The VRX932LAP is a powered, light- weight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital. The Constant Curvature waveguide mounts three compression drivers on a continuous arc. When additional VRX932LAP speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide. Since there are three drivers in each VRX932LAP, the combined power handling and acoustic output of the system is far greater than a single driver could achieve. FeaturesBuilt-in JBL DrivePack DPC-2 amplifier module designed by Crown provides 1750 Watts of peak power. DSP-based resident input module provides system optimization and EQ. _ JBL’s exclusive neodymium magnet Differential Drive ® woofer for high-power capacity and light-weight. _ VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design. _ Constant Curvature waveguide for unprecedented array coherence. _ Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility. _ Array Configuration Selector permits “array shadingSpecificationsFrequency Range (-10 dB): 57 Hz - 20 kHz Frequency Response (±3 dB): 75 Hz - 20 kHz Coverage Pattern: 100° x 15° nominal Maximum Peak Output 1 : 136 dB SPL at 1m LF Driver: 1 x JBL 2262FF 305 mm (12 in) dual voice coil Differential Drive ® woofer with neodymium-magnet HF Driver: 3 x JBL 2408J, 38 mm (1.5 in) voice coil neodymium compression driver Bandpass Nominal Impedance: LF: 2 x 2 ohms HF: 4 ohms DPC-2 Internal Amplification Output (at nominal load): 1750 Watts Peak, 875 Watts Continuous DPC-2 Output as (Continuous IEC shaped pink noise into rated load impedance): LF: 750 Watts, HF: 125 Watts DPC-2 Output Section: LF: Dual-Bridged Technology™, Class D HF: Bridged Class D Audio Input Connector: XLR with loop through User Controls: Input Attenuator (0-16 dB) ACS (Array Configuration Selector), HF level adjustment (+3 dB, 0 dB, -3dB) Signal Processing: DSP based, resident in Input Module System Management: DSP based limiters for mechanical and thermal protection. AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz AC Line Voltage: User selectable: 120V/240V (-15%, +10%) AC Input Connector: Neutrik PowerCon (NAC 3MPA) AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB) AC Current Requirements: 6A per system at 120V, 3A per system at 240V Enclosure: 25/15 mm birch plywood. Suspension / Mounting: Optional VRX-AF line-array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting Finish: Black DuraFlex™ finish Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam Dimensions (H x W x D): 349 mm x 597 mm x 444 mm (13.75 in x 23.5 in x 17.5 in) Net Weight: 24 kg (52 lb)