Back to the main page Back to category Speakers and Monitors
musical instrument details
Aviom AN-16/i-M Mic Input Module
Estimated price for orientation: 2 520 $
Category: Speakers and Monitors
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: aviom Model: AN16/i-M
AVIOM AN16/i-M Features -Sixteen high quality mic preamplifiers, with 24-bit A-to-D converters -48-volt phantom power on each channel -XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks -Continuously variable gain, phase reverse, and 85Hz rolloff per channel -Built-in passive mic splitter -Balanced insert send and return jacks (1/4-inch TRS) The AN-16/i-M Mic Input Module is a 16-channel Pro16 input device with sixteen high-quality mic preamps and 24-bit A-to-D converters. It’s a great front end for a personal monitor mixing system when you need to plug your mic- and line-level input sources into the input module first and then continue on to the mixing console using its built-in splitter. To create a digital snake, connect the AN-16/i-M to a Pro16 output device like the AN-16/o v.4 Output Module. Technical Specifications Audio Inputs 16, balanced mic- or line-level, XLR combo connector XLR Input (mic/line) Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio - TRS Line Inputs, & Send/Return Tip: Audio +; Ring: Audio -; Sleeve: Ground Audio Thru XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -Direct coupled passive throughput Insert Send Impedance balanced; Nominal level: 0dBu; Peak Level (A/D clip point): +14dBuThe Insert Send connector is a line output in the signal path post gain, post filter, and post phase controls. Insert Return TRS balanced; Nominal level: 0dBu; Peak Level (A/D clip point): +14dBu The Insert Return connector is a line input to the signal path that is pre A/D conversion. Analog to Digital Conversion: 48kHz sample rate, 24 bit Operating Level: +4dBu Frequency Response: 4Hz-22kHz A-Net Output One Category 5 (RJ45 connector) A-Net Expansion: One Category 5 (RJ45 connector) Gain Range Mic: +6dB to +60dB; Line: -15dB to +36dB Channel LED Indicators: Signal Present and Clip, per channel Line Inputs Impedance: 48k ohms Metering LEDs; green: Signal Present, red: Clip; per channel Stereo Operation Stereo Link, per channel pair; Two-position switch (Normal, Link) Maximum Input Level Mic: +14dBu; Line: +28dBu Input Impedance Mic: 2.4k ohms; Line (TRS): 33k ohms; Insert Return: 39k ohms A/D Freq. Response -0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured from Mic or Line in) -3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Mic or Line in) THD +N < 0.003% Crosstalk: -90dB Bit Error Rate (BER) 10(-12) Signal to Noise (unweighted) A/D: -105dB Reference = +14dBu (A/D clip point) Send jack: -113dB (Gain = minimum) EIN (Equivalent Input Noise) -128dBu = (Rs = 150 ohms, 20kHz BW, Gain = +60dB) CMRR (Common Mode Rejection Ratio) 80dB @120Hz (Gain = +60dB) Low Cut Filter: -3dB @ 85Hz, -18 dB per octave Phantom Power: +48 volts, per channel, switch with LED Digital Outputs: A-Net: 2 (Main and Aux); A-Net Expansion: 1 Pro16 A-Net A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable uses unshielded Cat-5e UTP (or better) cable Latency: <0.880 msec (measured from analog input to analog output) Power Supply Internal, universal switching type; IEC jack Voltage 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL Dimensions 19" x 9.25" (482.6 x 234.95 mm); 3U high Weight 12 lb(5.44 kg) Options SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable Buyer pays all shipping cost via UPS or FEDEX. Payment must be made via PayPal within 5 days of auction close. Thanks you for viewing our listing! We would love to assist you with all of your production needs! Our staff is knowledgeable and offers a combined 30+ years of experience specializing in all types of production. We use most of this equipment on a daily basis and would love to help you! Feel free to contact us with any questions! Also we would love to quote anything you don’t see in our eBay store. Our true passion is helping churches. We have numerous techs and engineers in churches each week serving alongside great teams. If we can help in any way, please reach out. We would love to partner with you and your congregation! Thanks again for looking!
