Back to the main page Back to category Microphones and Speakers
musical instrument details
K-Array 21" Powered Sub with 2 KP102 Python Line Arrays
Estimated price for orientation: 3 500 $
Category: Microphones and Speakers
Class:
Description Brand: K-Array MPN: KMT21 + 2 KP102 Python Model: KMT21 and 2 KP102 Pythons Features: Full Range Configuration, Input Gain Control, Microphone Input Type: Line Array Speaker System Country/Region of Manufacture: Italy Active/Passive: Active RMS Power: 4000W UPC: Does not apply
This auction is for an open box new KMT21 self powered Subwoofer and 2 KP102 Python Line Arrays. All hardware and cables are included. This is an extremely powerful portable system suitable for an outdoor concert or night club. This entire system has been tested together with the included cables and is working perfectly. This system sells new for $7,000. More information is below. The KMT21 1600W Powered Subwoofer with DSP from K-array is a complete audio system, featuring a 21” powered subwoofer, programmable on-board DSP, and multiple analog and digital inputs & outputs for creating a broad range of speaker configurations. Equipped with a codec that lowers the signal/noise ratio, the KMT21 Subwoofer comes with a 5 VDC power connector on the rear panel, and enhanced functionality for creating presets. The AES/EBU output is latency-free (thru).
The KMT21 Subwoofer features an integrated touchscreen that provides intuitive control over the main DSP functions including input/output levels, signal routing, offset delays for subwoofer and speaker output (up to 10 ms, each) and overall system delay (up to 330 ms). All DSP functions, including EQ, can also be remote controlled via software over USB or RS485 (3-pin XLR). The subwoofer further provides two balanced analog line-level inputs and a two-channel AES/EBU digital input. An integrated Class-D amplifier delivers 2 x 2400W at 4 ohms, with a max THD of 1% (EIAJ test @ 1 kHz). The rear panel features multiple analog and digital outputs, including a Speakon output to connect a wide array of passive speakers including Kobra & Python mid-high modules or KMT21P additional passive subwoofers (sold separately). To optimize performance, the on-board DSP includes presets to drive K-array speakers. The KMT21 Subwoofer’s four-corner port configuration provides symmetrical back-loading to the speakers for extended bass response with low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight. Pocket handles and an M20 thread-mount position for attaching mid-high speakers makes it convenient to use and ideal for medium-throw applications in theaters, concert halls, and audio/video installations. General
Compact size, yet strong performance
Direct-radiating, long-excursion driver
Fast setup and dismantling system
Fitted with integrated handles and casters
Analog and digital AES/EBU inputs
Remote software control over USB and RS485
Designed for use with the KP52/KP102 and KMT21P Subwoofer
Applications
Theatrical sound reinforcement
Concert halls, clubs, houses of worship
Portable and installed audio-visual systems
Cinema and special effects
Description
| Brand: | K-Array | MPN: | KMT21 + 2 KP102 Python |
| Model: | KMT21 and 2 KP102 Pythons | Features: | Full Range Configuration, Input Gain Control, Microphone Input |
| Type: | Line Array Speaker System | Country/Region of Manufacture: | Italy |
| Active/Passive: | Active | RMS Power: | 4000W |
| UPC: | Does not apply |
This auction is for an open box new KMT21 self powered Subwoofer and 2 KP102 Python Line Arrays. All hardware and cables are included. This is an extremely powerful portable system suitable for an outdoor concert or night club. This entire system has been tested together with the included cables and is working perfectly. This system sells new for $7,000. More information is below. The KMT21 1600W Powered Subwoofer with DSP from K-array is a complete audio system, featuring a 21” powered subwoofer, programmable on-board DSP, and multiple analog and digital inputs & outputs for creating a broad range of speaker configurations. Equipped with a codec that lowers the signal/noise ratio, the KMT21 Subwoofer comes with a 5 VDC power connector on the rear panel, and enhanced functionality for creating presets. The AES/EBU output is latency-free (thru).
The KMT21 Subwoofer features an integrated touchscreen that provides intuitive control over the main DSP functions including input/output levels, signal routing, offset delays for subwoofer and speaker output (up to 10 ms, each) and overall system delay (up to 330 ms). All DSP functions, including EQ, can also be remote controlled via software over USB or RS485 (3-pin XLR). The subwoofer further provides two balanced analog line-level inputs and a two-channel AES/EBU digital input. An integrated Class-D amplifier delivers 2 x 2400W at 4 ohms, with a max THD of 1% (EIAJ test @ 1 kHz). The rear panel features multiple analog and digital outputs, including a Speakon output to connect a wide array of passive speakers including Kobra & Python mid-high modules or KMT21P additional passive subwoofers (sold separately). To optimize performance, the on-board DSP includes presets to drive K-array speakers. The KMT21 Subwoofer’s four-corner port configuration provides symmetrical back-loading to the speakers for extended bass response with low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight. Pocket handles and an M20 thread-mount position for attaching mid-high speakers makes it convenient to use and ideal for medium-throw applications in theaters, concert halls, and audio/video installations. General
Compact size, yet strong performance
Direct-radiating, long-excursion driver
Fast setup and dismantling system
Fitted with integrated handles and casters
Analog and digital AES/EBU inputs
Remote software control over USB and RS485
Designed for use with the KP52/KP102 and KMT21P Subwoofer
Applications
Theatrical sound reinforcement
Concert halls, clubs, houses of worship
Portable and installed audio-visual systems
Cinema and special effects
The KMT21 Subwoofer features an integrated touchscreen that provides intuitive control over the main DSP functions including input/output levels, signal routing, offset delays for subwoofer and speaker output (up to 10 ms, each) and overall system delay (up to 330 ms). All DSP functions, including EQ, can also be remote controlled via software over USB or RS485 (3-pin XLR). The subwoofer further provides two balanced analog line-level inputs and a two-channel AES/EBU digital input. An integrated Class-D amplifier delivers 2 x 2400W at 4 ohms, with a max THD of 1% (EIAJ test @ 1 kHz). The rear panel features multiple analog and digital outputs, including a Speakon output to connect a wide array of passive speakers including Kobra & Python mid-high modules or KMT21P additional passive subwoofers (sold separately). To optimize performance, the on-board DSP includes presets to drive K-array speakers. The KMT21 Subwoofer’s four-corner port configuration provides symmetrical back-loading to the speakers for extended bass response with low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight. Pocket handles and an M20 thread-mount position for attaching mid-high speakers makes it convenient to use and ideal for medium-throw applications in theaters, concert halls, and audio/video installations. General
Compact size, yet strong performance
Direct-radiating, long-excursion driver
Fast setup and dismantling system
Fitted with integrated handles and casters
Analog and digital AES/EBU inputs
Remote software control over USB and RS485
Designed for use with the KP52/KP102 and KMT21P Subwoofer
Applications
Theatrical sound reinforcement
Concert halls, clubs, houses of worship
Portable and installed audio-visual systems
Cinema and special effects