Back to the main page Back to category Microphones and Wireless Systems
musical instrument details
Audio Ltd RMS 2040 Diversity Wireless Receiver Transmitter + DPA 4060 Microphone
Estimated price for orientation: 1 199 $
Category: Microphones and Wireless Systems
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: audio ltd
This auction is for Audio Limited full set together with DPA4060 lavaliere microphone.Operating frequencies: 838.150 MHz-861.750 MHzBoth transmitter and receiver are in overall good cosmetic conditions and perform perfectly.I have tested these units before listing here and the sound and the range is great!For the reason Audio Ltd considered one of the best (if not the best) professional radio systems.I personally prefer their sound over Lectrosonics digital systems. From my experience Audio Ltd sounds more open less colourated and have a better range.Also included: 1. Used DPA 4060 mic.2. The Lemo 6 pin to XLR output cable3. Antennas x 3.The transmitter operates on a single 9V battery and the receiver on 2 x 1.5V AA BatteriesFree shipping worldwide! | | Unique infrared interfaceThe new TX2040 transmitter features Audio’s unique infrared interface,which allows the transmitter to be controlled remotely. The sound professional can use the Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing – great for film and drama. The device displays the frequency on which the TX2040 is operating, enabling the sound engineer to identify the particular transmitter, even when it can’t be seen. The remote control features can also be operated by the SwitchiR control system, or from a Palm PDA, using free downloadable Palm AudiR software.Compact designThe absence of mechanical switches on the TX2040 reduces wear, and ensures a greater degree of water proofing, for improved durability and reliability. The battery compartment is integrated into the transmitter case, to prevent the battery coming a drift in use, and has been designed to accommodate larger 9V batteries. The TX2040 will often last for a full day without the need to replace the batteries.32 pre-programmed frequenciesThe unit has 32 pre-programmed frequencies, with a switching bandwidth of up to 24MHz, which is the equivalent of three European TV channels, or four US channels. Despite its host of new features, the transmitter remains the same size as its predecessor the TX2020, and is fully backward compatible with earlier Audio systems. As with all our products, RF and audio performance are excellent.Designed for comfortThe TX2040 is compact, sleek and stylish, with rounded edges to make it more comfortable for the artist to wear.TX2040 specificationsFrequency range from 470 - 1000MHz Number of frequencies 32 pre-programmed Switching range up to 24MHz System frequency response 50Hz to 18kHz ±1dB Output power 50mW nominal System THD measured at 1KHz <0.1% at working levels.
<0.3% at gain position 9 with ?6dB input in overload? Gain control range 28dB in 8 steps plus 2 steps for 600Ω line input Maximum input level +8dBm gain position 0, 600Ω Indicators Red LED for ON condition. LED turns off to indicate overload Battery required 9V (IEC 6LR61) type Alkaline Battery life Typically >6 hours on an alkaline 9V battery Size 89 (h) x 60 (w) x 21 (d) mm Weight 135g Operating temperature range -20°C to +55°C Compliant to EN 300 422 EN 300 445 (CE), FCC. | | Up to 24Mhz switchable bandwidthThe DX2040 has 32 pre-programmed frequencies and incorporates enhanced multi-channel operation with a switching bandwidth of up to 24MHz (that’s equivalent to 3 European or 4 U.S. TV channels).Internal or external power optionsThe receiver can be powered for up to 5 (standard) or 10 (lithium) hours by 2xAA 1.5v batteries, available anywhere in the world. Alternatively it can be externally powered (with a supply range from 6-18v DC) using cables available from Audio.Infrared remote controlAudio’s unique infrared interface allows the user to set all parameters via the SwitchiR, a keyfob-sized remote control unit.AudiR for PalmScanning with signal strength on location is possible through AudiR for Palm (available free). This featu
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | audio ltd |
This auction is for Audio Limited full set together with DPA4060 lavaliere microphone.Operating frequencies: 838.150 MHz-861.750 MHzBoth transmitter and receiver are in overall good cosmetic conditions and perform perfectly.I have tested these units before listing here and the sound and the range is great!For the reason Audio Ltd considered one of the best (if not the best) professional radio systems.I personally prefer their sound over Lectrosonics digital systems. From my experience Audio Ltd sounds more open less colourated and have a better range.Also included: 1. Used DPA 4060 mic.2. The Lemo 6 pin to XLR output cable3. Antennas x 3.The transmitter operates on a single 9V battery and the receiver on 2 x 1.5V AA BatteriesFree shipping worldwide!
| | Unique infrared interfaceThe new TX2040 transmitter features Audio’s unique infrared interface,which allows the transmitter to be controlled remotely. The sound professional can use the Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing – great for film and drama. The device displays the frequency on which the TX2040 is operating, enabling the sound engineer to identify the particular transmitter, even when it can’t be seen. The remote control features can also be operated by the SwitchiR control system, or from a Palm PDA, using free downloadable Palm AudiR software.Compact designThe absence of mechanical switches on the TX2040 reduces wear, and ensures a greater degree of water proofing, for improved durability and reliability. The battery compartment is integrated into the transmitter case, to prevent the battery coming a drift in use, and has been designed to accommodate larger 9V batteries. The TX2040 will often last for a full day without the need to replace the batteries.32 pre-programmed frequenciesThe unit has 32 pre-programmed frequencies, with a switching bandwidth of up to 24MHz, which is the equivalent of three European TV channels, or four US channels. Despite its host of new features, the transmitter remains the same size as its predecessor the TX2020, and is fully backward compatible with earlier Audio systems. As with all our products, RF and audio performance are excellent.Designed for comfortThe TX2040 is compact, sleek and stylish, with rounded edges to make it more comfortable for the artist to wear.TX2040 specifications
| Frequency range | from 470 - 1000MHz |
| Number of frequencies | 32 pre-programmed |
| Switching range | up to 24MHz |
| System frequency response | 50Hz to 18kHz ±1dB |
| Output power | 50mW nominal |
| System THD measured at 1KHz | <0.1% at working levels. <0.3% at gain position 9 with ?6dB input in overload? |
| Gain control range | 28dB in 8 steps plus 2 steps for 600Ω line input |
| Maximum input level | +8dBm gain position 0, 600Ω |
| Indicators | Red LED for ON condition. LED turns off to indicate overload |
| Battery required | 9V (IEC 6LR61) type Alkaline |
| Battery life | Typically >6 hours on an alkaline 9V battery |
| Size | 89 (h) x 60 (w) x 21 (d) mm |
| Weight | 135g |
| Operating temperature range | -20°C to +55°C |
| Compliant to | EN 300 422 EN 300 445 (CE), FCC. | | Up to 24Mhz switchable bandwidthThe DX2040 has 32 pre-programmed frequencies and incorporates enhanced multi-channel operation with a switching bandwidth of up to 24MHz (that’s equivalent to 3 European or 4 U.S. TV channels).Internal or external power optionsThe receiver can be powered for up to 5 (standard) or 10 (lithium) hours by 2xAA 1.5v batteries, available anywhere in the world. Alternatively it can be externally powered (with a supply range from 6-18v DC) using cables available from Audio.Infrared remote controlAudio’s unique infrared interface allows the user to set all parameters via the SwitchiR, a keyfob-sized remote control unit.AudiR for PalmScanning with signal strength on location is possible through AudiR for Palm (available free). This featu
|