Back to the main page Back to category Audio or MIDI Interfaces
musical instrument details
APOGEE A8MP 8CH Microphone preamp module for SYMPHONY I/O NEW
Estimated price for orientation: 1 390 $
Category: Audio or MIDI Interfaces
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Apogee Max. Number of Channels: 8 Model: APOGEE A8MP Country//Region of Manufacture: United States MPN: A8MP UPC: 805676 300788
The A8MP from Apogee is a module for the company's Symphony system that enhances the system's analog input by adding 8 microphone preamps. Additionally, up to 4 instrument inputs can be connected directly to the module and twin D-Sub connectors deliver 8 fully balanced inserts points.
Microphones do not connect directly to the Mic Preamp Module. They must be connected to the analog inputs of an analog I/O Module that has been installed in slot 1 of the Symphony chassis. The microphone preamps are then enabled in the Maestro software. Phantom power can also be enabled individually from the software.Eight digitally controlled, 85dB microphone preamps
Upgrades functionality of Analog I/O Module by adding microphone preamps to the existing line inputs
Creates a direct connection between the Mic Preamp Module and the Analog I/O Module by inserting a microphone preamp stage before the line inputs
Phantom power individually switchable (via Maestro)
Four Hi-Z 1/4" instrument inputs capable of handling high level instruments
Eight fully balanced insert points on 25-pin D-Sub connectorsSPECIFICATIONS:ADC 24-bit
DAC 24-bit
Sample Rates Up to 192kHz
Analog In 4 x 1/4" TS phone
1 x 25-pin D-Sub Insert Returns (requires optional breakout cable)
Input Impedance 10kΩ
Maximum Input Level +4dB setting: +24dBu
-10dB setting: +6dBV
Analog Outputs 1 x 25-pin D-Sub Insert Sends (requires optional breakout cable)
Output Impedance 25Ω
Maximum Output Level ∞ to +24dBu
Digital Input Connectors No
Digital Output Connectors No
Dynamic Range A/D: 120dB, A-weighted
D/A: 129dB, A-weighted
THD + N A/D: -113dB @ 20dBu (0.00024%)
D/A: -117dB @ 20dBu (0.00014%)
Frequency Response A/D: 1Hz to 20kHz (+/-0.05dB)@ 44.1kHz
D/A: DC to 20kHz (+/-0.05dB)@ 44.1kHz
Word Clock On chassis
Power Requirements From chassis
Dimensions (WxDxH) Fits slot on chassis
Packaging Info
Package Weight 3.1 lb
Box Dimensions (LxWxH) 14.2 x 13.7 x 3.6"
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Apogee |
| Max. Number of Channels: | 8 | Model: | APOGEE A8MP |
| Country//Region of Manufacture: | United States | MPN: | A8MP |
| UPC: | 805676 300788 |
The A8MP from Apogee is a module for the company's Symphony system that enhances the system's analog input by adding 8 microphone preamps. Additionally, up to 4 instrument inputs can be connected directly to the module and twin D-Sub connectors deliver 8 fully balanced inserts points.
Microphones do not connect directly to the Mic Preamp Module. They must be connected to the analog inputs of an analog I/O Module that has been installed in slot 1 of the Symphony chassis. The microphone preamps are then enabled in the Maestro software. Phantom power can also be enabled individually from the software.Eight digitally controlled, 85dB microphone preamps
Upgrades functionality of Analog I/O Module by adding microphone preamps to the existing line inputs
Creates a direct connection between the Mic Preamp Module and the Analog I/O Module by inserting a microphone preamp stage before the line inputs
Phantom power individually switchable (via Maestro)
Four Hi-Z 1/4" instrument inputs capable of handling high level instruments
Eight fully balanced insert points on 25-pin D-Sub connectorsSPECIFICATIONS:ADC 24-bit
DAC 24-bit
Sample Rates Up to 192kHz
Analog In 4 x 1/4" TS phone
1 x 25-pin D-Sub Insert Returns (requires optional breakout cable)
Input Impedance 10kΩ
Maximum Input Level +4dB setting: +24dBu
-10dB setting: +6dBV
Analog Outputs 1 x 25-pin D-Sub Insert Sends (requires optional breakout cable)
Output Impedance 25Ω
Maximum Output Level ∞ to +24dBu
Digital Input Connectors No
Digital Output Connectors No
Dynamic Range A/D: 120dB, A-weighted
D/A: 129dB, A-weighted
THD + N A/D: -113dB @ 20dBu (0.00024%)
D/A: -117dB @ 20dBu (0.00014%)
Frequency Response A/D: 1Hz to 20kHz (+/-0.05dB)@ 44.1kHz
D/A: DC to 20kHz (+/-0.05dB)@ 44.1kHz
Word Clock On chassis
Power Requirements From chassis
Dimensions (WxDxH) Fits slot on chassis
Packaging Info
Package Weight 3.1 lb
Box Dimensions (LxWxH) 14.2 x 13.7 x 3.6"
Microphones do not connect directly to the Mic Preamp Module. They must be connected to the analog inputs of an analog I/O Module that has been installed in slot 1 of the Symphony chassis. The microphone preamps are then enabled in the Maestro software. Phantom power can also be enabled individually from the software.Eight digitally controlled, 85dB microphone preamps
Upgrades functionality of Analog I/O Module by adding microphone preamps to the existing line inputs
Creates a direct connection between the Mic Preamp Module and the Analog I/O Module by inserting a microphone preamp stage before the line inputs
Phantom power individually switchable (via Maestro)
Four Hi-Z 1/4" instrument inputs capable of handling high level instruments
Eight fully balanced insert points on 25-pin D-Sub connectorsSPECIFICATIONS:ADC 24-bit
DAC 24-bit
Sample Rates Up to 192kHz
Analog In 4 x 1/4" TS phone
1 x 25-pin D-Sub Insert Returns (requires optional breakout cable)
Input Impedance 10kΩ
Maximum Input Level +4dB setting: +24dBu
-10dB setting: +6dBV
Analog Outputs 1 x 25-pin D-Sub Insert Sends (requires optional breakout cable)
Output Impedance 25Ω
Maximum Output Level ∞ to +24dBu
Digital Input Connectors No
Digital Output Connectors No
Dynamic Range A/D: 120dB, A-weighted
D/A: 129dB, A-weighted
THD + N A/D: -113dB @ 20dBu (0.00024%)
D/A: -117dB @ 20dBu (0.00014%)
Frequency Response A/D: 1Hz to 20kHz (+/-0.05dB)@ 44.1kHz
D/A: DC to 20kHz (+/-0.05dB)@ 44.1kHz
Word Clock On chassis
Power Requirements From chassis
Dimensions (WxDxH) Fits slot on chassis
Packaging Info
Package Weight 3.1 lb
Box Dimensions (LxWxH) 14.2 x 13.7 x 3.6"