| | | QSC PLX3102 3100w Power Amplifier | | | This is a no hassle BUY IT NOW listing for your convenience with FREE SHIPPING in the continental United States! | | | | Brand New QSC PLX3102 with Full Factory WarrantyDual Channel Power Amplifer w/ Powerlight TechnologyRetail Price: $1319.99Includes:
(1) PLX3102 Power Amplifier | | | Click on an image to open in new window |
| | | Description | The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With high power ratings, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. The PLX3102 is the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. These models feature built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. MECHANICAL
PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.POWERLIGHT TECHNOLOGY
PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean.AUDIO QUALITY
PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality. | | | Features: | Specifications: | | Very light weight (21 lbs/9.5 kg)Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged.Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators.Speakon® NL-4 output connectors provide a positive-locking speaker connection. Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers.21-position front-panel gain controls for precise, repeatable amplifier adjustment.Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation.Patented PowerLight power supply technology with other patents pending.Speakon NL4 and binding post outputs.100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover.Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage.Switchable/defeatable clip limiters.Four models with power ratings up to 1800 watts per channel @ 2 ohms, 3600 watts bridged @ 4 ohms. | (Stereo Mode 8 ohms) FTC 20 Hz - 20 kHz 0.05% THD: 550 W(Stereo Mode 8 ohms) EIA 1 kHz 0.1% THD: 600 W(Stereo Mode 4 ohms) FTC 20 Hz - 20 kHz 0.05% THD: 900W(Stereo Mode 4 ohms) EIA 1 kHz 0.1% THD: 1000W(Stereo Mode 2 ohms) EIA 1 kHz 1% THD: 1550 WBridge Mono 8 ohms: (Bridge Mono 8 ohms) 20 Hz-20 kHz 0.1% THD: 1900 W(Bridge Mono 8 ohms) EIA 1 kHz 0.1% THD: 2100 W(Bridge Mono 4 ohms) 1 kHz 1% THD: 3100 WSignal to Noise (20 Hz - 20 kHz): -107 dBInput Sensitivity @ 8 ohms: 1.23 VrmsGain @ 8 ohms: 35 dBOutput Circuitry: 2-Tier Class HDistortion (SMPTE-IM): Less than 0.02%1/8 rated power, 20 Hz-20 kHz: Less than 0.02%Full rated power, 20 Hz-20 kHz: Less than 0.02%Frequency Response: 20 Hz-20 kHz, -0.5 dBDamping Factor: Greater than 500Input Impedance: 20k ohms balanced, 10k ohms unbalancedInput Clipping: 11 Vrms (+21 dBu)Cooling: Variable-speed fan, rear-to-front air flowInput Connectors, each channel: 3-pin XLR and 1/4" TRS balancedOutput Connectors, each channel: Neutrik NL4 Speakon and Touch-proof binding posts (Both channels available on Ch 1 NL4 output)Rear Panel Switches: Input Configuration: Bridge/Stereo/ParallelClip Limiters: Each channelFilters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic)Detented Gain Attenuator: 0 to 8 dBPower : On/OffFront Panel Indicators: Clip: Red LED, -10: Green LED, Signal (-35 dB): Green LED, Power: Blue LED, Parallel: Amber LED, Bridge Mono: Amber LEDAmplifier Protection: Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, Stable into reactive or mismatched loadsLoad Protection: On/off muting, DC-fault power supply shutdownInfrasonic: -3 dB, 5 HzDC fault: Power supply shutdownUltrasonic: -3 dB, 85 kHzShort Circuit: CutbackThermal: Muting at 90° COver Current: Active clip limiting, Power Supply cutbackHigh Line: Standard +15%, survive +25%Low Line: -33%Height: 3.5" (8.9 cm) 2 rack spacesWidth: 19" (48.3 cm)Depth, Rack mounting surface to rear panel: 12.8" (32.6cm)Overall Depth: 14.875" (37.9 cm)Weight: 21 lbs. (9.5 kg) net 26 lbs. (11.8 kg) shippingAgency Approvals: CE, FCC, cUL, ULCurrent Consumption 1/8 Power (pink noise) 8 ohms: 6A/120VCurrent Consumption 1/8 Power (pink noise) 4 ohms: 9.5A / 120VCurrent Consumption 1/8 Power (pink noise) 2 ohms: 14A / 120VCurrent Consumption 1/3 Power (pink noise) 8 ohms: 10.7A/120VCurrent Consumption 1/3 Power 4 ohms: 16.5A / 120VCurrent Consumption 1/3 Power 2 ohms: 27A / 120VCurrent Consumption Full Power 8 ohms: 21A/120VCurrent Consumption Full Power 4 ohms: 33A / 120VCurrent Consumption Full Power 2 ohms: 55A / 120V | |
| | | Return Policy:
We want you to be completely satisfied with your purchase from FP Logistics on eBay. Most unused merchandise in re-sellable condition with all original packaging and accessories may be returned for a refund within 30 days of purchase. In the event that you want to return your purchase to FP Logistics, please use the "Return this item" button from your eBay order history.Re-stocking Fees and Shipping Charges
All returns are subject to a re-stocking fee. Any shipping and handling charges are non-refundable.Partial Returns
To be eligible for a refund, all of the items included with the purchase must be returned. In the case of an incomplete return, no refund will be given. Non-Returnable Items
There are a few item types that are not eligible for return. Please refer to this specific product's return policy in the "Shipping and Payments" tab for full details. |
| 