Back to the main page Back to category Processors
musical instrument details
NEW 2016! AMT ELECTRONICS PANGAEA CP-100 FX IR SPEAKER & PROCESSOR! ONLY ONE!
Estimated price for orientation: 699 $
Category: Processors
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: AMT Electronics AMT Speaker Simulator: Speaker Simulator Model: Pangaea CP-100 FX AMT PROCESSOR: CP-100 FX Country/Region of Manufacture: Russian Federation
Awesome SUPER NEW 2016 product from AMT Electronics!This is not just an IR Speaker Simulator and Effects Processor,
it`s a widely configurable system for professional guitar players on tour,
and just for beginners who on it`s way to become a great players.With help of CP-100 FX you can emulate any guitar speaker cabinets you want.
Just load up the IR settings to your device. You can keep up to 99 presets of IR Speakers in memory of CP-100 FX, you can complete them with different other effects from processor or use them without any other effects.2 main IRs modes:1) Download of one mono IRs with settings 24 bit x 48 kHZ,
with lenght 85,33 ms (4096 sample), with general delay time 1,5 ms2) Separate download of two mono IRs with same settings as in the first
point, but with possibility of volume & panorama control, with general
delay time 1,8 msSimply clever and clear OLED display helps to operate with device very comfortable. Effects processor comes with different modes, but be sure that you need most of them while touring or recording in the studio.1) TUNER for tunning your instrument
2) PR - Pre. Amp emulation of preamp and overload of the vacuum triode
Amplitude Frequency Characteristic of Preamp controls by the classic tone
controls, gain - the sensivity of preamp, volume controls the output signal, which also shown on the OLED display. Preamp module designed for using
with plug-in distortion and overdrive pedals without external preamp.
MAIN SPECS: 5 settings with possibility of edit and save.
OLED indication of the output preamp signal.3) PA. POWER AMP emulation of the overload power amp. That mode
included the Amplitude Frequency Characteristic of standard tube amps
schematics output cascades, two or single-contact, with two types of tubes, such as 6L6 and EL34. MAIN SPECS: 4 settings with possibility of edit
and save. Indication of the output signal.4) EQ - PARAMETRIC EQ 5 band parametric equalizer. MAIN SPECS:
- Gain +/- 15 db, F1 = 20-220 Hz, Q1 = 0,1-10
- Gain +/- 15 db, F2 = 260-460 Hz, Q2 = 0,1-10
- Gain +/- 15 db, F3 = 600-1000 Hz, Q3 = 0,1-10
- Gain +/- 15 db, F4 = 1000-3000 Hz, Q4 = 0,1-10
- Gain +/- 15 db, F5 = 1000-11000 Hz, Q5 = 0,1-10
HPF - low pass supress filter.
LPF - high pass supress filter.
PRESENSE - the setting that controls the rise of high frequecy from the
middle frequency area.5) DL. DELAY.
MAIN SPECS: delay time from 10 to 2730 ms.
12 settings with possibility of edit and save.
Two delay time modes: the main delay time with controlable setting
F_Back and a second delay time mode, which can set up from 0 ms to the
time of the first mode. Delay outputs completed with filter HPF and LPF.
Controlable of the depth and tone of modulation delay time. Reverse mode,
all repeats can be played with reverse function.6) PH. PHASER. MAIN SPECS:
Phase shift with the amount of cells 4,6,8.
6 settings with possibility of edit and save.7) FL. FLANGER. MAIN SPECS:
Controlable delay time.
2 ways of modulation signal: sinus or triangle8) CH. CHORUS. MAIN SPECS:
5 settings with possibility of edit and save.
4 types of chorus effect: 1 line of the delay / 2 lines of the delay,
modulated by antiphase signal in the left and right channels, creating a
stereo effect / 3 lines of the delay time, modulated by three-phase
sinusoidal signal, creating Lesly speaker effect / the same as 3 lines of the
d
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | AMT Electronics |
| AMT Speaker Simulator: | Speaker Simulator | Model: | Pangaea CP-100 FX |
| AMT PROCESSOR: | CP-100 FX | Country/Region of Manufacture: | Russian Federation |
Awesome SUPER NEW 2016 product from AMT Electronics!This is not just an IR Speaker Simulator and Effects Processor,
it`s a widely configurable system for professional guitar players on tour,
and just for beginners who on it`s way to become a great players.With help of CP-100 FX you can emulate any guitar speaker cabinets you want.
Just load up the IR settings to your device. You can keep up to 99 presets of IR Speakers in memory of CP-100 FX, you can complete them with different other effects from processor or use them without any other effects.2 main IRs modes:1) Download of one mono IRs with settings 24 bit x 48 kHZ,
with lenght 85,33 ms (4096 sample), with general delay time 1,5 ms2) Separate download of two mono IRs with same settings as in the first
point, but with possibility of volume & panorama control, with general
delay time 1,8 msSimply clever and clear OLED display helps to operate with device very comfortable. Effects processor comes with different modes, but be sure that you need most of them while touring or recording in the studio.1) TUNER for tunning your instrument
2) PR - Pre. Amp emulation of preamp and overload of the vacuum triode
Amplitude Frequency Characteristic of Preamp controls by the classic tone
controls, gain - the sensivity of preamp, volume controls the output signal, which also shown on the OLED display. Preamp module designed for using
with plug-in distortion and overdrive pedals without external preamp.
MAIN SPECS: 5 settings with possibility of edit and save.
