Back to the main page Back to category Audio or MIDI Interfaces
musical instrument details
Apogee Element 88 Thunderbolt Audio Interface New JRR Shop
Estimated price for orientation: 1 495 $
Category: Audio or MIDI Interfaces
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Apogee MPN: element88 Model: element88 UPC: Does Not Apply
Products from Apogee normally ship in 2-3 days. Please be aware of this delay before ordering. JRR Shop accepts returns for exchange or money back. There is no restocking fee on exchanges but there is a 15% restocking fee on money back. If you receive a defective unit, we will send you a new replacement for it with no restocking fee. JRR Shop adds a signature requirement to all orders. Please message us immediately if you wish to remove the signature requirement from your order.
Please note, that once the order has been shipped we cannot remove the signature requirement. Apogee Elemenet 88 Element 88 offers the best sound quality of any 8 IN x 8 OUT audio interface under $1,500. Ideal for the producer, engineer or musician, Element 88 gives you all the I/O you need to record drums or a full band.
Highlights
16 IN x 16 OUT Audio I/O box
AD/DA conversion for recording up to 192kHz/24-bit
8 analog inputs with world-class mic preamps and selectable 48v phantom power for connecting microphones, instruments or line-level devices4 combination inputs
4 XLR inputs
8 analog outputs2 balanced L/R XLR outputs
2 balanced 1/4” outputs
2 1/4” stereo headphone outputs
Single port Thunderbolt connectivity to Mac for ultra-low latency performance
1.41ms round-trip at 96kHz with a 32 buffer setting
Optical IN: Supports ADAT, SMUX & S/PDIFADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector
Optical OUT: Supports ADAT, SMUX & S/PDIFADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector
Word Clock IN/OUT via BNC connections for syncing with other digital audio gear
Element Control Software for Mac provides all control of hardware parameters including input gain, output level and low latency monitoring
Element Control Mobile App provides wireless remote control of hardware via iPhone, iPad or iPod touch
Works with Apogee Control – Optional desktop hardware remote control (Sold separately)
Multi-Unit Thunderbolt support – Connect any two Element audio I/O boxes directly to Thunderbolt ports on your computer
Apogee’s Element 24, 46 and 88 Are Thunderbolt audio I/O boxes for Mac. The Element Series takes the best of cutting-edge Apogee gear like Symphony I/O Mk II, Ensemble Thunderbolt and Groove and puts it into simple form factors. With streamlined hardware features and advanced software control, the Element series delivers ultimate recording quality and performance at unprecedented prices.
Analog to Digital Conversion A high-quality A/D converter is critical for capturing every detail of your recordings into your computer. The Element series features some of the best Apogee A/D conversion. Recording through an Element ensures you will minimize unwanted noise and maximize the signal quality. Your tracks will sound amazing and mixing your project will be easier.
Microphone Preamps Whether you are recording powerful drums, dynamic vocals or delicate strings, you need a premium mic preamp to capture the finest details of the performance. The Element Series mic preamps feature Apogee’s Advanced Stepped Gain Architecture™. This analog circuit is designed to dynamically optimize across a gain range of 0-75dB to provide superior bandwidth and low distortion.
Digital to Analog Conversion With a high-quality D/A converter, you will hear more definition in each track and virtual instrument. This clarity makes it easier for you to make precise adjustments and achieve the ideal balance when mixing your music. When you listen to your sessions through an Element, tracks will blend more harmoniously and mixing will be easier. The high end will sound crisp and clear and the low end will be tight and well defined.
Clocking An audio interface relies on a clock source like an orchestra relies on a conductor. A digital audio clock provides a timing signal to all the parts of a digital audio system so that each part of the AD/DA process may be synchronized. Element has its own built-in clock source and provides professional Word Clock IN and OUT for syncing with other digital audio gear. Use Element as the master clock to take advantage of Apogee’s superior built-in clocking technology.
Thunderbolt Connectivity The Element Series Thunderbolt driver offers incredible low-latency performance (1.41 ms round-trip) and rock-solid stability. Apogee’s custom driver uses less of your computer’s CPU power with the help of Direct Memory Access (DMA) technology. This allows you to run more plugins and monitor through your DAW at a low buffer setting. Element’s low latency driver means you don’t have to choose between power and speed. Element 24, 46 and 88 are built to be controlled by a powerful software eco-system. With the Element series you have more control options than ever before.
