Back to the main page Back to category Speakers and Monitors
musical instrument details
DAS Audio Variant 25A Line Array (10). Variant 18A Subwoofers (4)
Estimated price for orientation: 9 999 $
Category: Speakers and Monitors
Class:
Description
Variant 25A- Powered two-way mid-high system
– Two channel Class AB amplifier 250 W LF + 150 W HF
– Two 5” loudspeakers for bass reproduction
– Neodymium compression driver with 1” exit
– Captive rigging system integrated in the cabinet design
– Wide range of mounting accessoriesThe Variant 25A is a powered, bi-amplified ultra-compact array module designed for use as a multi-box array in small to mid-sized installations, as a fill unit for front and under-balcony fills, or combined with other D.A.S. line array systems.The loudspeaker components of the Variant 25A include two 5B, 5” cone transducers. A high efficiency, low distortion M-50N neodymium compression driver with 2” titanium diaphragm offers reliability, high output and wide dynamic range. The D.A.S. designed SERPIS-25 high frequency plane wave generator provides coherent summing of the high frequencies. Power for the Variant 25A is provided by a twin channel class AB amplifier. The unit offers a power rating of 250 W peak for the low frequency transducers and 150 W peak for the high frequency section. Included in the electronics package is the active crossover, signal processing, limitation and protection circuitry.Nominal LF Amplifier Power 250 W Peak, 125 W Continuous Nominal HF Amplifier Power 150 W Peak, 75 W Continuous Frequency Range (-10 dB) 75 Hz-17 kHz Rated Peak SPL at 1 m 120 dB Dispersion Horizontal: 90º
Vertical: Splay Dependent Enclosure Material Plywood Color/Finish Black or White/Paint Connectors Input: Female XLR
Lopp Thru: Male XLR
AC Input: PowerCON
AC Output: PowerCON AC Requirements 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz Current Draw (1/3 power @ 230 V) 0.45 A Dimensions (H x W x D) 17.4 x 57.4 x 23.1 cm
6.9 x 22.6 x 9 in Weight 18 kg (39.6 lb)
Variant 18A Sub- Powered Subwoofer System
- Single channel Class D amplifier 2500 W Peak
- 18” loudspeaker with 4” voice coil
- Bass-reflex design
- Captive rigging system integrated in the cabinet designThe Variant 18A compact subwoofer system is the ideal complement for the Variant 25A, extending the bandwidth of the array to 30 Hz. The cabinet design incorporates rigging hardware that permits a column of Variant 25A´s to be flown from or stacked above the Variant 18A.The Variant 18A utilizes a single 18” cone transducer. The 18H loudspeaker incorporates a 4” (100 mm) edge-wound flat wire (EFW) voice coil and carefully engineered cooling scheme that efficiently evacuates voice coil heat. A class D amplifier rated at 2500 W peak powers the Variant 18A. The limiter/compressor protects the loudspeaker components without compromising sound quality providing virtually transparent limiting even when driven to maximum output levels.Nominal LF Amplifier Power 2500 W Peak
1250 W Continuous Frequency Range (-10 dB) 30 Hz-138 Hz Rated Peak SPL at 1 m 134 dB Internal Crossover Electronic Connectors Input: Female XLR
Loop Thru: Male XLR
Satellite Out: Male XLR
AC Input: PowerCON AC Requirements 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz Current Draw (1/3 power @ 230 V) 1.8 A Enclosure Material Plywood Color/Finish Black or White/Paint Dimensions (H x W x D) 50.7 x 57.4 x 65 cm
19.9 x 22.6 x 25.6 in Weight 45.6 kg (100.3 lb)
Contact for shipping information. Buyer is responsible for all shipping costs.
Description
Variant 25A- Powered two-way mid-high system
– Two channel Class AB amplifier 250 W LF + 150 W HF
– Two 5” loudspeakers for bass reproduction
– Neodymium compression driver with 1” exit
– Captive rigging system integrated in the cabinet design
– Wide range of mounting accessoriesThe Variant 25A is a powered, bi-amplified ultra-compact array module designed for use as a multi-box array in small to mid-sized installations, as a fill unit for front and under-balcony fills, or combined with other D.A.S. line array systems.The loudspeaker components of the Variant 25A include two 5B, 5” cone transducers. A high efficiency, low distortion M-50N neodymium compression driver with 2” titanium diaphragm offers reliability, high output and wide dynamic range. The D.A.S. designed SERPIS-25 high frequency plane wave generator provides coherent summing of the high frequencies. Power for the Variant 25A is provided by a twin channel class AB amplifier. The unit offers a power rating of 250 W peak for the low frequency transducers and 150 W peak for the high frequency section. Included in the electronics package is the active crossover, signal processing, limitation and protection circuitry.
