Description This listing is for a BRAND NEW KORG MS-20M Kit + SQ-1.
Condition: Brand New
Comes with the 100 - 240V Universal Adapter.
The evolution of the MS-20, delivering even more powerful synthesis.
A module that you assemble, with a step sequencer included.
The classic MS-20 analog synthesizer that appeared in 1978 has been reborn as a perfect reproduction of the original circuit, first in 2013 as the mini-sized MS-20 mini, and now in 2014 as the MS-20 Kit that you can assemble yourself.The MS-20 Mini and the Kit were designed by the engineers who developed the original MS-20. At its introduction, the designers of the MS-20 wanted to create an interesting product quickly; the result was an enormous hit, but the designers felt there were actually a few things left undone. Now, after 37 years, the user-assembled MS-20M Kit has been completed.The MS-20M Kit is based on the MS-20 with additional improvements; it's an analog synthesizer module where you can choose your preferences and assemble yourself. In addition to greatly enhanced synthesis possibilities provided by oscillator sync, FM, two filters (pre and post), and PWM, there are jacks such as a CV IN that supports both Hz/V and V/Oct, making it play nicely with other equipment. You'll be able to immerse yourself in synthesis, and with the inclusion of the SQ-1 step sequencer you can also create and play sequences.Significantly powered-up synthesis
- SYNC ON/OFF switch allows oscillator sync
- FM ON/OFF switch allows frequency modulation
- FILTER TYPE switch selects two filter types
- PWM IN jack allows pulse width modulation
- EG2 NORMAL OUT expands your sonic possibilities
- TRIG SW button is a convenient way to audition the soundPlentiful connectors to control the sound from various devices
- Supports all CV/GATE specifications: Hz/V and V/Oct, S-Trig and V-Trig
- Three JUNCTION jacks
- MIDI IN connector and USB MIDI connector User-assembled kit with luxurious side panelsSQ-1 step sequencer included Dramatically powered-up synthesisCarrying on the distinctive synthesis of the MS-20, the MS-20M features additional improvements in both looks and functionality. Extending to detailed aspects of the design, the sound-creating possibilities have been dramatically boosted, making this sound module even more attractive and raising it to an even higher state of completion. - SYNC ON/OFF switch allows oscillator sync
 Oscillator sync forcibly synchronizes the phase of VCO1 to the phase of VCO2, producing a powerful sound with complex overtones. - FM ON/OFF switch allows frequency modulation
 The VCO1 waveform can be used to frequency-modulate the VCO2 waveform (FM or cross modulation), creating vibrato effects or extreme metallic sounds. - FILTER TYPE switch lets you select two types of filter
 The original MS-20 used two different VCF circuits depending on the date of production, and now you can choose either of these with a single switch. The earlier model (REV.1) has an aggressive character with distinctive distortion and self-oscillation, while the later model (REV.2) has minimal noise and a sweet, mellow sound.  - PWM IN jack allows pulse width modulation
The PWM provided on the MS-10 of the past is now possible on the MS-20. By cyclically modulating the pulse width of the VCO1 square wave, you can obtain a distinctively fat sound.- EG2 NORMAL OUT jack expands your sound-creating potential
In addition to the previous EG2 REV OUT, we've provided a normal EG2 OUT that varies in the range of 0V--+5V.- TRIG SW button lets you conveniently audition the sound
Even on this keyboardless unit, the trigger switch lets you smoothly audition the sound while you edit the parameters.A rich array of jacks to control a variety of devicesNumerous jacks have been added to the MS-20M, letting you connect it with any type of device.- All CV/GATE specifications are supported: Hz/V and V/Oct, S-Trig and V-Trig
From the time when it was originally produced, the CV standard used by the MS-20 was not the commonly used V/Oct standard, but rather the Hz/V standard that provided superior pitch stability. However, like the MS-50 of that time, the MS-20M Kit provides CV IN jacks for both the Hz/V standard and the V/Oct standard.For the TRIG IN jack that receives gate signals, jacks are provided not only for the S-Trig standard as on the original MS-20, but also for the widely used V-Trig standard. The MS-20M Kit supports any sequencer or controller that's equipped with CV/GATE output.- Three JUNCTION jacks
Three sets of the junction jacks once provided by the MS-50 are also provided. Output signals from the SQ-1 step sequencer or similar device can be converted from a mini-phone plug to a 1/4" phone plug, or those signals can be distributed to multiple destinations for a variety of possibilities.- MIDI IN connector and USB connector
There's a MIDI IN connector that can receive note messages, and a USB-MIDI connector that can transmit and receive note messages. You can perform using a taktile or other MIDI keyboard, or perform sequences that you've recorded on your DAW.User-assembled kit with luxurious wooden side panels
The full-sized body supports 1/4" plugs and projects an aura of solidity. The side panels are luxurious wood, giving this unit some serious presence on your desk.The MS-20M is a user-assembled kit. There is no need for any tricky soldering or knowledge of electronic circuits. Just by installing screws and fitting parts together, you'll get your very own analog sound.SQ-1 step sequencer is includedThe 2 x 8 step SQ-1 step sequencer is included. From the day you assemble the unit, you'll be able to immerse yourself in a limitless world of synthesis and sequencing.MS-20M Kit Main Specifications
Connectors
     Signal IN jack (1/4" phone jack), Signal OUT jack (1/4" phone jack, 2Vp-p output impedance 3.5kΩ), PHONES jack (1/4" Stereo phone jack, 33Ω 48mW), DC12V jack, MIDI IN, USB type BPower Supply
    DC12VDimensions (W) x (D) x (H)
     587 mm x 215 mm x 104 mm /23.11" x 8.47" x 4.09"Weight
     4 kg / 8.82 lbs.Accessories
     Ten ø6.3 mm patch cables, three ø3.5 mm, patch cables, AC adapter (12V)Specifications in details Control Section1. Voltage Controlled Oscillator 1(VCO 1)
     :Scale (32', 16', 8', 4') (6 octaves, +cent, -cent)
:Wave form(Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
:Pulse width adjust 1:1 ～ 1:infinity
     
