Back to the main page Back to category Signal Processors or Rack Effect
musical instrument details
AUDIBOX MSX12 4x3 | 4 IN 12 OUT | ISO TRANSFORMER MICROPHONE LINE SPLITTER ARX
Estimated price for orientation: 599 $
Category: Signal Processors or Rack Effect
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: ARX Country/Region of Manufacture: Australia Model: 4x3 1RU SPLITTER Serial No: 2120362 MPN: 6139555002123 UPC: Does not apply
Up for the auction is AUDIBOX MSX12 |SN 2120362| 4x3 1RU SPLITTER | ARX PRO AUDIO | HANDMADE IN AUSTRALIABrand new unit - opened just to make shots, never used.ABOUT MSX12:The ARX MSX 12 Transformer isolated Microphone/Line Splitter has been developed to deliver noise-free audio splitting with minimal setup time. Its intuitive layout and clear, uncluttered labelling enables a quick and easy solution to the increasing complexity of today’s standards of audio production.The MSX 12 is a totally passive device requiring no power, and consists of Four channels of transformer isolated ultra low noise Microphone/Line Splitter. Each of these channels has a direct looped Main/FOH feed, and a transformer isolated Monitor split on the front panel. On the rear panel is an Auxiliary transformer isolated split ideal for use with a remote recording truck or TV feed.
Marker panels on the front provide a space where individual channel connections can be noted.
The all-steel chassis of the MSX 12 provides strong interference resistant shielding. Internally, state-of-the-art transformers deliver superb audio quality and total galvanic isolation.
The MSX 12 is the easy answer to multi channel signal splitting requirements.Features:
Four channel / three way split per channel
Passive unit - no power required
Ultra low noise design
Transformer Balanced Inputs and Outputs
Inputs and Main Outputs hard wired to pass Phantom Power
Intuitive, 'user friendly' layout
Flawless audio performanceApplications:
Houses of worship
Conference centres
Educational facilities
Broadcast splitting
FRONT PANEL:4 x Hardwired balanced XLR Input and Main Outputs. Pin 3–, Pin 2 +, Pin 1 Ground
4 x Hardwired transformer isolated balanced XLR Monitor Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
Marker panel for labelling individual channel assignsREAR PANEL:4 x Hardwired transformer isolated balanced XLR Auxiliary Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
2 x D Sub connectors for Monitor Splits
2 x D Sub connectors for Auxiliary Splits
Screw Terminal Chassis Ground point
------------------------------------
Specifications:
- Input Impedance 300 Ohms
- Output Impedance 2 secondaries @ 600 Ohms each
- Frequency Response 30Hz - 20 KHz ± 1dB
- Maximum Output Level + 20dBm
- THD at Max Output 0.2% 30 Hz - 20KHz @ 20dBm
- Insertion Loss 0.5dB @ 1 KHz (600 Ohm source & load)
- Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold
- Main Output 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold
- Monitor & Aux Output Split 3 pin male XLR wired P
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | ARX |
| Country/Region of Manufacture: | Australia | Model: | 4x3 1RU SPLITTER |
| Serial No: | 2120362 | MPN: | 6139555002123 |
| UPC: | Does not apply |
Up for the auction is AUDIBOX MSX12 |SN 2120362| 4x3 1RU SPLITTER | ARX PRO AUDIO | HANDMADE IN AUSTRALIABrand new unit - opened just to make shots, never used.ABOUT MSX12:The ARX MSX 12 Transformer isolated Microphone/Line Splitter has been developed to deliver noise-free audio splitting with minimal setup time. Its intuitive layout and clear, uncluttered labelling enables a quick and easy solution to the increasing complexity of today’s standards of audio production.The MSX 12 is a totally passive device requiring no power, and consists of Four channels of transformer isolated ultra low noise Microphone/Line Splitter. Each of these channels has a direct looped Main/FOH feed, and a transformer isolated Monitor split on the front panel. On the rear panel is an Auxiliary transformer isolated split ideal for use with a remote recording truck or TV feed.
Marker panels on the front provide a space where individual channel connections can be noted.
The all-steel chassis of the MSX 12 provides strong interference resistant shielding. Internally, state-of-the-art transformers deliver superb audio quality and total galvanic isolation.
The MSX 12 is the easy answer to multi channel signal splitting requirements.Features:
Four channel / three way split per channel
Passive unit - no power required
Ultra low noise design
Transformer Balanced Inputs and Outputs
Inputs and Main Outputs hard wired to pass Phantom Power
Intuitive, 'user friendly' layout
Flawless audio performanceApplications:
Houses of worship
Conference centres
Educational facilities
Broadcast splitting
FRONT PANEL:4 x Hardwired balanced XLR Input and Main Outputs. Pin 3–, Pin 2 +, Pin 1 Ground
4 x Hardwired transformer isolated balanced XLR Monitor Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
Marker panel for labelling individual channel assignsREAR PANEL:4 x Hardwired transformer isolated balanced XLR Auxiliary Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
2 x D Sub connectors for Monitor Splits
2 x D Sub connectors for Auxiliary Splits
Screw Terminal Chassis Ground point
------------------------------------
Specifications:
- Input Impedance 300 Ohms
- Output Impedance 2 secondaries @ 600 Ohms each
- Frequency Response 30Hz - 20 KHz ± 1dB
- Maximum Output Level + 20dBm
- THD at Max Output 0.2% 30 Hz - 20KHz @ 20dBm
- Insertion Loss 0.5dB @ 1 KHz (600 Ohm source & load)
- Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold
- Main Output 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold
- Monitor & Aux Output Split 3 pin male XLR wired P
Marker panels on the front provide a space where individual channel connections can be noted.
The all-steel chassis of the MSX 12 provides strong interference resistant shielding. Internally, state-of-the-art transformers deliver superb audio quality and total galvanic isolation.
The MSX 12 is the easy answer to multi channel signal splitting requirements.Features:
Four channel / three way split per channel
Passive unit - no power required
Ultra low noise design
Transformer Balanced Inputs and Outputs
Inputs and Main Outputs hard wired to pass Phantom Power
Intuitive, 'user friendly' layout
Flawless audio performanceApplications:
Houses of worship
Conference centres
Educational facilities
Broadcast splitting
FRONT PANEL:4 x Hardwired balanced XLR Input and Main Outputs. Pin 3–, Pin 2 +, Pin 1 Ground
4 x Hardwired transformer isolated balanced XLR Monitor Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
Marker panel for labelling individual channel assignsREAR PANEL:4 x Hardwired transformer isolated balanced XLR Auxiliary Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
2 x D Sub connectors for Monitor Splits
2 x D Sub connectors for Auxiliary Splits
Screw Terminal Chassis Ground point
------------------------------------
Specifications:
- Input Impedance 300 Ohms
- Output Impedance 2 secondaries @ 600 Ohms each
- Frequency Response 30Hz - 20 KHz ± 1dB
- Maximum Output Level + 20dBm
- THD at Max Output 0.2% 30 Hz - 20KHz @ 20dBm
- Insertion Loss 0.5dB @ 1 KHz (600 Ohm source & load)
- Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold
- Main Output 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold
- Monitor & Aux Output Split 3 pin male XLR wired P