can be used as an 8-channel mic preamp and analog-to-digital or digital-to-analog converter without being connected to a computer. 18‐in/20‐out SuperSpeed USB 3.0 audio interface Standalone mode allows use as an 8-channel mic preamp and A/D or D/A converter without connection to a computer Support for recording and playback of up to 24‐bit/192 kHz high‐resolution audio Low latency audio streaming 8 combo balanced XLR/TRS analog input connectors accept both mic and line‐level signal High‐performance mic preamps with up to +60 dB of amplification Hi‐Z switches allow direct connection of electric guitar or bass (INPUT1, INPUT2) Independent gain controls and clip LEDs for each input Switchable +48V phantom power (INPUTS 1‐4, INPUTS 5‐8) 10 balanced TRS output jacks for connection to mixers, amplifiers, self‐powered speakers, headphones, or effects devices Dual front-panel 1/4" headphone outputs with dedicated volume controls Large knob output volume control 4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity Asynchronous transfer system unaffected by computer jitter S/PDIF IN/OUT: 2IN / 2OUT, up to 24‐bit/192 kHz ADAT Optical IN/OUT: 2 IN / 2 OUT at 192/176.4 kHz (S/MUX4 compatible), 4 IN/4 OUT at 96/88.2 kHz (S/MUX compatible), 8 IN / 8 OUT at 48/44.1 kHz Word Clock in/out Clock source indicator MIDI in/out Rack-mountable (1U space) Robust metal housing Works with all USB 3.0-equipped Mac and Windows computers and Apple iPad (Apple Camera Connection kit or Lightning to USB Camera Adapter required
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | MPN: | ZUAC8 |
| Brand: | Zoom | UPC: | 884354014964 |
This brand new Zoom UAC-8 Audio Converter comes bundled with Cubase LE. Condition:
Brand new. Product Details:
THE ZOOM UAC-8 is a SuperSpeed USB 3.0 Audio Converter for Mac and PC. There’s a whole new world of possibilities for Mac and PC Creators — high-speed, high-resolution, and low-latency. Upgrade your rig with the rackmountable UAC-8, and add 18 inputs and 20 outputs to your USB 3.0-equipped Mac or Windows computer—even your iPad.* Plug in a microphone, line-level device, or instrument and start bringing your ideas to life, or take the UAC-8 onstage to enable high-res audio playback, all the way up to 24-bit/192 kHz. USB 3.0 SuperSpeed - The SuperSpeed USB 3.0 transfer protocol used by the UAC-8, with a speed of 2.0 ms roundtrip @ 96 kHz / 32 samples, is ten times faster than USB 2.0 and six times faster than FireWire 800. That not only ensures low latency, it provides a data stream that's unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source. The Hardware - The UAC-8 provides a wide variety of both analog and digital connectors. 8 front panel combo XLR/TRS inputs accept mic- and line-level signals, and you can even plug instruments directly into Inputs 1 and 2. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a Phantom Power switch enables the use of condenser microphones. The UAC-8 has dual balanced analog TRS output jacks for connection to monitors, and there are also 8 discrete balanced TRS analog line outputs for multichannel monitoring or connection to external effects devices. A large front-panel Output knob offers fast control over output level, and there are two independent ¼" stereo headphone jacks, each with its own dedicated volume control, for private monitoring. 8 ADAT and stereo S/PDIF digital inputs/outputs allow for the connection of up to 10 external channels, and built-in Word Clock enables easy integration into any system. In addition, MIDI In and Out is provided to allow interfacing wwith devices such as electronic keyboards and drum machines. Upsampling, Standalone Mode - The UAC-8 uses high-end components such as the AKM AK5388 analog-to-digital converter and AKM AK4413 digital-to-analog converter. In addition, the UAC-8 performs 4-times upsampling during both analog-to-digital and digital-to-analog conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-8 processes the signal at high resolution 176.4 kHz or 192 kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity. In standalone mode, the UAC-8 can be used as an 8-channel mic preamp and analog-to-digital or digital-to-analog converter without being connected to a computer. 