2. Voltage Controlled Oscillator 2(VCO 2)
     :Scale (16', 8', 4', 2') (6 octaves, +cent, -cent)
:Wave form(Sawtooth, Square, Pulse, Ring modulator) (4 modes)
:Pitch(± 2 octave)3. VCO Master control : Master tune(± 100cent)
     :Portamento(max. 10sec)
:Frequency modulation intensity by MG/T.EXT(-5V ～ +5V)
:Frequency modulation intensity by EG1/EXT(-5V ～ 0V)
     
4. VCO Mixer
     :VCO 1 Level
     :VCO 2 Level5. Sync
     :On/Off Slid SW(VCO1-->VCO2)6. FM
     :On/Off Slid SW(VCO1-->VCO2)7. Voltage Controlled High Pass Filter (VCF HPF)
     :Cutoff frequency(50Hz ～ 15,000Hz)
     :Peak(flat ～ self OSC)
     :Cutoff frequency modulation intensity by MG/T.EXT(-5V ～ +5V)
     :Cutoff frequency modulation intensity by EG2/EXT(-5V ～ +5V)
     
8. Voltage Controlled Low Pass Filter (VCF LPF)
     :Cutoff frequency(50Hz ～ 15,000Hz)
     :Peak(flat ～ self OSC)
     :Cutoff frequency modulation intensity by MG/T.EXT(-5V ～ +5V)
     :Cutoff frequency modulation intensity by EG2/EXT(-5V ～ +5V)
     
9. Filter Type
     :Select Slide SW(REV.1 / REV.2)10. Envelope Generator 1
     :Delay time(10sec)
     :Attack time(10sec)
     :Release time(10sec)
     
11. Envelope Generator 2
     :Hold time(20sec)
     :Attack time(10sec)
     :Decay time(10sec)
     :Sustain level(0V ～ 5V)
     :Release time(10sec)
     
12. Modulation Generator (LFO)
     : Wave form(Negative Sawtooth ～ Triangle ～ Positive Sawtooth, Wide Pulse ～ Square ～ Narrow Pulse)
     : Frequency(0.1Hz ～ 20Hz)
     
13. Power switch and Volume
     :Volume14. Indicator
     :LED(Power On, EG1+EG2 trigger, Modulation Generator rate))External Signal Processor1. Control section
     : Input signal level
     : Low cut frequency(50Hz ～ 2,500Hz)
     : High cut frequency(100Hz ～ 5,000Hz)
     : CV adjust
     : Threshold level
     
2. Input and Output
     : Signal In
     : Amplifier Out
     : Band pass filter Out
     : CV Out(0 ～ +8.4V)
     : ENV Out(0 ～ +5V)
     : Trig Out(+5V-->GND)
     
3. Indicator(LED)
     : Peak indicator
     : Trigger indicator
     Patch Panel1. CV IN(Hz/V)
     :VCO 1 + VCO 2 control voltage input(Hz/V 0 ～ +8V)2. CV IN(V/Oct)
     :VCO 1 + VCO 2 control voltage input(V/Oct 0 ～ +5V)
     
3. CV OUT
     :VCO control voltage output(Hz/V) (0 ～ +8V Caution: only MIDI IN)
     
4. TRIG OUT
     :Trigger output(+5V-->GND Caution: only MIDI IN)
     
5. VCO
     :VCO 1 + VCO 2 external frequency control input(V/Oct -5V ～ +5V)
     
6. PWM IN
     :PWM for VCO 1 PW-Square
     
7. VCF
     :External signal input(3Vp-p max.)
:External High pass filter cutoff frequency control input(2OCT/V)(-5V ～ +5V)
:External Low pass filter cutoff frequency control input(2OCT/V)(-5V ～ +5V)
     
