| B-Stock - with Full Manufacturer's Warranty!IN STOCK! Red 1 500 offers a compact interface to digital recording systems or for location recordings as well as convenient access in any control room, with a Lundahl LL1538 input transformer, just as in the original; switchable phantom power; polarity invert; and an illuminated classic porthole VU meter. The output stage of Red 1 500, with its custom Carnhill transformer, will easily drive long cable runs without loss of quality – ideal for remote recordings. Mic gain is switched (with a Grayhill gold-plated military-grade switch) in 6dB steps from -6 to +60dB, for accurate, precise channel matching and recall.The unique Focusrite mic amp topology provides superb common mode rejection, excellent overload margin and, with its shared gain structure, (14dB from the transformer and up to 46dB from the amplifier) a very low noise floor, combined with the traditional wide bandwidth of the original Red series (10Hz to 140kHz). This exceptional level of performance is maintained over a wide range of impedances applied to the input, making the Red 1 500 suitable for almost any microphone – ribbon, dynamic or condenser. Red 1 500 Series Mic Pre – Focusrite’s signature sound in an exciting, popular new form factor.Specifications Maximum Output +25.5dBu (20Hz–20kHz) Maximum Input >+28dBu (200Hz–13kHz), >26dBu (160Hz–20kHz) Mic Preamp Input Impedance >1.1kΩ (Nominal) Frequency Response Deviation at 30dB gain (20Hz–20kHz) ±0.1dB Bandwidth (–3dB) at 30dB gain 103 kHz Range at 60dB gain (–0.5dB) 125Hz–24kHz Bandwidth (–3dB) at 60dB gain 32Hz–75kHz Output Noise (min gain) –104.5dBu CCIR-RMS –107dBu A-wgt EIN (max gain, 150 Ohm) –124.5dBu CCIR-RMS –128dBu A-wgt Harmonic Distortion (30dB gain, –30dBu input) Third Harmonic –101dB (0.0009%) Second Harmonic –88.5dB (0.0038%) THD+N (20 kHz bandwidth) –88dB (0.0039%) CMRR (24dB gain, –4dBu input, 1kHz) Common mode test: 102dB IEC 60268-3:2000 test: 89dB | Buyer Terms | | If you have ZERO FEEDBACK, any deserved NEGATIVE FEEDBACK, or a history of bid retraction you MUST receive our permission before bidding or your
|
|
|