Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Sound Devices |
Sound Devices USBPre 2 - Microphone Interface for Computer Audio RRP: 879.00 Converters 24-bit, crystal based low jitter Masterclock Sample Rates Recording: 8, 16, or 24-bit @ 8, 16, 32, 44.1, 48, 96, 192kHz Playback: 24-bit @ 8, 16, 32, 44.1, 48, 96, 192kHz Analog Input 2 x XLR Microphone 2 x 1/4" TRS phone Line 2 x RCA phono AUX Analog Output 2 x XLR Microphone/Line 2 x RCA phono AUX Digital Input 1 x TOSLink optical S/PDIF 1 x RCA coaxial S/PDIF Digital Output 1 x TOSLink optical S/PDIF 1 x RCA coaxial S/PDIF MIDI In/Out No Sync In/Out S/PDIF Maximum Input Level Mic: -10dBu Mic (15dB pad): +4dBu Line: +28dBu (19.45V rms) Aux: +9dBu (2.18V rms) Input Impedance Mic: 4kΩ, active-balanced Line: 60kΩ, active-balanced Aux: 80kΩ, active-balanced Maximum Output Level Balanced XLR: +18dBu with 100kΩ load Aux: +8dBu (2.0V rms) with 100kΩ load Headphones: +11dBu (2.75V rms) with 600Ω load Output Impedance Balanced XLR (line level): 500Ω Balanced XLR (mic level): 5Ω Aux: 660Ω Headphone Output 1 x 1/4" TRS phone 1 x 3.5mm stereo mini Phantom Power 48V through 6.8kΩ resistors Each microphone input will supply 10mA Metering 2 x 23 segments, 44dB total range, peak ballistics - 0dB on meter = 0dBFS (0dB referenced to full scale digital) THD + N 0.05% maximum (any input to PC recording, gain control at minimum, input driven to -6dBFS) 0.009% maximum (AUX output, 0dBV output, 100Ω load) 0.05% maximum (headphones output, 2V rms output, 600Ω load) Noise EIN: -127dBu minimum (22Hz to 22kHz bandwidth, 150Ω source, gain control fully clockwise, 15dB pad out) Dynamic Range A/D: 114dB typical (22Hz to 22kHz) A-weighted D/A: 112dB typical (22Hz to 22kHz) A-weighted Frequency Response 10Hz to 40kHz, +/-0.5dB (any input to PC recording) 10Hz to 40kHz, +/-0.5dB (PC source to AUX output) Power Requirements USB bus powered, soft-start meets USB hot-plugging power requirements (5V, 100mA max current drawn during enumeration) 5V (+/- 10%, 500mA max current from USB port (USBPre 2 will not function if connected through a passive USB connection or hub) System Requirements Windows XP (SP3), Vista, or Windows 7 (32- and 64-bit) Mac OS X 10.4 or greater Linux Kernel 2.6.0 or greater (requires standard ALSA snd-usb-audio module) Dimensions (WxDxH) 7.25 x x 4.25 x 1.7" (180 x 100 x 43mm) Weight 1.13 lbs (0.5kg) Specialties 24- or 16-bit S/PDIF digital input Input Limiter Threshold: -4dBFS Low Cut Filter: 80Hz, -3.0dB, 12dB per octave |