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | aviom |
| Model: | AN16/i-M |
AVIOM AN16/i-M Features -Sixteen high quality mic preamplifiers, with 24-bit A-to-D converters -48-volt phantom power on each channel -XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks -Continuously variable gain, phase reverse, and 85Hz rolloff per channel -Built-in passive mic splitter -Balanced insert send and return jacks (1/4-inch TRS) The AN-16/i-M Mic Input Module is a 16-channel Pro16 input device with sixteen high-quality mic preamps and 24-bit A-to-D converters. It’s a great front end for a personal monitor mixing system when you need to plug your mic- and line-level input sources into the input module first and then continue on to the mixing console using its built-in splitter. To create a digital snake, connect the AN-16/i-M to a Pro16 output device like the AN-16/o v.4 Output Module. Technical Specifications Audio Inputs 16, balanced mic- or line-level, XLR combo connector XLR Input (mic/line) Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio - TRS Line Inputs, & Send/Return Tip: Audio +; Ring: Audio -; Sleeve: Ground Audio Thru XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -Direct coupled passive throughput Insert Send Impedance balanced; Nominal level: 0dBu; Peak Level (A/D clip point): +14dBuThe Insert Send connector is a line output in the signal path post gain, post filter, and post phase controls. Insert Return TRS balanced; Nominal level: 0dBu; Peak Level (A/D clip point): +14dBu The Insert Return connector is a line input to the signal path that is pre A/D conversion. Analog to Digital Conversion: 48kHz sample rate, 24 bit Operating Level: +4dBu Frequency Response: 4Hz-22kHz A-Net Output One Category 5 (RJ45 connector) A-Net Expansion: One Category 5 (RJ45 connector) Gain Range Mic: +6dB to +60dB; Line: -15dB to +36dB Channel LED Indicators: Signal Present and Clip, per channel Line Inputs Impedance: 48k ohms Metering LEDs; green: Signal Present, red: Clip; per channel Stereo Operation Stereo Link, per channel pair; Two-position switch (Normal, Link) Maximum Input Level Mic: +14dBu; Line: +28dBu Input Impedance Mic: 2.4k ohms; Line (TRS): 33k ohms; Insert Return: 39k ohms A/D Freq. Response -0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured from Mic or Line in) -3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Mic or Line in) THD +N < 0.003% Crosstalk: -90dB Bit Error Rate (BER) 10(-12) Signal to Noise (unweighted) A/D: -105dB Reference = +14dBu (A/D clip point) Send jack: -113dB (Gain = minimum) EIN (Equivalent Input Noise) -128dBu = (Rs = 150 ohms, 20kHz BW, Gain = +60dB) CMRR (Common Mode Rejection Ratio) 80dB @120Hz (Gain = +60dB) Low Cut Filter: -3dB @ 85Hz, -18 dB per octave Phantom Power: +48 volts, per channel, switch with LED Digital Outputs: A-Net: 2 (Main and Aux); A-Net Expansion: 1 Pro16 A-Net A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable uses unshielded Cat-5e UTP (or better) cable Latency: <0.880 msec (measured from analog input to analog output) Power Supply Internal, universal switching type; IEC jack Voltage 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL Dimensions 19" x 9.25" (482.6 x 234.95 mm); 3U high Weight 12 lb(5.44 kg) Options SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable Buyer pays all shipping cost via UPS or FEDEX. Payment must be made via PayPal within 5 days of auction close. Thanks you for viewing our listing! We would love to assist you with all of your production needs! Our staff is knowledgeable and offers a combined 30+ years of experience specializing in all types of production. We use most of this equipment on a daily basis and would love to help you! Feel free to contact us with any questions! Also we would love to quote anything you don’t see in our eBay store. Our true passion is helping churches. We have numerous techs and engineers in churches each week serving alongside great teams. If we can help in any way, please reach out. We would love to partner with you and your congregation! Thanks again for looking!