Variant 18A Sub
– Two channel Class AB amplifier 250 W LF + 150 W HF
– Two 5” loudspeakers for bass reproduction
– Neodymium compression driver with 1” exit
– Captive rigging system integrated in the cabinet design
– Wide range of mounting accessoriesThe Variant 25A is a powered, bi-amplified ultra-compact array module designed for use as a multi-box array in small to mid-sized installations, as a fill unit for front and under-balcony fills, or combined with other D.A.S. line array systems.The loudspeaker components of the Variant 25A include two 5B, 5” cone transducers. A high efficiency, low distortion M-50N neodymium compression driver with 2” titanium diaphragm offers reliability, high output and wide dynamic range. The D.A.S. designed SERPIS-25 high frequency plane wave generator provides coherent summing of the high frequencies. Power for the Variant 25A is provided by a twin channel class AB amplifier. The unit offers a power rating of 250 W peak for the low frequency transducers and 150 W peak for the high frequency section. Included in the electronics package is the active crossover, signal processing, limitation and protection circuitry.
| Nominal LF Amplifier Power | 250 W Peak, 125 W Continuous |
| Nominal HF Amplifier Power | 150 W Peak, 75 W Continuous |
| Frequency Range (-10 dB) | 75 Hz-17 kHz |
| Rated Peak SPL at 1 m | 120 dB |
| Dispersion | Horizontal: 90º Vertical: Splay Dependent |
| Enclosure Material | Plywood |
| Color/Finish | Black or White/Paint |
| Connectors | Input: Female XLR Lopp Thru: Male XLR AC Input: PowerCON AC Output: PowerCON |
| AC Requirements | 115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz |
| Current Draw (1/3 power @ 230 V) | 0.45 A |
| Dimensions (H x W x D) | 17.4 x 57.4 x 23.1 cm 6.9 x 22.6 x 9 in |
| Weight | 18 kg (39.6 lb) |
- Powered Subwoofer System
- Single channel Class D amplifier 2500 W Peak
- 18” loudspeaker with 4” voice coil
- Bass-reflex design
- Captive rigging system integrated in the cabinet designThe Variant 18A compact subwoofer system is the ideal complement for the Variant 25A, extending the bandwidth of the array to 30 Hz. The cabinet design incorporates rigging hardware that permits a column of Variant 25A´s to be flown from or stacked above the Variant 18A.The Variant 18A utilizes a single 18” cone transducer. The 18H loudspeaker incorporates a 4” (100 mm) edge-wound flat wire (EFW) voice coil and carefully engineered cooling scheme that efficiently evacuates voice coil heat. A class D amplifier rated at 2500 W peak powers the Variant 18A. The limiter/compressor protects the loudspeaker components without compromising sound quality providing virtually transparent limiting even when driven to maximum output levels.
Contact for shipping information. Buyer is responsible for all shipping costs.- Single channel Class D amplifier 2500 W Peak
- 18” loudspeaker with 4” voice coil
- Bass-reflex design
- Captive rigging system integrated in the cabinet designThe Variant 18A compact subwoofer system is the ideal complement for the Variant 25A, extending the bandwidth of the array to 30 Hz. The cabinet design incorporates rigging hardware that permits a column of Variant 25A´s to be flown from or stacked above the Variant 18A.The Variant 18A utilizes a single 18” cone transducer. The 18H loudspeaker incorporates a 4” (100 mm) edge-wound flat wire (EFW) voice coil and carefully engineered cooling scheme that efficiently evacuates voice coil heat. A class D amplifier rated at 2500 W peak powers the Variant 18A. The limiter/compressor protects the loudspeaker components without compromising sound quality providing virtually transparent limiting even when driven to maximum output levels.
| Nominal LF Amplifier Power | 2500 W Peak 1250 W Continuous |
| Frequency Range (-10 dB) | 30 Hz-138 Hz |
| Rated Peak SPL at 1 m | 134 dB |
| Internal Crossover | Electronic |
| Connectors | Input: Female XLR Loop Thru: Male XLR Satellite Out: Male XLR AC Input: PowerCON |
| AC Requirements | 115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz |
| Current Draw (1/3 power @ 230 V) | 1.8 A |
| Enclosure Material | Plywood |
| Color/Finish | Black or White/Paint |
| Dimensions (H x W x D) | 50.7 x 57.4 x 65 cm 19.9 x 22.6 x 25.6 in |
| Weight | 45.6 kg (100.3 lb) |