Back to the main page Back to category Preamps and Channel Strips
musical instrument details
Presonus Eureka Mono Preamp Comp EQ
Estimated price for orientation: 468 $
Category: Preamps and Channel Strips
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: PreSonus MPN: Does Not Apply EAN: 673454000478
The name “Eureka” derives from a Greek word meaning “I have found it!” It was made famous by the ancient Greek scholar Archimedes, indicating exultation at a great discovery. Try the sweet-sounding, super-versatile Eureka preamp and signal processor, and you’ll discover the answer to a variety of sonic needs.One of our best-selling products, the Eureka is equally at home in the studio or at the gig. With separate mic, line, and instrument inputs, you can employ it on almost any sound source.Sweetening starts with a high-headroom Class A solid-state mic preamplifier with +22 dBu of headroom, providing wide dynamic range and excellent transient-response characteristics.The Eureka’s versatility stems in part from its malleable signal flow. With both XLR and ¼” line outputs, you can connect the Eureka to almost any recording interface, amp, or P.A. system. The EQ can be pre- or post-compressor, and you can bypass each independently. Balanced send and return jacks enable you to insert your favorite outboard processor before the compressor and EQ.The backlit VU meter can display gain reduction or output gain.Technical SpecificationsInput Channels 1 Dynamic Range >115 dB Headroom +22 dB Frequency Response 10 Hz to 50 kHz
Microphone Preamp Input Impedance, XLR Input 1.3 kΩ Input Impedance, Line Level Input 10 kΩ Connectors Neutrik™ Combo Gain +12 dB to +52 dB Noise Floor -112 dBu (+12 dB gain) EIN -127 dB THD + Noise (0% saturation) <0.005% THD + Noise (full saturation) <0.5% Microphone Input Connector XLR Microphone Input Impedance (selectable) 50Ω, 150Ω, 600Ω, 1.5 kΩ, or 2.5 kΩ Instrument Input Connector ¼” TS Instrument Input Impedance 1 MΩ Send Connector ¼” TRS balanced/unbalanced Send Output Impedance 51Ω Return Connector ¼” TRS balanced/unbalanced Return Input Impedance 10 kΩ Metering (3-LED) -20 dBu, 0 dBu, Clip Line Input (switchable) ¼” TRS, 10 kΩ input impedance Phantom Power (switchable) +48V Pad (switchable) 0 dB/-20 dB Phase (switchable) 0, 180 degrees High-pass filter (switchable) -3 dB shelf at 80 Hz
Compressor Threshold (variable) -40 dBu to +20 dBu Ratio (variable) 1-10 (1:1 to 7:1) Attack (variable) 0.1 to 200 ms Release (variable) 0.05 ms to 3 seconds Makeup Gain -20 dB to +20 dB High-pass Sidechain Filter (variable) 10 Hz to 10 kHz Metering Analog VU (gain reduction / Output Level)
Equalizer Low Band (±13 dB) 20 Hz to 300 Hz Mid Band (±13 dB) 200 Hz to 3 kHz High Band (±13 dB) 2 kHz to 20 kHz Q (variable all bands) Q=0.4 to 2 (3 octave to 2/3 octave)
Master Output Fader -70 dB to +10 dB Output Connectors XLR balanced and ¼” TRS balanced/unbalanced Output Impedance 51Ω Output-level Meter Analog VU (-20 dBu to +6 dBu) Gain-reduction Meter Analog VU (-20 dB to 0 dB) Output Headroom +22 dBu
Power Internal supply, standard IEC connector 100 VAC to 120 VAC, 200 VAC to 240 VAC
Physical Dimensions 1U rackmount Height 1.75” (44.45 mm) Depth 7” (177.8 mm) Width 19” (482.6 mm) Weight 8 lbs. (3
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | PreSonus |
| MPN: | Does Not Apply | EAN: | 673454000478 |