18‐in/20‐out SuperSpeed USB 3.0 audio interface Standalone mode allows use as an 8-channel mic preamp and A/D or D/A converter without connection to a computer Support for recording and playback of up to 24‐bit/192 kHz high‐resolution audio Low latency audio streaming 8 combo balanced XLR/TRS analog input connectors accept both mic and line‐level signal High‐performance mic preamps with up to +60 dB of amplification Hi‐Z switches allow direct connection of electric guitar or bass (INPUT1, INPUT2) Independent gain controls and clip LEDs for each input Switchable +48V phantom power (INPUTS 1‐4, INPUTS 5‐8) 10 balanced TRS output jacks for connection to mixers, amplifiers, self‐powered speakers, headphones, or effects devices Dual front-panel 1/4" headphone outputs with dedicated volume controls Large knob output volume control 4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity Asynchronous transfer system unaffected by computer jitter S/PDIF IN/OUT: 2IN / 2OUT, up to 24‐bit/192 kHz ADAT Optical IN/OUT: 2 IN / 2 OUT at 192/176.4 kHz (S/MUX4 compatible), 4 IN/4 OUT at 96/88.2 kHz (S/MUX compatible), 8 IN / 8 OUT at 48/44.1 kHz Word Clock in/out Clock source indicator MIDI in/out Rack-mountable (1U space) Robust metal housing Works with all USB 3.0-equipped Mac and Windows computers and Apple iPad (Apple Camera Connection kit or Lightning to USB Camera Adapter required
Brand new. Product Details:
THE ZOOM UAC-8 is a SuperSpeed USB 3.0 Audio Converter for Mac and PC. There’s a whole new world of possibilities for Mac and PC Creators — high-speed, high-resolution, and low-latency. Upgrade your rig with the rackmountable UAC-8, and add 18 inputs and 20 outputs to your USB 3.0-equipped Mac or Windows computer—even your iPad.* Plug in a microphone, line-level device, or instrument and start bringing your ideas to life, or take the UAC-8 onstage to enable high-res audio playback, all the way up to 24-bit/192 kHz. USB 3.0 SuperSpeed - The SuperSpeed USB 3.0 transfer protocol used by the UAC-8, with a speed of 2.0 ms roundtrip @ 96 kHz / 32 samples, is ten times faster than USB 2.0 and six times faster than FireWire 800. That not only ensures low latency, it provides a data stream that's unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source. The Hardware - The UAC-8 provides a wide variety of both analog and digital connectors. 8 front panel combo XLR/TRS inputs accept mic- and line-level signals, and you can even plug instruments directly into Inputs 1 and 2. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a Phantom Power switch enables the use of condenser microphones. The UAC-8 has dual balanced analog TRS output jacks for connection to monitors, and there are also 8 discrete balanced TRS analog line outputs for multichannel monitoring or connection to external effects devices. A large front-panel Output knob offers fast control over output level, and there are two independent ¼" stereo headphone jacks, each with its own dedicated volume control, for private monitoring. 8 ADAT and stereo S/PDIF digital inputs/outputs allow for the connection of up to 10 external channels, and built-in Word Clock enables easy integration into any system. In addition, MIDI In and Out is provided to allow interfacing wwith devices such as electronic keyboards and drum machines. Upsampling, Standalone Mode - The UAC-8 uses high-end components such as the AKM AK5388 analog-to-digital converter and AKM AK4413 digital-to-analog converter. In addition, the UAC-8 performs 4-times upsampling during both analog-to-digital and digital-to-analog conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-8 processes the signal at high resolution 176.4 kHz or 192 kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity. In standalone mode, the UAC-8 can be used as an 8-channel mic preamp and analog-to-digital or digital-to-analog converter without being connected to a computer. 18‐in/20‐out SuperSpeed USB 3.0 audio interface Standalone mode allows use as an 8-channel mic preamp and A/D or D/A converter without connection to a computer Support for recording and playback of up to 24‐bit/192 kHz high‐resolution audio Low latency audio streaming 8 combo balanced XLR/TRS analog input connectors accept both mic and line‐level signal High‐performance mic preamps with up to +60 dB of amplification Hi‐Z switches allow direct connection of electric guitar or bass (INPUT1, INPUT2) Independent gain controls and clip LEDs for each input Switchable +48V phantom power (INPUTS 1‐4, INPUTS 5‐8) 10 balanced TRS output jacks for connection to mixers, amplifiers, self‐powered speakers, headphones, or effects devices Dual front-panel 1/4" headphone outputs with dedicated volume controls Large knob output volume control 4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity Asynchronous transfer system unaffected by computer jitter S/PDIF IN/OUT: 2IN / 2OUT, up to 24‐bit/192 kHz ADAT Optical IN/OUT: 2 IN / 2 OUT at 192/176.4 kHz (S/MUX4 compatible), 4 IN/4 OUT at 96/88.2 kHz (S/MUX compatible), 8 IN / 8 OUT at 48/44.1 kHz Word Clock in/out Clock source indicator MIDI in/out Rack-mountable (1U space) Robust metal housing Works with all USB 3.0-equipped Mac and Windows computers and Apple iPad (Apple Camera Connection kit or Lightning to USB Camera Adapter required