Back to the main page Back to category Preamps and Channel Strips
musical instrument details
UnderTone Audio MPEQ-1
Estimated price for orientation: 1 200 $
Category: Preamps and Channel Strips
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
The UnderToneAudio MPEQ-1 is the amalgamation of the UTA EQ and UTA's new custom mic pre. You can use the equalizer and the mic pre separately or as a complete channel strip.The mic pre has a custom input transformer and a carefully chosen output transformer. Both are optimized to accentuate the most flattering sonic qualities inherent in audio transformers. The unique mic pre design makes both of the transformers bypass-able. This offers users a choice between the detailed clarity of a Class-A transformer-less design or the vintage musicality of a dual transformer mic preamp. *Have not been able to check the tubes recently, so may or may not need new ones. Other than that, works perfectly. Incredible piece of gear. Features:-10 to -60 dB boost range (in stepped 5 dB increments)Switchable 20 dB padInstrument DIFront panel XLR–1/4" (DI) combo inputPhase reverse switch+ 48 V phantom power+/- 10 dB trim knobBypass-able input and output transformersAbility to use mic-pre and UTA EQ on separate signals.Inputs/Outputs (all XLR):
Mic-pre InputMic-pre direct Line OutputLine InputEQ Line Output - w/ output transformerEQ Line Output - w/o output transformer Specifications:Input Impedance:Mic In transformerless: 2K ohms MIc In 200 Ω: 2K ohms MIc In 50 Ω: 500 ohms Line In: Greater than 10K Output Impedance: Mic Out: 47 ohms Main Out Transformerless: 47 ohms Main Out with Transformer: 120 ohms Frequencey Response:Mic Preamp: 10 Hz - 80 kHz +0 /-1 dB Line In/Out: 10 Hz - 50 kHz +0 /-1 dB Noise Floor:Mic Preamp: -128 dBu (20 Hz - 20 kHz) Line Level Circuit: -91.5 dBu (20 Hz - 20 kHz) Max Level Before Clip:Mic Preamp: +27 dBu (or better) Line Level Circuit: +27 dBu (or better) Distortion: Mic Preamp: .003% at +27 dBu Line Level Circuit: .015% at +27 dBu Dimensions:Front to Back: 12.25” (with heat sinks and knobs: 14”) Left to Right: 17.25” (with rack ears: 19”) Weight: 10 lbs
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
The UnderToneAudio MPEQ-1 is the amalgamation of the UTA EQ and UTA's new custom mic pre. You can use the equalizer and the mic pre separately or as a complete channel strip.The mic pre has a custom input transformer and a carefully chosen output transformer. Both are optimized to accentuate the most flattering sonic qualities inherent in audio transformers. The unique mic pre design makes both of the transformers bypass-able. This offers users a choice between the detailed clarity of a Class-A transformer-less design or the vintage musicality of a dual transformer mic preamp. *Have not been able to check the tubes recently, so may or may not need new ones. Other than that, works perfectly. Incredible piece of gear. Features:-10 to -60 dB boost range (in stepped 5 dB increments)Switchable 20 dB padInstrument DIFront panel XLR–1/4" (DI) combo inputPhase reverse switch+ 48 V phantom power+/- 10 dB trim knobBypass-able input and output transformersAbility to use mic-pre and UTA EQ on separate signals.Inputs/Outputs (all XLR):
Mic-pre InputMic-pre direct Line OutputLine InputEQ Line Output - w/ output transformerEQ Line Output - w/o output transformer Specifications:Input Impedance:Mic In transformerless: 2K ohms MIc In 200 Ω: 2K ohms MIc In 50 Ω: 500 ohms Line In: Greater than 10K Output Impedance: Mic Out: 47 ohms Main Out Transformerless: 47 ohms Main Out with Transformer: 120 ohms Frequencey Response:Mic Preamp: 10 Hz - 80 kHz +0 /-1 dB Line In/Out: 10 Hz - 50 kHz +0 /-1 dB Noise Floor:Mic Preamp: -128 dBu (20 Hz - 20 kHz) Line Level Circuit: -91.5 dBu (20 Hz - 20 kHz) Max Level Before Clip:Mic Preamp: +27 dBu (or better) Line Level Circuit: +27 dBu (or better) Distortion: Mic Preamp: .003% at +27 dBu Line Level Circuit: .015% at +27 dBu Dimensions:Front to Back: 12.25” (with heat sinks and knobs: 14”) Left to Right: 17.25” (with rack ears: 19”) Weight: 10 lbs
Mic-pre InputMic-pre direct Line OutputLine InputEQ Line Output - w/ output transformerEQ Line Output - w/o output transformer Specifications:Input Impedance:Mic In transformerless: 2K ohms MIc In 200 Ω: 2K ohms MIc In 50 Ω: 500 ohms Line In: Greater than 10K Output Impedance: Mic Out: 47 ohms Main Out Transformerless: 47 ohms Main Out with Transformer: 120 ohms Frequencey Response:Mic Preamp: 10 Hz - 80 kHz +0 /-1 dB Line In/Out: 10 Hz - 50 kHz +0 /-1 dB Noise Floor:Mic Preamp: -128 dBu (20 Hz - 20 kHz) Line Level Circuit: -91.5 dBu (20 Hz - 20 kHz) Max Level Before Clip:Mic Preamp: +27 dBu (or better) Line Level Circuit: +27 dBu (or better) Distortion: Mic Preamp: .003% at +27 dBu Line Level Circuit: .015% at +27 dBu Dimensions:Front to Back: 12.25” (with heat sinks and knobs: 14”) Left to Right: 17.25” (with rack ears: 19”) Weight: 10 lbs