The name “Eureka” derives from a Greek word meaning “I have found it!” It was made famous by the ancient Greek scholar Archimedes, indicating exultation at a great discovery. Try the sweet-sounding, super-versatile Eureka preamp and signal processor, and you’ll discover the answer to a variety of sonic needs.One of our best-selling products, the Eureka is equally at home in the studio or at the gig. With separate mic, line, and instrument inputs, you can employ it on almost any sound source.Sweetening starts with a high-headroom Class A solid-state mic preamplifier with +22 dBu of headroom, providing wide dynamic range and excellent transient-response characteristics.The Eureka’s versatility stems in part from its malleable signal flow. With both XLR and ¼” line outputs, you can connect the Eureka to almost any recording interface, amp, or P.A. system. The EQ can be pre- or post-compressor, and you can bypass each independently. Balanced send and return jacks enable you to insert your favorite outboard processor before the compressor and EQ.The backlit VU meter can display gain reduction or output gain.Technical Specifications
| Input Channels | 1 |
| Dynamic Range | >115 dB |
| Headroom | +22 dB |
| Frequency Response | 10 Hz to 50 kHz |
| Microphone Preamp | |
|---|---|
| Input Impedance, XLR Input | 1.3 kΩ |
| Input Impedance, Line Level Input | 10 kΩ |
| Connectors | Neutrik™ Combo |
| Gain | +12 dB to +52 dB |
| Noise Floor | -112 dBu (+12 dB gain) |
| EIN | -127 dB |
| THD + Noise (0% saturation) | <0.005% |
| THD + Noise (full saturation) | <0.5% |
| Microphone Input Connector | XLR |
| Microphone Input Impedance (selectable) | 50Ω, 150Ω, 600Ω, 1.5 kΩ, or 2.5 kΩ |
| Instrument Input Connector | ¼” TS |
| Instrument Input Impedance | 1 MΩ |
| Send Connector | ¼” TRS balanced/unbalanced |
| Send Output Impedance | 51Ω |
| Return Connector | ¼” TRS balanced/unbalanced |
| Return Input Impedance | 10 kΩ |
| Metering (3-LED) | -20 dBu, 0 dBu, Clip |
| Line Input (switchable) | ¼” TRS, 10 kΩ input impedance |
| Phantom Power (switchable) | +48V |
| Pad (switchable) | 0 dB/-20 dB |
| Phase (switchable) | 0, 180 degrees |
| High-pass filter (switchable) | -3 dB shelf at 80 Hz |
| Compressor | |
|---|---|
| Threshold (variable) | -40 dBu to +20 dBu |
| Ratio (variable) | 1-10 (1:1 to 7:1) |
| Attack (variable) | 0.1 to 200 ms |
| Release (variable) | 0.05 ms to 3 seconds |
| Makeup Gain | -20 dB to +20 dB |
| High-pass Sidechain Filter (variable) | 10 Hz to 10 kHz |
| Metering | Analog VU (gain reduction / Output Level) |
| Equalizer | |
|---|---|
| Low Band (±13 dB) | 20 Hz to 300 Hz |
| Mid Band (±13 dB) | 200 Hz to 3 kHz |
| High Band (±13 dB) | 2 kHz to 20 kHz |
| Q (variable all bands) | Q=0.4 to 2 (3 octave to 2/3 octave) |
| Master | |
|---|---|
| Output Fader | -70 dB to +10 dB |
| Output Connectors | XLR balanced and ¼” TRS balanced/unbalanced |
| Output Impedance | 51Ω |
| Output-level Meter | Analog VU (-20 dBu to +6 dBu) |
| Gain-reduction Meter | Analog VU (-20 dB to 0 dB) |
| Output Headroom | +22 dBu |
| Power | |
|---|---|
| Internal supply, standard IEC connector | 100 VAC to 120 VAC, 200 VAC to 240 VAC |
| Physical | |
|---|---|
| Dimensions | 1U rackmount |
| Height | 1.75” (44.45 mm) |
| Depth | 7” (177.8 mm) |
| Width | 19” (482.6 mm) |
| Weight | 8 lbs. (3
|