| | | Zoom TAC-2 Thunderbolt Recording Interface with 2x JBL LSR305 Active Studio Monitors and Audio-Techn | | This is a no hassle BUY IT NOW listing for your convenience with FREE EXPEDITED SHIPPING in the continental United States!
A complete recording package. Thunderbolt ready recording interface, a pair of versatile studio monitors, one of Audio Technica's most popular studio mics, and all the cables you need to connect them all together. Save yourself the headache, get it all in one shot right here! | | | | (2 PACK)
Brand New JBL LSR305 with Full Factory Warranty5" Two-Way Powered Studio MonitorRetail Price: $398.00Each Item in Pack Includes:
(1) JBL LSR305 5" Active Studio Monitor
(1) US Power Cord
(1) Operator's Instructions | | | Click on an image to open in new window |
| | | Description | | Bi-amplified Studio Monitor with Magnetically-Shielded 5” Low Frequency Transducer and 1” Soft-Dome High Frequency Transducer and Image Control Wave Guide. Class-D 41 Watt RMS Amplifier for LF, and 41 Watt RMS Amplifier for HF. Balanced XLR and ¼” TRS Inputs with Detented Level Control, HF and LF Trim Controls. | | | Features: | Specifications: | | Image Control Waveguide: The Image Control Waveguide was developed for JBL’s new flagship M2 Master Reference Monitor and with the introduction of the JBL 3 Series, is now included for the first time in an affordable, compact reference monitor. The patent-pending design of the Image Control Waveguide precisely controls the sound emanating from the speaker in the vertical and horizontal planes ensuring the presentation at the listening position is neutral and accurate.JBL Transducers are legendary for their performance. The 3 Series long-throw woofer and its damped woven composite Neodymium tweeter are designed from the ground up to reproduce the powerful transients and micro dynamics of your mix. These drivers deliver impressive deep bass and smooth high frequency response beyond the range of human hearing.JBL’s Patented Slip Stream™ low frequency port design works in concert with the woofer to produce deep bass response at all playback levels. The double-flared shape of the port is precisely engineered for greater low-frequency extension and reduced turbulence.Big Power, Big Sound - 3 Series efficient Class D Amplifiers provide abundant power to deliver the output and dynamic headroom needed for the most demanding production stylesProfessional Balanced Inputs - Balanced XLR and 6 mm TRS inputs give you the options you need to connect your 3 Series to any signal source while maintaining professional signal quality.Selectable Input Sensitivity - The -10 dB/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the 3 Series to high output professional gear without any danger of input overload.LF Trim and HF Trim “TRIM” switches for both the Low and High Frequencies give you excellent control over the 3 Series sound in “your” room. Use these to fine-tune the amount of bass and treble you hear to compensate for room acoustics, program material and your personal taste.JBL Professional Reliability - Prior to becoming a production-ready design, each 3 Series model is subjected to JBL’s tough 100 hour power test, in which the speaker is required to play continually at full output for 100 hours without failure. This demanding test ensures your 3 Series speakers will deliver years of reliable performance.JBL LSR Design - Your Music Needs a Point of Reference - While most manufacturers take only a single on axis measurement of the speaker’s performance, this doesn’t tell how it will sound in your room. JBL’s LSR Linear Spatial Reference design criteria requires seventy-two measurements yielding more than 1,200 times more data, enabling JBL to engineer a speaker that “sounds right” in any working space. With LSR design, 3 Series Studio Monitors deliver superior accuracy regardless of the size and shape of your room, so your mixes “hit their mark” when heard on any playback system.Deep Pedigree - The impressive performance of the 3 Series Reference Monitors is the result of JBL’s development of its flagship M2 Master Reference Monitor | Frequency Range: 43 Hz-24 kHzMax Peak SPL: 108 dB SPL C-WeightedMax Peak Input: +23 dBuLF Driver Size: 127 mm (5")HF Driver Size: 25 mm (1")LF Driver Power Amp: 41 W Class DHF Driver Power Amp: 41 W Class DLF Trim Control: +2 dB, 0, -2 dBHF Trim Control: +2 dB, 0, -2 dBInput Types: 1 x XLR, 1 x TRS BalancedAC Input Voltage: 100-240 VAC +/- 10% 50/60 HzDimensions (H x W x D): 298 mm x 185 mm x 251 mm (11.75 in x 7.28 in x 9.88 in)Weight: 4.6 kg (10.12 lbs) | |
| | Brand New Zoom TAC-2 with Full Factory Warranty2-Channel Thunderbolt Audio ConverterRetail Price: $389.99Includes:
(1) Zoom TAC-2 Thunderbold Audio Converter
(1) Thunderbolt Cable
(1) Operator's Instructions | | | Click on an image to open in new window |
