Back to the main page Back to category Synthesizers
musical instrument details
Analogue Systems RS-450 CV RECORDER SEQUENCER Eurorack Modular Synthesizer
Estimated price for orientation: 580 $
Category: Synthesizers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
THE ITEM WILL BE SENT FROM PERU NOT THE UK AS I MOVED HERE NOW. EXCELLENT SERVICE NEVER LOST A PACKAGE. MODULE IS IN PERFECT WORKING ORDER!. AT THE LEFT ON THE PANEL IT HAS A LIGHT SCRATCH THAT YOU CAN SEE IN THE PICTURES, NOTHING BAD, AND SOME BITS OF THE LEGENDING IS VANISHED AS MOST ANALOGUE SYSTEMS MODULES ; HENCE THE EXTREMELY REDUCED PRICE , ( if you prefer you can buy it brand new here at that price: https://www.bigcitymusic.com/collections/analogue-systems/products/rs450-cv-recorder ) ------PLEASE FIND MORE INFO HERE: https://www.bigcitymusic.com/collections/analogue-systems/products/rs450-cv-recorder --------------------------------
Overview. The RS-450 is a multifunctional module for multi-channel recording of voltages, gates and trigger from external sources. This voltage sequences can be recorded in 10 memories and can be recalled at any time for live use. As the sampling frequency iof the RS-450 is high and the internal SD card is large enough it is also possible to record audio signals as well, just like with a sampler. Details: Recording CVs, gates and trigger on four channels with a sapling frequency up to 14kHz i.e. audio recordings are possible too. Module can be used as a sequencer as well because it has clock in- and outputs and parameters for sequence start and end points. It can be played in realtime or in step time mode. Different playback possibilities like forward, backward, bi-directional as well as single, repeat, and hold modes. The functions start, stop, record and rest/reset can be activated manually and with CVs as well. miscellaneous IMPORTANT:
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2,5 mm) when mounting an Analogue Systems module by the side of an Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer. The RS-450 is the only Analogue Systems module so far with an additional connector for Eurorack flat ribbon cables. It requires a ribbon cable with 16 pin headers on both ends. Please watch polarity! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping! connectors CV inputs for start- and end point of the sequence and the sampling frequency
per channel of the CV recorder there´s a CV input and output
clock in, clock out
transpose input
Gate inputs for the transport functions start, stop, record and rest/reset dimensions 3U Eurorack module, 36HP wide (see info above). 78mm deep Current draw not known yet but probably it's high due the digital circuitry
Module requires an powerful +5V voltage like from Make Noise's 5V adaptor or Mutable Instruments Volts.--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------- I´LL COMBINE SHIPPING COST IF YOU BUY MORE MODULES!!! Check my other items for more modular , I'LL COMBINE SHIPPING COST. --------------------------------------- , i'll combine shipping cost for multiple items Please ask questions. - Do not pay immediately after winning , the shipping cost in the list is referencial only as every country has it's own cost that i can calculate in the Serpost website so please make questions. Check my feedback and bid with confidence , I've been selling gear at Ebay UK since 2002 and have a lot of experience in shipping gear.DO NOT PAY IMMEDIATELY AFTER WINNING THE ITEM , THE POSTAGE COST SHOWN IN THIS LIST IS ONLY A REFERENCE ( IT"S FOR SENDING TO GERMANY AS EXAMPLE) EVERY COUNTRY HAS A DIFFERENT COST PLEASE ASK THE COST FOR YOUR COUNTRY Thanks for reading and good luck
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition |
THE ITEM WILL BE SENT FROM PERU NOT THE UK AS I MOVED HERE NOW. EXCELLENT SERVICE NEVER LOST A PACKAGE. MODULE IS IN PERFECT WORKING ORDER!. AT THE LEFT ON THE PANEL IT HAS A LIGHT SCRATCH THAT YOU CAN SEE IN THE PICTURES, NOTHING BAD, AND SOME BITS OF THE LEGENDING IS VANISHED AS MOST ANALOGUE SYSTEMS MODULES ; HENCE THE EXTREMELY REDUCED PRICE , ( if you prefer you can buy it brand new here at that price: https://www.bigcitymusic.com/collections/analogue-systems/products/rs450-cv-recorder ) ------PLEASE FIND MORE INFO HERE: https://www.bigcitymusic.com/collections/analogue-systems/products/rs450-cv-recorder --------------------------------
Overview.
Details: The RS-450 is a multifunctional module for multi-channel recording of voltages, gates and trigger from external sources. This voltage sequences can be recorded in 10 memories and can be recalled at any time for live use. As the sampling frequency iof the RS-450 is high and the internal SD card is large enough it is also possible to record audio signals as well, just like with a sampler.
Recording CVs, gates and trigger on four channels with a sapling frequency up to 14kHz i.e. audio recordings are possible too. Module can be used as a sequencer as well because it has clock in- and outputs and parameters for sequence start and end points. It can be played in realtime or in step time mode. Different playback possibilities like forward, backward, bi-directional as well as single, repeat, and hold modes. The functions start, stop, record and rest/reset can be activated manually and with CVs as well.
miscellaneous
IMPORTANT:
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2,5 mm) when mounting an Analogue Systems module by the side of an Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer. The RS-450 is the only Analogue Systems module so far with an additional connector for Eurorack flat ribbon cables. It requires a ribbon cable with 16 pin headers on both ends. Please watch polarity! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
Because of the different position of the mounting holes there will be a gap of 0.5HP (= 2,5 mm) when mounting an Analogue Systems module by the side of an Eurorack module. Take this into consideration when planning your system. Gaps can be covered with 1.5HP wide blank panels by Doepfer. The RS-450 is the only Analogue Systems module so far with an additional connector for Eurorack flat ribbon cables. It requires a ribbon cable with 16 pin headers on both ends. Please watch polarity! If the module is plugged in incorrectly and therefore damaged the customer has to bear any costs for repair and shipping!
connectors
CV inputs for start- and end point of the sequence and the sampling frequency
per channel of the CV recorder there´s a CV input and output
clock in, clock out
transpose input
Gate inputs for the transport functions start, stop, record and rest/reset
per channel of the CV recorder there´s a CV input and output
clock in, clock out
transpose input
Gate inputs for the transport functions start, stop, record and rest/reset
dimensions
------------------- I´LL COMBINE SHIPPING COST IF YOU BUY MORE MODULES!!! Check my other items for more modular , I'LL COMBINE SHIPPING COST. --------------------------------------- , i'll combine shipping cost for multiple items Please ask questions. - Do not pay immediately after winning , the shipping cost in the list is referencial only as every country has it's own cost that i can calculate in the Serpost website so please make questions. Check my feedback and bid with confidence , I've been selling gear at Ebay UK since 2002 and have a lot of experience in shipping gear.DO NOT PAY IMMEDIATELY AFTER WINNING THE ITEM , THE POSTAGE COST SHOWN IN THIS LIST IS ONLY A REFERENCE ( IT"S FOR SENDING TO GERMANY AS EXAMPLE) EVERY COUNTRY HAS A DIFFERENT COST PLEASE ASK THE COST FOR YOUR COUNTRY Thanks for reading and good luck 3U Eurorack module, 36HP wide (see info above). 78mm deep Current draw not known yet but probably it's high due the digital circuitry
Module requires an powerful +5V voltage like from Make Noise's 5V adaptor or Mutable Instruments Volts.--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Module requires an powerful +5V voltage like from Make Noise's 5V adaptor or Mutable Instruments Volts.--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------