With Element Control’s Essentials window, you’ll see just the hardware settings you need in a form that requires minimal screen space. Move the Essentials window under, over or to the side of your DAW window for lightning access and total control. Your workflow will be uninterrupted as you keep your focus on the computer screen.
Element Control Mobile for iOS provides you with wireless control of the hardware settings included in the Element Essentials Window. Download the iOS App for free on your iPad, iPhone or iPod touch.
Sometimes, it just feels right to have hardware control at your fingertips – we know, we pioneered this approach with Apogee Duet. With the Apogee Control hardware remote, you have 8 buttons and a control knob that you can configure to control a wide range of settings. Apogee Control Hardware Remote connects directly to your Mac using a simple USB cable. If you are using an Element with Logic Pro X you can adjust hardware input parameters directly from the Mixer view in Logic, including mic pre gain, input type selection, phase control, and more. This simplified user experience lets Logic users focus on a single session window when recording, and offers complete visibility and control of input parameters. These same input controls are also now accessible through the Logic Remote App on iPad, enabling Apogee users to wirelessly adjust their input levels and settings from anywhere in the studio. Drummers can adjust mic pres without having to get up from behind the kit, engineers can do a line check while still setting up mics, and home musicians recording themselves can switch between a microphone and directly connected instrument without having to be in front of their computers.
BUILT LIKE A BEAST. NOT LIKE A BEAUTY. Each Element is constructed with rugged steel and die-cast aluminum and contains studio quality connectors and cutting edge Apogee circuit design and components. Drop an Element anywhere and connect to premium Apogee quality and lightning fast Thunderbolt connectivity. Specification Element 88 Highlights 16 IN x 16 OUT Thunderbolt Audio I/O box AD/DA conversion for recording up to 192kHz/24-bit 8 analog inputs with world-class mic preamps and selectable 48v phantom power for connecting microphones, instruments or line-level devices 4 combination inputs 4 XLR inputs 8 analog outputs 2 balanced L/R XLR outputs 2 balanced 1/4” outputs 2 1/4” stereo headphone output Single port Thunderbolt connectivity to Mac for ultra-low latency performance 1.41ms round-trip at 96kHz with a 32 buffer setting Optical IN: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector Optical OUT: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector Word Clock IN/OUT via BNC connections for syncing with other digital audio gear Element Control Software for Mac provides all control of hardware parameters including input gain, output level and low latency monitoring Element Control Mobile App provides wireless remote control of hardware via iPhone, iPad or iPod touch Works with Apogee Control – Optional desktop hardware remote control (Sold separately) Multi-Unit Thunderbolt support – Connect any two Element audio I/O boxes directly to Thunderbolt ports on your computer Element 88 with included rack ears Weights and Dimensions 13.5” x 5.5” X 1.75” 35cm x 14cm X 4.5cm 3.5lbs 1.6kg System Requirements Mac OS: Computer: Thunderbolt-equipped Mac (iMac, Macbook Pro, Macbook Air, Mac Pro) Memory: 4 GB RAM minimum, 8 GB recommended OS: 10.10 or greater Connection: Any available Thunderbolt port* Power: DC Power supply included *Thunderbolt cable not included Compatible Software: Any Mac Core Audio compatible application Recommended apps: Logic Pro, Pro Tools, Ableton Live, GarageBand, MainStage, Final Cut, Digital Performer, Studio One, Cubase, and Nuendo In the box: Element 88 Universal Power Supply with standard 3 pin-IEC cable Rack ears and mounting screws Quick Start Guide Warranty Booklet Mic Preamps: 8 Mic preamps Gain: Up to 75 dB and advanced stepped gain circuit design Selectable 48v phantom power, Soft Limit and polarity invert EIN: 129dB (un-weighted) @ 60dB, 150Ohm input Max input level: +20dBu Input impedance: 3K Ohm A/D conversion: Max input level (+4dBu ref/Mic): +20dBu Max input level (-10dBV ref): +6dBV Input impedance: 5KOhm Freq resp 10 Hz -20Khz: > +/-0.2dB (@44.1Khz) Rel. THD + N: -110dB Dyn. Range: 119dB (A-weighted) D/A conversion: Max output level (+4dBu ref): +20dBu Max output level (-10dBV ref): +6dBV Line output impedance: 90 Ohm Freq resp 10Hz -20 Khz: > +/- 0.05dB (@44.1Khz) Rel. THD+N : -114dB Dyn Range: 123dB (A-weighted) Headphone Max output level: 560mW into 30 Ohm 90mW into 600 Ohm Headphone THD+N: -107 dB with 600 Ohm load @ 19 dBu Headphone Dyn Range: 117dB a-weighted
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Apogee |
| MPN: | element88 | Model: | element88 |
| UPC: | Does Not Apply |
Please note, that once the order has been shipped we cannot remove the signature requirement. Apogee Elemenet 88
Element 88 offers the best sound quality of any 8 IN x 8 OUT audio interface under $1,500. Ideal for the producer, engineer or musician, Element 88 gives you all the I/O you need to record drums or a full band.
