Back to the main page Back to category AudioTechnica AT
musical instrument details
AUDIO-TECHNICA AT4047MP Multi-pattern Condenser Microphone
Estimated price for orientation: 915 $
Category: AudioTechnica AT
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: AUDIO-TECHNICA Model: AT4047MP MPN: 4961310108724 UPC: Does not apply
Description Three switchable polar patterns: cardioid, omnidirectional, figure-of-eight
Engineered to meet the critical acoustic requirements of professional recording, broadcast and sound reinforcement
Transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
Exceptionally low self-noise, wide dynamic range and high SPL capability
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Vintage silver-matte finish on microphone and shock mount
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
Custom shock mount provides superior isolation
Integral 80 Hz high-pass filter switch and 10 dB pad switch
Certified by the METAlliance (Music Engineering and Technology Alliance)ELEMENT: Externally-polarized (DC bias) condenser
POLAR PATTERNS: Cardioid,
Omnidirectional,
Figure-of-eight
FREQUENCY RESPONSE: 20-18,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: -42 dB (7.9 mV), re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 155 dB SPL, 1 kHz at 1% T.H.D.;
165 dB SPL, with 10 dB pad (nominal)
NOISE: 14 dB
DYNAMIC RANGE (typical): 141 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 3.4 mA typical
SWITCHES: Polar selection;
Flat, roll-off;
10 dB pad (nominal)
WEIGHT: 524 g (18.5 oz)
DIMENSIONS: 188.0 mm (7.40") long,
53.4 mm (2.10") maximum body diameter
OUTPUT CONNECTORS: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case Payment Only accepts payments for eBay orders through PayPal. Shipping Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries.With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide.You can track your package with the tracking code provided.If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a damage report to be completed. Returns All Sales are final for our eBay store, If you need additional picture and information, feel free to contact us.This item is returnable only if defective OR unopened or unused. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | AUDIO-TECHNICA |
| Model: | AT4047MP | MPN: | 4961310108724 |
| UPC: | Does not apply |
Description Three switchable polar patterns: cardioid, omnidirectional, figure-of-eight
Engineered to meet the critical acoustic requirements of professional recording, broadcast and sound reinforcement
Transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
Exceptionally low self-noise, wide dynamic range and high SPL capability
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Vintage silver-matte finish on microphone and shock mount
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
Custom shock mount provides superior isolation
Integral 80 Hz high-pass filter switch and 10 dB pad switch
Certified by the METAlliance (Music Engineering and Technology Alliance)ELEMENT: Externally-polarized (DC bias) condenser
POLAR PATTERNS: Cardioid,
Omnidirectional,
Figure-of-eight
FREQUENCY RESPONSE: 20-18,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: -42 dB (7.9 mV), re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 155 dB SPL, 1 kHz at 1% T.H.D.;
165 dB SPL, with 10 dB pad (nominal)
NOISE: 14 dB
DYNAMIC RANGE (typical): 141 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 3.4 mA typical
SWITCHES: Polar selection;
Flat, roll-off;
10 dB pad (nominal)
WEIGHT: 524 g (18.5 oz)
DIMENSIONS: 188.0 mm (7.40") long,
53.4 mm (2.10") maximum body diameter
OUTPUT CONNECTORS: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case Payment Only accepts payments for eBay orders through PayPal. Shipping Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries.With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide.You can track your package with the tracking code provided.If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a damage report to be completed. Returns All Sales are final for our eBay store, If you need additional picture and information, feel free to contact us.This item is returnable only if defective OR unopened or unused. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.
Engineered to meet the critical acoustic requirements of professional recording, broadcast and sound reinforcement
Transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
Exceptionally low self-noise, wide dynamic range and high SPL capability
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Vintage silver-matte finish on microphone and shock mount
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
Custom shock mount provides superior isolation
Integral 80 Hz high-pass filter switch and 10 dB pad switch
Certified by the METAlliance (Music Engineering and Technology Alliance)ELEMENT: Externally-polarized (DC bias) condenser
POLAR PATTERNS: Cardioid,
Omnidirectional,
Figure-of-eight
FREQUENCY RESPONSE: 20-18,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: -42 dB (7.9 mV), re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 155 dB SPL, 1 kHz at 1% T.H.D.;
165 dB SPL, with 10 dB pad (nominal)
NOISE: 14 dB
DYNAMIC RANGE (typical): 141 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 3.4 mA typical
SWITCHES: Polar selection;
Flat, roll-off;
10 dB pad (nominal)
WEIGHT: 524 g (18.5 oz)
DIMENSIONS: 188.0 mm (7.40") long,
53.4 mm (2.10") maximum body diameter
OUTPUT CONNECTORS: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case Payment Only accepts payments for eBay orders through PayPal. Shipping Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries.With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide.You can track your package with the tracking code provided.If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a damage report to be completed. Returns All Sales are final for our eBay store, If you need additional picture and information, feel free to contact us.This item is returnable only if defective OR unopened or unused. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.