QSC K12 Package
One pair of QSC K12 Speakers with Ultimate Support TS-100B Air Powered Speaker Stands

QSC K12 1000 Watt Powered 12" Speaker/Monitor Lightweight portable powered speakers with legendary QSC amplifier power and reliability1000 watt continuous Class D power modules in all modelsExtensive DSP enhances system performanceAttractive and professional appearanceRugged ABS enclosures Tour-grade 18 gauge steel grillesComfortable ergonomic handles 35 mm pole sockets with Tilt-Direct™ (fullrange models)The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size. Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight. Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications. Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility. On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP™ for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.     Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability. The K Series fullrange models feature a unique pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).
      (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones., first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field. and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies. protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.     

SPECIFICATIONS	K12
Configuration	Multipurpose 2-way
Transducers   Low-frequency   High-frequency	12" cone transducer 1.75" diaphragm compression driver
Frequency Response (-6 dB)	52 Hz - 18 kHz
Frequency Range (-10 dB)	48 Hz - 20 kHz
Nominal Coverage (-6 dB)	75° conical
Maximum SPL (1 meter)	131 dB peak
Amplifiers
Power Output	1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak
Input Impedance (ohms)	XLR / ¼": 40k balanced / 20k unbalanced XLR / ¼" MIC mode: 2260 balanced RCA: 10k
Controls	Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators	Power, Signal A, Signal B, Standby, Limit, Mic
Connectors	Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling	On demand, 50 mm variable speed fan
Amplifier Protection	Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection	Thermal limiting, excursion limiting
AC Power Input	Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)	100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A
Enclosure
Material	Impact resistant ABS
Finish	Black paint
Grille	Black powder coated 18 gauge steel
Dimensions (HWD)	23.7" x 14" x 14" 603 mm x 356 mm x 356 mm
Weight (Net)	41 lb / 18.6 kg
Available Accessories	K12 TOTE, K12 YOKE, K SERIES M10 KIT

 
ULTIMATE SUPPORT TS-100B
AIR POWERED SPEAKER STANDSAir-Powered Series speaker stands from Ultimate Support represent everything all other speaker stands aspire to be. They're incredibly strong, extraordinarily sturdy, lightweight, 100% field serviceable, AND raise and lower speaker stands on their own! Driven by innovation and years of research and development, the Air-Powered Series feature an internal shock that lifts speakers weighing 50 lbs and less with no effort, and requires just one hand's worth of effort to raise speakers weighing more than 50 lbs!Raise and Lower the Speaker with Ease!
The TS-100 is the easiest speaker stand to use thanks to the internal air-powered shock that literally raises the speaker for you. The stand's internal shock easily raises speakers weighing 50 lbs and less with no effort from the user (the Mackie SRM Series, JBL EON Series, and QSC K Series all weigh far less than 50 lbs, for instance). And, the TS-100 requires very little effort from the end user to raise speakers weighing more than 50 lbs. When you're ready to lower the speaker, we've provided a convenient and ergonomic hand grip from which you can lower the speaker - with just one hand. There's never been an easier, more convenient, or safer way to set up and tear down speakers.

Patented Tripod Design, Over-sized Heavy Wall Aluminum Tubing The TS-100's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs. The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-100 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight. 100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-100 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-100, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!
Part Name: TS-100B
Part Number: 16759
Height: 3' 8" - 6' 7" (1118 mm - 2007 mm)
Weight: 12.1 lbs. (5.5 kg)
Base Diameter: 47" (1194 mm)
Telescoping Tube Diameter: 1.5" (38 mm)
Adapter Diameter: 1.375" (35 mm)
Load Capacity: 150 lbs. (68.2 kg)
Folded: 43.5" x 5.5" (1105 mm x 140 mm)