| | | Description | | In today's world, speed is everything. The blazingly fast Zoom TAC-2 interface uses the latest Thunderbolt technology for ultra-low latency and the ultimate in high-quality audio, up to 24-bit/192kHz. Lightweight and portable, yet rugged enough for the road, the TAC-2 is also easy to use, with a single large rotary knob controlling all parameters. Whether using it in your home studio or on the road, you can rely on your TAC-2 to deliver pristine audio. | | | Features: | Specifications: | | 2-in/2-out high speed Thunderbolt audio interface Support for recording and playback up to 24-bit/192kHz Ultra-low latency audio streamingTwo combo balanced XLR/TRS input connectors+48V phantom power for each inputHi-Z input jack allows direct connection of electric guitar or bassTwo balanced TRS output jacks for connection to amplifiers or self-powered speakersDedicated headphone jack with independent level control7-position LED metering for input, output and headphone volumeHigh-performance Burr Brown mic preamps with up to +60dB of amplification4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelityAsynchronous transfer system unaffected by computer jitterSimple user interface--all operations controlled by a single rotary knobBus powered--no AC power requiredRugged yet compact and lightweightWorks with all Thunderbolt-equipped Macintosh computers running OS X 10.6.8 or later | Input 1 / 2 connectors: XLR/TRS combo jacks (XLR: 2 hot / TRS: TIP hot)Input gain: 0, 9 to 60 dB (3dB step)Input impedance: 3 kOhmsMaximum input level: +12 dBu (@0dBFs)Phantom power: +48VHi-Z (INPUT1) connector: 1/4" phone jackInput impedance: 1 MOhmMaximum input level: +10 dBu (@0dBFs)Output L/R connector: 1/4" TRS phone jack (Balanced)Maximum output level: +15 dBu (@0dBFs)Output impedance: 100 OhmsPHONES Connector: 1/4" Stereo phone jack, 20mW + 20mW (into 32 Ohms load)Phones Maximum output level: +10 dBu (@0dBFs)Phones Output impedance: 30 OhmsAD/DA CONVERSION Type: 4x upsamplingChipset: Burr Brown PCM4202 (A/D), AKM AK4396 (D/A)Frequency response: -2.0 dB: 20 Hz - 50 kHz @ 192kHz setting, -1.0 dB: 20 Hz - 34 kHz @ 96kHz setting, -0.4 dB: 20 Hz - 20 kHz @ 44.1kHz settingDynamic range: A/D: 118dB typical (IHF-A), D/A: 120dB typical (IHF-A)S/N ratio EIN: 125dB(IHF-A) @ 60dB, 150 Ohm inputAudio channels recording: 2Audio channels playback: 2Sampling frequency: 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHzBit depth: 24-bitInterface: ThunderboltPower: Thunderbolt Bus PowerDimensions: 129.5mm(D) x 120.0mm(W) x 51.3mm (H)Weight: 420g | |
| | Brand New Audio-Technica AT2050 with Full Factory WarrantyMulti Pattern Studio Condenser MicrophoneRetail Price: $369.00Includes:
(1) AT2050 Microphone
(1) AT8458 shock mount for 5/8"-27 threaded stands
(1) 5/8"-27 to 3/8"-16 threaded adapter
(1) Soft protective case |
| | | Description | | The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. | | | Features: | Specifications: | | Three switchable polar patterns: omni, cardioid, figure-of-eightSwitchable 80 Hz high-pass filter and 10 dB padLarge diaphragm for smooth, natural sound and low noiseState-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standardsIncludes shock mount & protective pouch | ELEMENT: Externally-polarized (DC bias) condenserPOLAR PATTERNS: Cardioid, Omnidirectional, Figure-of-EightFREQUENCY RESPONSE: 20-20,000 HzLOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octaveOPEN CIRCUIT SENSITIVITY: –42 dB (7.9 mV) re 1V at 1 PaIMPEDANCE: 120 ohmsMAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)NOISE: 17 dB SPLDYNAMIC RANGE (TYPICAL): 132 dB, 1 kHz at Max SPLSIGNAL-TO-NOISE RATIO: 77 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS: 11-52V DC, 4.7 mA typicalSWITCHES: Polar selection; Flat, roll-off; 10 dB pad (nominal)WEIGHT: 412 g (14.5 oz)DIMENSIONS: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameterOUTPUT CONNECTORS: Integral 3-pin XLRM-typeACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAUDIO-TECHNICA CASE STYLE: R5 | |
| | Brand New Hosa CSS-204 with Full Factory Warranty13.2' 1/4" TRS - 1/4" TRS Patch CableRetail Price: $18.60Includes:
(1) 13.2' 1/4" TRS - 1/4" TRS Patch Cable |
| | | Description | | Dual 1/4" TRS to Dual 1/4" TRS standard stereo patch cable, 4M in length. | | | Features: | Specifications: | | Use to interconnect gear with left and right stereo balanced phone jacksFeatures molded housings and heavy-duty strain reliefA cost-effective solution for light- and medium-duty applications | Length: 4M (13.2')Conductor: 26 AWG x 2 OFCShield: OFC SpiralConnectors: Hosa Molded | |
| | Brand New Hosa MBL-110 with Full Factory WarrantyStandard Microphone CableRetail Price: $13.65Includes:
(1) Hosa 10' Standard Mic Cable |
| | | Description | | Standard 10 ft. Microphone Cable. | | | Features: | Specifications: | | Use to connect mics to mic preamps and mixing consolesBlack connectors disappear on stageA cost-effective solution for light- and medium-duty applications | Length: 10 ft.Conductor: 22 AWG X 2Shield: OFC BraidConnectors: Hosa Pro Black | |
| | | Return Policy:
We want you to be completely satisfied with your purchase from FP Logistics on eBay. Most unused merchandise in re-sellable condition with all original packaging and accessories may be returned for a refund within 30 days of purchase. In the event that you want to return your purchase to FP Logistics, please use the "Return this item" button from your eBay order history.Re-stocking Fees and Shipping Charges
All returns are subject to a re-stocking fee. Any shipping and handling charges are non-refundable.Partial Returns
To be eligible for a refund, all of the items included with the purchase must be returned. In the case of an incomplete return, no refund will be given. Non-Returnable Items
There are a few item types that are not eligible for return. Please refer to this specific product's return policy in the "Shipping and Payments" tab for full details. |
| 