Back to the main page Back to category ElectroHarmonix

musical instrument details

NEW Electro Harmonix 44 Magnum 44 Watt Power Amp Amplifier w/EHX Power Supply

Estimated price for orientation: 999 $

Category: ElectroHarmonix
Class:











Description
Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Electro-Harmonix
MPN: 44mag Model: 44 Magnum
Country/Region of Manufacture: United States UPC: 683274011073


Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h)-CONTROLS and JACKS-
VOLUME CONTROL — This knob controls the volume or loudness of the amplifier. As you turn the VOLUME knob clockwise, the 44 MAGNUM’s output gets louder. At a certain point in the VOLUME knob’s travel the output will start to overdrive, at this point you are beginning to exceed 44 Watts on your loudest notes. Turning the VOLUME knob further clockwise will produce a more overdriven sound which is the result of pure power amp saturation.
BRIGHT/NORM CONTROL- When engaged, the BRIGHT switch adds a subtle top boost or presence to your signal. When in the NORM position, the top boost is defeated. INPUT Jack- Plug the output of your guitar, effects pedals or any other instrument into the INPUT jack using a standard ” instrument cable. The input impedance presented at the INPUT jack is 2 Mohm. 8 — 16 ohm OUTPUT Jack — Connect the 44 MAGNUM’s OUTPUT jack directly to a speaker cabinet. 8 ohm - 16 ohm only. WARNING: NEVER CONNECT THE OUTPUT OF THE 44 MAGNUM TO THE INPUT OF ANOTHER AMPLIFIER, AN EFFECTS PEDAL, MIXER, COMPUTER, COMPUTER INTERFACE OR OTHER SIMILAR DEVICE. We recommend using a speaker cable between the 44 MAGNUM and speaker cabinet as you would with any power amplifier, though you can get away with using an instrument cable if absolutely necessary. The impedance of the speaker cabinet must be rated between 8 ohm and 16 ohm. 8 ohm is the ideal load for the 44 MAGNUM. Additionally the speaker cabinet must have a power rating equal to or greater than the 44 MAGNUM’s output power capability. We recommend a speaker cabinet with at least a 50W peak rating (or 25W RMS). WARNING: Make sure the 44 MAGNUM’s output is connected to a speaker cabinet before applying power.
 
24VDC/3A POWER Jack — Connect the output plug from the 44 MAGNUM’s supplied power supply to the power jack at the top of the unit. Only use the power supply that the 44 MAGNUM was supplied with. The 44 MAGNUM requires a power supply capable of delivering at least 2A (more available current is better) at exactly 24 VDC. DO NOT EXCEED 24 VDC ON THE POWER JACK, doing so will damage the 44 MAGNUM. DO NOT CONNECT AN AC POWER SUPPLY VOLTAGE TO THE 44 MAGNUM, USE DC POWER ONLY. The polarity of the power jack is center positive.