8. VCO + VCF
     : Total external modulation input(T.EXT)(-5V - +5V)
     
9. VCA
     : External initial gain control input(0 - +5V)
     
10. EG
     :EG 1 envelope signal normal output(0V 〜 +5V)
     :EG 1 envelope signal reverse output(+5V ～ 0V)
     :EG 1 + EG 2 trigger input(GND-->+5V ～ +15V)
     :EG 1 + EG 2 trigger input(-->GND)
     :EG 1 trigger input(-->GND)
     :EG 2 envelope signal normal output(0V ～ +5V)
     :EG 2 envelope signal reverse output(+5V ～ -5V Caution: Sustain Level=0V)
     
11. MG
     : Triangle output(Negative Sawtooth - Triangle - Positive Sawtooth)(5Vp-p)
     : Rectangle output(Wide Pulse - Square - Narrow Pulse)(0 - +5V)
     
12. Noise Generator
     : Pink noise output(5Vp-p)
     : White noise output(5Vp-p)
     
13. Sample and Hold
     : Clock trigger input(-->GND)
     : Sample signal input(5Vp-p max.)
     : S/H output(5Vp-p max.)
     
14. Modulation VCA
     : Control voltage input(0 - +5V)
     : Signal input(-5V - +5V)
     : Signal output(-5V - +5V)
     
15. TRIG SW
     :SW On-->TRIG IN(-->GND)16. TRIG SW OUT
     :Switch output(-->GND)17. JUNCTION
     :3 x (1 x 3.5mm Stereo mini Phone Jack + 3 x 6.3mm Stereo Phone Jack)
     Connectors1. Signal In
     : Monaural phone jack2. Signal out
     : Monaural phone jack
     : Maximum Output Level 2Vp-p
     : Output Impedance 3.5kΩ
     
3. Head phones out
     :Stereo phone jack
     :Maximum Output Level 48mW (33Ω)
     :Output Impedance 10Ω
     
4. MIDI
     ：MIDI Input
     * Only note messages (velocity is not used) can be received
     * MIDI CH (1 - 16) can be changed
     
5. USB
     :Type B, USB-MIDI Input/Output
     * Only note messages (velocity is not used) can be transmitted and received
     * MIDI CH (1 - 16) can be changed
     
SQ-1 Specifications
Sequencer Mode
     ALTERNATE、ORDER、PARALLEL TURN、PARALLEL ORDER、CV/DUTY、CV/SLIDE、CV/DUTY | RANDOM、RANDOMStep Mode
     GATE ON/OFF、ACTIVE STEP、SLIDE、STEP JUMP
     
Sequence Step Resolution
     quarter notes, eighth notes, sixteenth notes
     
CV OUT Pitch
     Linear, Minor, Major, Chromatic
     
CV OUT Voltage
     1V, 2V, 5V (Oct) 8V (/V)
     
GATE OUT Polarity
     + (positive polarity), - (negative polarity)
     
SYNC IN/OUT Polarity
    + (rise), - (fall)
     
Connectors
     - littleBits OUT jack (mini monaural phone jack)
     - OUT (MIDI OUT) jack (mini stereo phone jack)
     - CV - A OUT - GATE jack (mini monaural phone jack, CV OUT : Output level 1V, 2V, 5V, 8[Hz/V], GATE OUT: output level 10V)
     - CV - BOUT - GATE jack (mini monaural phone jack, CV OUT : Output level 1V, 2V, 5V, 8[Hz/V], GATE OUT: output level 10V)
     - IN – SYNC – OUT jack (mini monaural phone jack, SYNC IN: Max input level 20V, SYNC OUT: Output level 5V)
     - USB jack (type B, USB MIDI)
     
Power Supply
     Two AA batteries (alkaline batteries recommended), or USB power
     
Battery Life
     approximately 5 hours (when using alkaline batteries)
     
Dimension (W x D x H)
     93 x 84 x 63 mm/7.60" x 3.31" × 2.48"
     
Weight
     641 g/1.41 lbs.
     
Accessories
    Two AA batteries for checking operation, mini plug – DIN cable
     
Options
     Patch cable MS-CABLE-18
     
  Payment We Accept PayPal Only.
Please send the Payment to us within 5 days after the Auction Ends. Shipping EMS shipment with Insurance and Tracking number (Japan Postal Service)Asia: $100
Oceania, Middle East: $134
North America: $134
Europe: $153
South America: $260
International Buyers - Please Note:  Import duties, taxes and charges are not included in the item price or shipping charges.
These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Thanks for checking out our listing.
Please check out the pictures above in order to see the product in detail.
Questions welcomed!