Highlights
16 IN x 16 OUT Audio I/O box
AD/DA conversion for recording up to 192kHz/24-bit
8 analog inputs with world-class mic preamps and selectable 48v phantom power for connecting microphones, instruments or line-level devices4 combination inputs
4 XLR inputs
8 analog outputs2 balanced L/R XLR outputs
2 balanced 1/4” outputs
2 1/4” stereo headphone outputs
Single port Thunderbolt connectivity to Mac for ultra-low latency performance
1.41ms round-trip at 96kHz with a 32 buffer setting
Optical IN: Supports ADAT, SMUX & S/PDIFADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector
Optical OUT: Supports ADAT, SMUX & S/PDIFADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector
S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector
Word Clock IN/OUT via BNC connections for syncing with other digital audio gear
Element Control Software for Mac provides all control of hardware parameters including input gain, output level and low latency monitoring
Element Control Mobile App provides wireless remote control of hardware via iPhone, iPad or iPod touch
Works with Apogee Control – Optional desktop hardware remote control (Sold separately)
Multi-Unit Thunderbolt support – Connect any two Element audio I/O boxes directly to Thunderbolt ports on your computer
Analog to Digital Conversion A high-quality A/D converter is critical for capturing every detail of your recordings into your computer. The Element series features some of the best Apogee A/D conversion. Recording through an Element ensures you will minimize unwanted noise and maximize the signal quality. Your tracks will sound amazing and mixing your project will be easier.
Microphone Preamps Whether you are recording powerful drums, dynamic vocals or delicate strings, you need a premium mic preamp to capture the finest details of the performance. The Element Series mic preamps feature Apogee’s Advanced Stepped Gain Architecture™. This analog circuit is designed to dynamically optimize across a gain range of 0-75dB to provide superior bandwidth and low distortion.
Digital to Analog Conversion With a high-quality D/A converter, you will hear more definition in each track and virtual instrument. This clarity makes it easier for you to make precise adjustments and achieve the ideal balance when mixing your music. When you listen to your sessions through an Element, tracks will blend more harmoniously and mixing will be easier. The high end will sound crisp and clear and the low end will be tight and well defined.
Clocking An audio interface relies on a clock source like an orchestra relies on a conductor. A digital audio clock provides a timing signal to all the parts of a digital audio system so that each part of the AD/DA process may be synchronized. Element has its own built-in clock source and provides professional Word Clock IN and OUT for syncing with other digital audio gear. Use Element as the master clock to take advantage of Apogee’s superior built-in clocking technology.
Thunderbolt Connectivity The Element Series Thunderbolt driver offers incredible low-latency performance (1.41 ms round-trip) and rock-solid stability. Apogee’s custom driver uses less of your computer’s CPU power with the help of Direct Memory Access (DMA) technology. This allows you to run more plugins and monitor through your DAW at a low buffer setting. Element’s low latency driver means you don’t have to choose between power and speed.
Element 24, 46 and 88 are built to be controlled by a powerful software eco-system. With the Element series you have more control options than ever before.
With Element Control’s Essentials window, you’ll see just the hardware settings you need in a form that requires minimal screen space. Move the Essentials window under, over or to the side of your DAW window for lightning access and total control. Your workflow will be uninterrupted as you keep your focus on the computer screen.
Element Control Mobile for iOS provides you with wireless control of the hardware settings included in the Element Essentials Window. Download the iOS App for free on your iPad, iPhone or iPod touch.
