Back to the main page Back to category Live and Studio Mixers
musical instrument details
Hear Technologies Hear Back Four Pack + extra one (5)
Estimated price for orientation: 750 $
Category: Live and Studio Mixers
Class:
Description Brand: Hear Technologies
Very easy to use! List price over $2000 (with 5 mixers). A basic Hear Back system consists of a Hub and personal Mixers connected using standard CAT5E cables. A single Hub supplies signal and power to a maximum of eight Mixers. That’s one for you and everybody in the band. If that’s not enough, the Hubs can be daisy-chained using the HearBus In and Out for virtually unlimited system size. The Hear Back Hub can accept analog input signals from audio mixers, auxiliary, matrix, monitor, and/or direct outputs. Hub & mixers are included, Cat 5 cables not included, we recommend getting Cat 5, 6 or 7. The ADAT input can come from digital audio workstations, digital recorders, or digital mixers. For front of house or remotely located digital mixers, we also have the Extreme Extender ADAT In/Out that converts ADAT optical, which has very limited distance, to the HearBus for transmission of up to 500 feet. Our solution, Hear Back, has several key advantages Virtually unlimited system size Very attractive pricing Excellent audio fidelity Built-in DSP Limiter Very long digital lines possible without loss of audio quality Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel. Local control of up to ten channels of audio (8 inputs plus a stereo Aux input) Master Volume (controls the level to the headphones, line outs and the Aux input to the line outputs) Built-in DSP Limiter (designed as a “brick wall” limiter for hearing protection and to protect monitor wedges from overload) Headphone amplifier fault indicator in case of over temperature, or a short, the red LED comes on to alert the user something is a problem.A second visual trouble shooting aid for the user is the Bus status indicator Link Indicators – Whenever two pairs of mono inputs are linked for stereo operation the link LED is illuminated Standard CAT5E power and signal Connection, cost effective, simple, non-obtrusive way to connect eight channels of audio. The Cable is held in place with a “built-in cable strain relief” Balanced Line-Outs, Mono/Stereo Stereo AUX In Built-in Mic Stand Mount may be mounted to a standard mic stand or clipped onto a stand extension bar or clip High Power – Low Distortion Headphone Amplifiers One of the industry's most powerful headphone amplifiersGood Luck!
Description
| Brand: | Hear Technologies |
Very easy to use! List price over $2000 (with 5 mixers).
A basic Hear Back system consists of a Hub and personal Mixers connected using standard CAT5E cables. A single Hub supplies signal and power to a maximum of eight Mixers. That’s one for you and everybody in the band. If that’s not enough, the Hubs can be daisy-chained using the HearBus In and Out for virtually unlimited system size. The Hear Back Hub can accept analog input signals from audio mixers, auxiliary, matrix, monitor, and/or direct outputs. Hub & mixers are included, Cat 5 cables not included, we recommend getting Cat 5, 6 or 7.
The ADAT input can come from digital audio workstations, digital recorders, or digital mixers. For front of house or remotely located digital mixers, we also have the Extreme Extender ADAT In/Out that converts ADAT optical, which has very limited distance, to the HearBus for transmission of up to 500 feet. Our solution, Hear Back, has several key advantages Virtually unlimited system size Very attractive pricing Excellent audio fidelity Built-in DSP Limiter Very long digital lines possible without loss of audio quality Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel. Local control of up to ten channels of audio (8 inputs plus a stereo Aux input) Master Volume (controls the level to the headphones, line outs and the Aux input to the line outputs) Built-in DSP Limiter (designed as a “brick wall” limiter for hearing protection and to protect monitor wedges from overload) Headphone amplifier fault indicator in case of over temperature, or a short, the red LED comes on to alert the user something is a problem.A second visual trouble shooting aid for the user is the Bus status indicator Link Indicators – Whenever two pairs of mono inputs are linked for stereo operation the link LED is illuminated Standard CAT5E power and signal Connection, cost effective, simple, non-obtrusive way to connect eight channels of audio. The Cable is held in place with a “built-in cable strain relief” Balanced Line-Outs, Mono/Stereo Stereo AUX In Built-in Mic Stand Mount may be mounted to a standard mic stand or clipped onto a stand extension bar or clip High Power – Low Distortion Headphone Amplifiers One of the industry's most powerful headphone amplifiersGood Luck!