The DRS-Q4 mk2 is a 4 Band Gyratory-based Eq with 11 selectable frequencies, and Mic, Line, and DI inputs. We know you will be as pleased with it’s sonic qualities as we are. The DRS-Q4 mk2 has the advantages of more than 25 years experience in audio engineering, today’s component and manufacturing technology, but still retaining “that sound” uniquely achievable through Class A design. Phoenix Audio is dedicated to the development of Class A discrete technology used within high build-quality equipment. The DRS-Q4 mk2 uses our well proven and loved Class A output stage (DSOP-2) coupled with our custom wound output transformer, but also has our latest breakthrough in transformerless Class A, Discrete, truly-balanced Mic Input Technology which gives a “valve-like” sound. It also incorporates our high input impedance DI circuitry. The Gyrator EQ circuit was designed around 40 years ago and was originally designed to emulate the characteristics of a coil or inductor EQ circuit without the issues that they can cause, the result is that our EQ circuit found in the DRSQ4M mk2 is a very powerful but musical EQ perfect for sculpting or crafting vocals, drums or instruments etc whilst still being able to be used on mix bus duties.

1U unit: With 240V/110V mains voltage input selector switchClass A (DSOP-2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB,Maximum Output Level: +26dBu @ 1kHzNoise: -90dB @ 20Hz to 20kHz.Output connections: XLR and TSR 1/4″ Jack on rearPhoenix Audio’s unique Class A, transformer-less, True balanced Mic input stage.Phoenix Audio’s custom wound output transformer.Microphone/Line input: XLR on Rear PanelDI inputs: ¼” TSR Jack on Front PanelIndividual Earth Lift: Push-button SwitchesGain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.Gain reduction: -30dB push-button Mic/Line switch (Mic input)High Input Impedance DI: Mono 1/4″ Jack on front panel (no FETs)Gain Meter: LED Metering. (Green = 0dB, Yellow = +8dB, corresponding to “4” and “6” on a PPM Meter).Phantom Power: Switchable phantom on Push-button SwitchHigh Pass Filter: Roll-off starts at 120Hz @ 12dB per Octave.Phase Reverse: on Push-button SwitchFrequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHzFrequency Response: DI Input Stage: -0.3dB @ 40Hz, – 0.5dB @ 25kHzTypical Headroom: +24dB on Mic-Pre stageGyratory-based EQ Frequency Centres: (4 Bands) High – 15K, 10K, Hi Mid – 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low – 130Hz, 80Hz, 40HzEQ Cut/Boost Levels: 16dB Cut/Boost Per Band with fully detented pots in 21 positionsDI Stage gain: Maximum of 20dBAll units are wired with PTFE silver military grade cable