Sometimes, it just feels right to have hardware control at your fingertips – we know, we pioneered this approach with Apogee Duet. With the Apogee Control hardware remote, you have 8 buttons and a control knob that you can configure to control a wide range of settings. Apogee Control Hardware Remote connects directly to your Mac using a simple USB cable. If you are using an Element with Logic Pro X you can adjust hardware input parameters directly from the Mixer view in Logic, including mic pre gain, input type selection, phase control, and more. This simplified user experience lets Logic users focus on a single session window when recording, and offers complete visibility and control of input parameters. These same input controls are also now accessible through the Logic Remote App on iPad, enabling Apogee users to wirelessly adjust their input levels and settings from anywhere in the studio. Drummers can adjust mic pres without having to get up from behind the kit, engineers can do a line check while still setting up mics, and home musicians recording themselves can switch between a microphone and directly connected instrument without having to be in front of their computers.
BUILT LIKE A BEAST. NOT LIKE A BEAUTY.
Each Element is constructed with rugged steel and die-cast aluminum and contains studio quality connectors and cutting edge Apogee circuit design and components. Drop an Element anywhere and connect to premium Apogee quality and lightning fast Thunderbolt connectivity. Specification
Element 88 Highlights 16 IN x 16 OUT Thunderbolt Audio I/O box AD/DA conversion for recording up to 192kHz/24-bit 8 analog inputs with world-class mic preamps and selectable 48v phantom power for connecting microphones, instruments or line-level devices 4 combination inputs 4 XLR inputs 8 analog outputs 2 balanced L/R XLR outputs 2 balanced 1/4” outputs 2 1/4” stereo headphone output Single port Thunderbolt connectivity to Mac for ultra-low latency performance 1.41ms round-trip at 96kHz with a 32 buffer setting Optical IN: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector Optical OUT: Supports ADAT, SMUX & S/PDIF ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector SMUX: 4 channels 88.2-96 kHz on 1 Toslink connector S/PDIF: 2 channels, up to 192 kHz on 1 Toslink connector Word Clock IN/OUT via BNC connections for syncing with other digital audio gear Element Control Software for Mac provides all control of hardware parameters including input gain, output level and low latency monitoring Element Control Mobile App provides wireless remote control of hardware via iPhone, iPad or iPod touch Works with Apogee Control – Optional desktop hardware remote control (Sold separately) Multi-Unit Thunderbolt support – Connect any two Element audio I/O boxes directly to Thunderbolt ports on your computer Element 88 with included rack ears Weights and Dimensions 13.5” x 5.5” X 1.75” 35cm x 14cm X 4.5cm 3.5lbs 1.6kg
System Requirements Mac OS: Computer: Thunderbolt-equipped Mac (iMac, Macbook Pro, Macbook Air, Mac Pro) Memory: 4 GB RAM minimum, 8 GB recommended OS: 10.10 or greater Connection: Any available Thunderbolt port* Power: DC Power supply included *Thunderbolt cable not included Compatible Software: Any Mac Core Audio compatible application Recommended apps: Logic Pro, Pro Tools, Ableton Live, GarageBand, MainStage, Final Cut, Digital Performer, Studio One, Cubase, and Nuendo In the box: Element 88 Universal Power Supply with standard 3 pin-IEC cable Rack ears and mounting screws Quick Start Guide Warranty Booklet Mic Preamps: 8 Mic preamps Gain: Up to 75 dB and advanced stepped gain circuit design Selectable 48v phantom power, Soft Limit and polarity invert EIN: 129dB (un-weighted) @ 60dB, 150Ohm input Max input level: +20dBu Input impedance: 3K Ohm A/D conversion: Max input level (+4dBu ref/Mic): +20dBu Max input level (-10dBV ref): +6dBV Input impedance: 5KOhm Freq resp 10 Hz -20Khz: > +/-0.2dB (@44.1Khz) Rel. THD + N: -110dB Dyn. Range: 119dB (A-weighted) D/A conversion: Max output level (+4dBu ref): +20dBu Max output level (-10dBV ref): +6dBV Line output impedance: 90 Ohm Freq resp 10Hz -20 Khz: > +/- 0.05dB (@44.1Khz) Rel. THD+N : -114dB Dyn Range: 123dB (A-weighted) Headphone Max output level: 560mW into 30 Ohm 90mW into 600 Ohm Headphone THD+N: -107 dB with 600 Ohm load @ 19 dBu Headphone Dyn Range: 117dB a-weighted