Back to the main page Back to category JBL PRX710 10Inc
musical instrument details
JBL PRX710 10 in 2 Way Powered PA Speaker 1500W
Estimated price for orientation: 649 $
Category: JBL PRX710 10Inc
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: JBL Active/Passive: Active Type: PA Speaker Features: 2-Way Configuration Model: PRX710 RMS Power: 1500W MPN: PRX710 UPC: 050036904414
Powered by Frooition Pro JBL PRX710 10 in 2 Way Powered PA Speaker 1500W Item Description JBL PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement System The PRX710 is the next step in the highly successful PRX Series and introduces the first use of JBL’s patented Differential Drive Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX710 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom to efficiently deliver smooth high frequencies and rich, deep bass response even at very high sound power levels. Compact, ultra-lightweight, the PRX710 uses JBL’s tour tested technology throughout so you can trust it to deliver a lifetime of reliable performance.
Features: 133 dB peak SPL 10" Differential Drive® low-frequency driver for low-distortion and higher SPL 1.5" diameter next generation JBL neodymium compression driver JBL designed waveguide for accurate coverage Efficient Class-D amplifier technology Normal and Boost user selectable EQ presets DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ Line level and direct microphone input capability Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through Integrated 36 mm pole mount socket Integrated handle with injection molded backing cup for easy transport Integrated M10 suspension points for easy setup Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish. Cloth backed, dent-resistant 16 gauge steel grilles
Specifications: Power Rating: 1500 W Frequency Range (-10 dB): Normal: 50 Hz – 19.6kHz Boost: 42.9 Hz – 20kHz Frequency Response (±3 dB): Normal: 63.5 Hz – 18.5kHz Boost: 53 Hz – 18.6kHz Coverage Pattern: 100° x 60° nominal Directivity Index (DI): 9 dB Directivity Factor (Q): Crossover Frequency: 1.9 kHz Maximum SPL: 133 dB Signal Indicators: Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting, Signal: Green LED indicates signal present, Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio. Dynamic Control (Input): dbx Type IV™ limiter circuit Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced) LF Driver: 1 x JBL M110-4 250mm (10 in) woofer HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver Enclosure: Trapezoidal, 18 mm, plywood Suspension / Mounting: single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point Transport: 1 x integrated handle with injection molded backing cup Finish: Obsidian DuraFlex™ finish Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input Output Connectors: 1 male XLR balanced output Dimensions (H x W x D): 498.7 mm x 335.6 mm x 322.3 mm (19.63 in x 13.21 in x 12.69 in) Net Weight: .4 kg (36 lb) SKU: 86311-B About Us ProSound And Stage Lighting (PSSL or PSSL.com as we have become to be known) has grown to one of the largest and most respected sources of professional audio and lighting equipment in the United States. We are located in Cypress, California - right down the road from Disneyland! Our goal at PSSL.com is to exceed ou
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | JBL |
| Active/Passive: | Active | Type: | PA Speaker |
| Features: | 2-Way Configuration | Model: | PRX710 |
| RMS Power: | 1500W | MPN: | PRX710 |
| UPC: | 050036904414 |
Powered by Frooition Pro
JBL PRX710 10 in 2 Way Powered PA Speaker 1500W
Item Description
JBL PRX710 10" Two-Way Multipurpose Self-Powered Sound Reinforcement System The PRX710 is the next step in the highly successful PRX Series and introduces the first use of JBL’s patented Differential Drive Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX710 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom to efficiently deliver smooth high frequencies and rich, deep bass response even at very high sound power levels. Compact, ultra-lightweight, the PRX710 uses JBL’s tour tested technology throughout so you can trust it to deliver a lifetime of reliable performance.
Features: 133 dB peak SPL 10" Differential Drive® low-frequency driver for low-distortion and higher SPL 1.5" diameter next generation JBL neodymium compression driver JBL designed waveguide for accurate coverage Efficient Class-D amplifier technology Normal and Boost user selectable EQ presets DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ Line level and direct microphone input capability Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through Integrated 36 mm pole mount socket Integrated handle with injection molded backing cup for easy transport Integrated M10 suspension points for easy setup Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish. Cloth backed, dent-resistant 16 gauge steel grilles
Specifications: Power Rating: 1500 W Frequency Range (-10 dB): Normal: 50 Hz – 19.6kHz Boost: 42.9 Hz – 20kHz Frequency Response (±3 dB): Normal: 63.5 Hz – 18.5kHz Boost: 53 Hz – 18.6kHz Coverage Pattern: 100° x 60° nominal Directivity Index (DI): 9 dB Directivity Factor (Q): Crossover Frequency: 1.9 kHz Maximum SPL: 133 dB Signal Indicators: Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting, Signal: Green LED indicates signal present, Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio. Dynamic Control (Input): dbx Type IV™ limiter circuit Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced) LF Driver: 1 x JBL M110-4 250mm (10 in) woofer HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver Enclosure: Trapezoidal, 18 mm, plywood Suspension / Mounting: single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point Transport: 1 x integrated handle with injection molded backing cup Finish: Obsidian DuraFlex™ finish Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input Output Connectors: 1 male XLR balanced output Dimensions (H x W x D): 498.7 mm x 335.6 mm x 322.3 mm (19.63 in x 13.21 in x 12.69 in) Net Weight: .4 kg (36 lb) SKU: 86311-B
Features: 133 dB peak SPL 10" Differential Drive® low-frequency driver for low-distortion and higher SPL 1.5" diameter next generation JBL neodymium compression driver JBL designed waveguide for accurate coverage Efficient Class-D amplifier technology Normal and Boost user selectable EQ presets DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ Line level and direct microphone input capability Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through Integrated 36 mm pole mount socket Integrated handle with injection molded backing cup for easy transport Integrated M10 suspension points for easy setup Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish. Cloth backed, dent-resistant 16 gauge steel grilles
Specifications: Power Rating: 1500 W Frequency Range (-10 dB): Normal: 50 Hz – 19.6kHz Boost: 42.9 Hz – 20kHz Frequency Response (±3 dB): Normal: 63.5 Hz – 18.5kHz Boost: 53 Hz – 18.6kHz Coverage Pattern: 100° x 60° nominal Directivity Index (DI): 9 dB Directivity Factor (Q): Crossover Frequency: 1.9 kHz Maximum SPL: 133 dB Signal Indicators: Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting, Signal: Green LED indicates signal present, Power/Standby : Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio. Dynamic Control (Input): dbx Type IV™ limiter circuit Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced) LF Driver: 1 x JBL M110-4 250mm (10 in) woofer HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver Enclosure: Trapezoidal, 18 mm, plywood Suspension / Mounting: single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point Transport: 1 x integrated handle with injection molded backing cup Finish: Obsidian DuraFlex™ finish Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input Output Connectors: 1 male XLR balanced output Dimensions (H x W x D): 498.7 mm x 335.6 mm x 322.3 mm (19.63 in x 13.21 in x 12.69 in) Net Weight: .4 kg (36 lb) SKU: 86311-B
About Us ProSound And Stage Lighting (PSSL or PSSL.com as we have become to be known) has grown to one of the largest and most respected sources of professional audio and lighting equipment in the United States. We are located in Cypress, California - right down the road from Disneyland! Our goal at PSSL.com is to exceed ou