OLED indication of the output preamp signal.3) PA. POWER AMP emulation of the overload power amp. That mode
included the Amplitude Frequency Characteristic of standard tube amps
schematics output cascades, two or single-contact, with two types of tubes, such as 6L6 and EL34. MAIN SPECS: 4 settings with possibility of edit
and save. Indication of the output signal.4) EQ - PARAMETRIC EQ 5 band parametric equalizer. MAIN SPECS:
- Gain +/- 15 db, F1 = 20-220 Hz, Q1 = 0,1-10
- Gain +/- 15 db, F2 = 260-460 Hz, Q2 = 0,1-10
- Gain +/- 15 db, F3 = 600-1000 Hz, Q3 = 0,1-10
- Gain +/- 15 db, F4 = 1000-3000 Hz, Q4 = 0,1-10
- Gain +/- 15 db, F5 = 1000-11000 Hz, Q5 = 0,1-10
HPF - low pass supress filter.
LPF - high pass supress filter.
PRESENSE - the setting that controls the rise of high frequecy from the
middle frequency area.5) DL. DELAY.
MAIN SPECS: delay time from 10 to 2730 ms.
12 settings with possibility of edit and save.
Two delay time modes: the main delay time with controlable setting
F_Back and a second delay time mode, which can set up from 0 ms to the
time of the first mode. Delay outputs completed with filter HPF and LPF.
Controlable of the depth and tone of modulation delay time. Reverse mode,
all repeats can be played with reverse function.6) PH. PHASER. MAIN SPECS:
Phase shift with the amount of cells 4,6,8.
6 settings with possibility of edit and save.7) FL. FLANGER. MAIN SPECS:
Controlable delay time.
2 ways of modulation signal: sinus or triangle8) CH. CHORUS. MAIN SPECS:
5 settings with possibility of edit and save.
4 types of chorus effect: 1 line of the delay / 2 lines of the delay,
modulated by antiphase signal in the left and right channels, creating a
stereo effect / 3 lines of the delay time, modulated by three-phase
sinusoidal signal, creating Lesly speaker effect / the same as 3 lines of the
d
it`s a widely configurable system for professional guitar players on tour,
and just for beginners who on it`s way to become a great players.With help of CP-100 FX you can emulate any guitar speaker cabinets you want.
Just load up the IR settings to your device. You can keep up to 99 presets of IR Speakers in memory of CP-100 FX, you can complete them with different other effects from processor or use them without any other effects.2 main IRs modes:1) Download of one mono IRs with settings 24 bit x 48 kHZ,
with lenght 85,33 ms (4096 sample), with general delay time 1,5 ms2) Separate download of two mono IRs with same settings as in the first
point, but with possibility of volume & panorama control, with general
delay time 1,8 msSimply clever and clear OLED display helps to operate with device very comfortable. Effects processor comes with different modes, but be sure that you need most of them while touring or recording in the studio.1) TUNER for tunning your instrument
2) PR - Pre. Amp emulation of preamp and overload of the vacuum triode
Amplitude Frequency Characteristic of Preamp controls by the classic tone
controls, gain - the sensivity of preamp, volume controls the output signal, which also shown on the OLED display. Preamp module designed for using
with plug-in distortion and overdrive pedals without external preamp.
MAIN SPECS: 5 settings with possibility of edit and save.
OLED indication of the output preamp signal.3) PA. POWER AMP emulation of the overload power amp. That mode
included the Amplitude Frequency Characteristic of standard tube amps
schematics output cascades, two or single-contact, with two types of tubes, such as 6L6 and EL34. MAIN SPECS: 4 settings with possibility of edit
and save. Indication of the output signal.4) EQ - PARAMETRIC EQ 5 band parametric equalizer. MAIN SPECS:
- Gain +/- 15 db, F1 = 20-220 Hz, Q1 = 0,1-10
- Gain +/- 15 db, F2 = 260-460 Hz, Q2 = 0,1-10
- Gain +/- 15 db, F3 = 600-1000 Hz, Q3 = 0,1-10
- Gain +/- 15 db, F4 = 1000-3000 Hz, Q4 = 0,1-10
- Gain +/- 15 db, F5 = 1000-11000 Hz, Q5 = 0,1-10
HPF - low pass supress filter.
LPF - high pass supress filter.
PRESENSE - the setting that controls the rise of high frequecy from the
middle frequency area.5) DL. DELAY.
MAIN SPECS: delay time from 10 to 2730 ms.
12 settings with possibility of edit and save.
Two delay time modes: the main delay time with controlable setting
F_Back and a second delay time mode, which can set up from 0 ms to the
time of the first mode. Delay outputs completed with filter HPF and LPF.
Controlable of the depth and tone of modulation delay time. Reverse mode,
all repeats can be played with reverse function.6) PH. PHASER. MAIN SPECS:
Phase shift with the amount of cells 4,6,8.
6 settings with possibility of edit and save.7) FL. FLANGER. MAIN SPECS:
Controlable delay time.
2 ways of modulation signal: sinus or triangle8) CH. CHORUS. MAIN SPECS:
5 settings with possibility of edit and save.
4 types of chorus effect: 1 line of the delay / 2 lines of the delay,
modulated by antiphase signal in the left and right channels, creating a
stereo effect / 3 lines of the delay time, modulated by three-phase
sinusoidal signal, creating Lesly speaker effect / the same as 3 lines of the
d