Back to the main page Back to category Bose L1 Model 1s
musical instrument details
Bose L1 Model 1S Portable Line Array PA Speaker System With B2 Bass Module/Sub
Estimated price for orientation: 1 999 $
Category: Bose L1 Model 1s
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Bose MPN: N/A UPC: 017817582452
Our L1 system offering a unique combination of performance and portability for an audience of up to 300. With a 12-speaker articulated line array providing 180 degrees of clear, even, sound, the system is also designed to work with the T1 ToneMatch® audio engine as well as a choice in bass modules. Easy to transport, and set up in minutes.
Put your PA behind you The vertical configuration of the system's small, closely spaced drivers allows the L1 Model 1S system to project sound forward and to the sides—delivering 180-degree coverage—but very little up and down, reducing unwanted reverberation. This produces consistent tonal balance as sound spreads more evenly across the stage and into the audience, and the volume level drops off much more slowly than with a conventional speaker. Unique Bose® technologies enable the system to serve as both PA and monitor. It can be positioned behind or to the side of the performer—and you hear just what the audience hears. You're in control, and there's no need for conventional monitors, mixers and PA systems. Convenience to go The three components of the L1 Model 1S system—upper array, lower extension and power stand—connect quickly and easily without the need for separate speaker stands. Setup and breakdown take just minutes. And everything stores neatly into the included carry bags, making transport easy, too. Full, flexible bass The high-performance B2 bass module delivers greater low-frequency output when you need more powerful bass for larger audiences. The module includes three settings for increased flexibility. The normal setting is ideal for bass guitar or when miking a kick drum. A higher setting is designed for DJ/music playback applications. And the lower setting works well for acoustic guitar and vocals. Multichannel flexibility The optional T1 ToneMatch audio engine adds four more channels, so you can expand the system and connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools. Key Features
High-performing, powered, portable two-way loudspeaker system with a 195° H x 10° V nominal dispersion designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction. Technical Specifications
System Performance
System Type: Self powered, two-way Frequency Response: (+/-3 dB)1 40 Hz - 12 kHz Frequency Range: (-10 dB)1 32 Hz - 14 kHz Nominal Dispersion: 195° H x 10° V Maximum SPL @ 1 m 112 dB SPL (118 dB SPL peak) Crossover Frequency 200 Hz (24 dB / octave)Amplification
System Power Rating: 375 W Low-Frequency Amplifier: 250 W High-Frequency Amplifier: 125 W Distortion at Rated Power: 0.1 % Max (30 Hz - 15 kHz) System Limiter: Dynamic limiter Overload Protection: Fuse/MOV/NTC/PTC Power Indicator: Blue LED: system on, Red LED: fault
Transducers
Driver Compliment: Top array loudspeaker: Twelve (12) 2.25" (57 mm) HF drivers
B1 bass module: Two (2) 5.25" (133 mm) LF drivers (8 Ω)
B2 bass module: Two (2) 10" (254 mm) LF drivers (4 Ω)
Channel
Signal Indicators: Analog signal/clip LED: Green: signal present, Yellow: -3 dB below clip, Red: clip (limiter active)
Trim: +14 dB @ max
Input: 1/4" - TS unbalanced or TRS balanced
Channel Gain (1/4" input): -50 dB to +28 dB (line)
Maximum Input Signal: +24 dBu (balanced)
Input Impedance: 10 kΩ +/- 10 % (unbalanced) Additional Connections
Bass Module out (for B1 or B2 only): NL4 connector (all pins wired, two for auto sensing). Bass output signal for driving up to two B1 bass modules (1 B1 bass module = 8 Ω) (2 B1
bass modules = 4 Ω) or one B2 bass module (4Ω)ToneMatch
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Bose |
| MPN: | N/A | UPC: | 017817582452 |
Our L1 system offering a unique combination of performance and portability for an audience of up to 300. With a 12-speaker articulated line array providing 180 degrees of clear, even, sound, the system is also designed to work with the T1 ToneMatch® audio engine as well as a choice in bass modules. Easy to transport, and set up in minutes.
Put your PA behind you The vertical configuration of the system's small, closely spaced drivers allows the L1 Model 1S system to project sound forward and to the sides—delivering 180-degree coverage—but very little up and down, reducing unwanted reverberation. This produces consistent tonal balance as sound spreads more evenly across the stage and into the audience, and the volume level drops off much more slowly than with a conventional speaker. Unique Bose® technologies enable the system to serve as both PA and monitor. It can be positioned behind or to the side of the performer—and you hear just what the audience hears. You're in control, and there's no need for conventional monitors, mixers and PA systems. Convenience to go The three components of the L1 Model 1S system—upper array, lower extension and power stand—connect quickly and easily without the need for separate speaker stands. Setup and breakdown take just minutes. And everything stores neatly into the included carry bags, making transport easy, too. Full, flexible bass The high-performance B2 bass module delivers greater low-frequency output when you need more powerful bass for larger audiences. The module includes three settings for increased flexibility. The normal setting is ideal for bass guitar or when miking a kick drum. A higher setting is designed for DJ/music playback applications. And the lower setting works well for acoustic guitar and vocals. Multichannel flexibility The optional T1 ToneMatch audio engine adds four more channels, so you can expand the system and connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools. Key Features
High-performing, powered, portable two-way loudspeaker system with a 195° H x 10° V nominal dispersion designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction.
Technical SpecificationsSystem Performance
System Type: Self powered, two-way Frequency Response: (+/-3 dB)1 40 Hz - 12 kHz Frequency Range: (-10 dB)1 32 Hz - 14 kHz Nominal Dispersion: 195° H x 10° V Maximum SPL @ 1 m 112 dB SPL (118 dB SPL peak) Crossover Frequency 200 Hz (24 dB / octave)Amplification
System Power Rating: 375 W Low-Frequency Amplifier: 250 W High-Frequency Amplifier: 125 W Distortion at Rated Power: 0.1 % Max (30 Hz - 15 kHz) System Limiter: Dynamic limiter Overload Protection: Fuse/MOV/NTC/PTC Power Indicator: Blue LED: system on, Red LED: fault
Transducers
Driver Compliment: Top array loudspeaker: Twelve (12) 2.25" (57 mm) HF drivers
B1 bass module: Two (2) 5.25" (133 mm) LF drivers (8 Ω)
B2 bass module: Two (2) 10" (254 mm) LF drivers (4 Ω)
Channel
Signal Indicators: Analog signal/clip LED: Green: signal present, Yellow: -3 dB below clip, Red: clip (limiter active)
Trim: +14 dB @ max
Input: 1/4" - TS unbalanced or TRS balanced
Channel Gain (1/4" input): -50 dB to +28 dB (line)
Maximum Input Signal: +24 dBu (balanced)
Input Impedance: 10 kΩ +/- 10 % (unbalanced) Additional Connections
Bass Module out (for B1 or B2 only): NL4 connector (all pins wired, two for auto sensing). Bass output signal for driving up to two B1 bass modules (1 B1 bass module = 8 Ω) (2 B1
bass modules = 4 Ω) or one B2 bass module (4Ω)ToneMatch