Back to the main page Back to category Microphones and Wireless Systems
musical instrument details
Lectrosonics UCR411A + UM400a Wireless Microphone System - Block 24 (Yellow)
Estimated price for orientation: 1 575 $
Category: Microphones and Wireless Systems
Class:
Description Brand: Lectrosonics Features: Adjustable Gain, Auto-Lock Function, Back-Lit LCD Display, Bodypack Transmitter Type: Wireless Bundled Items: Body Transmitter Model: UCR 411a / UM400a To Fit: Wireless Systems Connectivity: Wired XLR Country/Region of Manufacture: United States Connector(s): XLR 3 Pin Microphone Form Factor: 8185663004 Wireless Technology: UHF
Both units recently inspected and serviced to Lectrosonics specifications. (see attached photos-may not be exact units due to the quantity being sold). Just walked tested and performed to factory specs. Purchase Includes: 1 - UM400a Digital Hybrid Wireless® Compact Transmitter 1 - Antenna - Cut for block (Part #AMMXX) 1 - Adjustment Tool 1 - UCR411a Digital Hybrid Wireless® Compact Receiver 2 - Antenna (Part #A8UXX) 1 - Power Supply/AC Adapter (Part #CH12) 256 synthesized UHF frequencies 100 mW output power DSP controlled dual envelope input limiter DSP emulations for analog compatibility Servo bias input preamp DSP based pilot-tone signal Circulator/Isolator output stage Adjustable low frequency roll-off The UM400a implements the latest Digital Hybrid Wireless® technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio. Input levels are accurately indicated by two LEDs on the control panel.The innovative servo bias input on the standard 5-pin connector provides a programmable, regulated voltage to accommodate a wide variety of electret microphones. This is a used item in good condition which meets factory specs with professional engraving – “sold as is” not for use in North America*. 256 synthesized UHF frequencies 100 mW output power DSP controlled dual envelope input limiter DSP emulations for analog compatibility Servo bias input preamp DSP based pilot-tone signal Circulator/Isolator output stage Adjustable low frequency roll-off The UM400a implements the latest Digital Hybrid Wireless® technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio. Input levels are accurately indicated by two LEDs on the control panel. The innovative servo bias input on the standard 5-pin connector provides a programmable, regulated voltage to accommodate a wide variety of electret microphones. This is a used item in good condition which meets factory specs with professional engraving – “sold as is”. UCR411a Digital Hybrid Wireless® Compact Receiver Block 24 (Yellow 614.400 - 639.900 MHz) Digital Hybrid Wireless® (U.S. Patent #7,225,135) SmartSquelch™ SmartDiversity™ 256 selectable UHF frequencies Auto-tracking front-end filters DSP-based pilot tone Graphics type backlit LCD display Balanced XLR audio output Internal batteries or external DC powering options Compatibility modes for use with analog transmitters The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful LCD interface, making the unit ideal for use in Quad Packs, on sound carts, in portable bags and in rack mount multi-couplers. To alleviate interference problems in an increasingly congested RF spectrum, an RF spectrum analyzer is built into the receiver. The receiver tunes across its 25.6 MHz tuning range and records RF activity with markers on the LCD screen. Finding clear operating frequencies is a quick, simple process. The UCR411A is compatible with all 400 Series Lectrosonics wireless transmitters (and so
Description
| Brand: | Lectrosonics | Features: | Adjustable Gain, Auto-Lock Function, Back-Lit LCD Display, Bodypack Transmitter |
| Type: | Wireless | Bundled Items: | Body Transmitter |
| Model: | UCR 411a / UM400a | To Fit: | Wireless Systems |
| Connectivity: | Wired XLR | Country/Region of Manufacture: | United States |
| Connector(s): | XLR 3 Pin | Microphone Form Factor: | 8185663004 |
| Wireless Technology: | UHF |
Both units recently inspected and serviced to Lectrosonics specifications. (see attached photos-may not be exact units due to the quantity being sold). Just walked tested and performed to factory specs. Purchase Includes: 1 - UM400a Digital Hybrid Wireless® Compact Transmitter 1 - Antenna - Cut for block (Part #AMMXX) 1 - Adjustment Tool 1 - UCR411a Digital Hybrid Wireless® Compact Receiver 2 - Antenna (Part #A8UXX) 1 - Power Supply/AC Adapter (Part #CH12) 256 synthesized UHF frequencies 100 mW output power DSP controlled dual envelope input limiter DSP emulations for analog compatibility Servo bias input preamp DSP based pilot-tone signal Circulator/Isolator output stage Adjustable low frequency roll-off The UM400a implements the latest Digital Hybrid Wireless® technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio. Input levels are accurately indicated by two LEDs on the control panel.The innovative servo bias input on the standard 5-pin connector provides a programmable, regulated voltage to accommodate a wide variety of electret microphones. This is a used item in good condition which meets factory specs with professional engraving – “sold as is” not for use in North America*. 256 synthesized UHF frequencies 100 mW output power DSP controlled dual envelope input limiter DSP emulations for analog compatibility Servo bias input preamp DSP based pilot-tone signal Circulator/Isolator output stage Adjustable low frequency roll-off The UM400a implements the latest Digital Hybrid Wireless® technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio. Input levels are accurately indicated by two LEDs on the control panel. The innovative servo bias input on the standard 5-pin connector provides a programmable, regulated voltage to accommodate a wide variety of electret microphones. This is a used item in good condition which meets factory specs with professional engraving – “sold as is”. UCR411a Digital Hybrid Wireless® Compact Receiver Block 24 (Yellow 614.400 - 639.900 MHz) Digital Hybrid Wireless® (U.S. Patent #7,225,135) SmartSquelch™ SmartDiversity™ 256 selectable UHF frequencies Auto-tracking front-end filters DSP-based pilot tone Graphics type backlit LCD display Balanced XLR audio output Internal batteries or external DC powering options Compatibility modes for use with analog transmitters The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful LCD interface, making the unit ideal for use in Quad Packs, on sound carts, in portable bags and in rack mount multi-couplers. To alleviate interference problems in an increasingly congested RF spectrum, an RF spectrum analyzer is built into the receiver. The receiver tunes across its 25.6 MHz tuning range and records RF activity with markers on the LCD screen. Finding clear operating frequencies is a quick, simple process. The UCR411A is compatible with all 400 Series Lectrosonics wireless transmitters (and so