Description Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
Independent cardioid and figure-of-eight condenser elements
Switch selection of Mid-Side mode and two internally matrixed stereo modes
Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
Integral 80 Hz high-pass filter switch and 10 dB pad switch
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
Custom shock mount provides superior isolation
Certified by the METAlliance (Music Engineering and Technology Alliance)ELEMENT: Externally-polarized (DC bias) condenser
POLAR PATTERN: Cardioid and Figure-of-eight
FREQUENCY RESPONSE: 20-18,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: Stereo 90degrees: -42 dB (7.9 mV) dB re 1V at 1 Pa
Stereo 127degrees: -41 dB (8.9 mV) dB re 1V at 1 Pa
Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa
Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
IMPEDANCE: 50 ohms
MAXIMUM INPUT SOUND LEVEL: Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal)
NOISE: Stereo 90degrees: 25 dB SPL
Stereo 127degrees: 16 dB SPL
Mid: 15 dB SPL
Side: 17 dB SPL
DYNAMIC RANGE (typical): Mid: 134 dB, 1 kHz at Max SPL
Side: 132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: Stereo 90degrees: 69 dB, 1 kHz at 1 Pa
Stereo 127degrees: 78 dB, 1 kHz at 1 Pa
Mid: 79 dB, 1 kHz at 1 Pa
Side: 77 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 6.4 mA typical (both channels total)
SWITCHES: 90degrees, 127degrees, M-S;
Flat, roll-off;
10 dB pad (nominal)
WEIGHT: 517 g (18.2 oz)
DIMENSIONS: 193.0 mm (7.60") long,
53.4 mm (2.10") maximum body diameter
OUTPUT CONNECTOR: Integral 5-pin XLRM-type
CABLE: 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case Payment Only accepts payments for eBay orders through PayPal. Shipping Your order will be shipped to you via Japan Post EMS. Japan Post is a speedy delivery service that delivers to more than 120 countries.With an effective tracking system and insurance program, EMS is able to offer a secure delivery worldwide.You can track your package with the tracking code provided.If the item was damaged, please take the damaged item along with all packaging into your local post office to assess and a damage report to be completed. Returns All Sales are final for our eBay store, If you need additional picture and information, feel free to contact us.This item is returnable only if defective OR unopened or unused. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as "gifts" -US and International government regulations prohibit such behavior.