Back to the main page Back to category Speakers and Monitors
musical instrument details
Electro-Voice Passive Vertical Floor Monitor with 12" 2-way 500-Watt Driver and
Estimated price for orientation: 725 $
Category: Speakers and Monitors
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition MPN: TX1122FM
The TX1122FM is a single 12" two-way, 90° x 50° full-range vertical floor monitor. These high performance speakers feature EV's SMX woofers, which yield extraordinarily low levels of distortion without sacrificing sensitivity. The backbone grille design is aesthetically remarkable while also damage-resistant, and the input panels and handle were ergonomically designed for maximum comfort and utility. Steep slope analog crossovers with elliptical filters provide up to 36dB per octave slopes, greatly reducing acoustic transducer interaction for better sound and higher power handling. Finally, the floor monitors feature a patent-pending SST (Signal Synchronized Transducers) design which utilizes a split baffle layout, allowing the enclosure to be more compact and yielding near-perfect driver phase summation. Tour X speakers are ideal for bands, entertainers, DJ, karaoke, speech reinforcement, and more. Features: Two-way, high-output design Vented LF enclosure Neutrik Speakon® paralleled pass-through connectors Two integrated handles Ideal for small-to-medium stages Signal Synchronized Transducers™ for woofer/tweeter alignment Low-distortion SMX2121 woofer with fully symmetric drive 1.25-inch DH3/2010A titanium HF compression driver Constant-directivity 90º H x 50º V horn Integrated 24 dB/octave crossover with HF protection 99 dB sensitivity, 132 dB maximum SPL Power handling: 500 W continuous, 2000 W peak Black EVCoat™ finish Specifications: Frequency Response (-3dB): 70 - 20000 Hz Frequency Response (-10dB): 55 - 20000 Hz Recommended High-Pass Frequency: 60 Hz Sensitivity @ 1W/1m: 99 dB Max SPL/1m (calculated): 132 dB Coverage (nominal -6dB) H°: 90 ° Coverage (nominal -6dB) V°: 50 ° Rotatable Horn: No System Power Handling (continuous/program/peak): 500/1000/2000 Watts LF Transducer: SMX2121 HF Transducer: DH3 Crossover Frequency: 1600 Hz Nominal Impedance (Passive): 8 Ohms Minimum Impedance: 6.4 Ohms Enclosure Material: Plywood and MDF with EVCOAT Suspension: (6) 3/8-inch threaded inserts Color: Black Flying: Yes Input Connections: Parallel Neutrik® NL4 Internal Crossover: Yes Speaker Type: Full Range Net Weight: 43.65 lbs Dimensions (HxWxD): 17.32" x 14.33" x 22.56"
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | MPN: | TX1122FM |
The TX1122FM is a single 12" two-way, 90° x 50° full-range vertical floor monitor. These high performance speakers feature EV's SMX woofers, which yield extraordinarily low levels of distortion without sacrificing sensitivity. The backbone grille design is aesthetically remarkable while also damage-resistant, and the input panels and handle were ergonomically designed for maximum comfort and utility. Steep slope analog crossovers with elliptical filters provide up to 36dB per octave slopes, greatly reducing acoustic transducer interaction for better sound and higher power handling. Finally, the floor monitors feature a patent-pending SST (Signal Synchronized Transducers) design which utilizes a split baffle layout, allowing the enclosure to be more compact and yielding near-perfect driver phase summation. Tour X speakers are ideal for bands, entertainers, DJ, karaoke, speech reinforcement, and more. Features: Two-way, high-output design Vented LF enclosure Neutrik Speakon® paralleled pass-through connectors Two integrated handles Ideal for small-to-medium stages Signal Synchronized Transducers™ for woofer/tweeter alignment Low-distortion SMX2121 woofer with fully symmetric drive 1.25-inch DH3/2010A titanium HF compression driver Constant-directivity 90º H x 50º V horn Integrated 24 dB/octave crossover with HF protection 99 dB sensitivity, 132 dB maximum SPL Power handling: 500 W continuous, 2000 W peak Black EVCoat™ finish Specifications: Frequency Response (-3dB): 70 - 20000 Hz Frequency Response (-10dB): 55 - 20000 Hz Recommended High-Pass Frequency: 60 Hz Sensitivity @ 1W/1m: 99 dB Max SPL/1m (calculated): 132 dB Coverage (nominal -6dB) H°: 90 ° Coverage (nominal -6dB) V°: 50 ° Rotatable Horn: No System Power Handling (continuous/program/peak): 500/1000/2000 Watts LF Transducer: SMX2121 HF Transducer: DH3 Crossover Frequency: 1600 Hz Nominal Impedance (Passive): 8 Ohms Minimum Impedance: 6.4 Ohms Enclosure Material: Plywood and MDF with EVCOAT Suspension: (6) 3/8-inch threaded inserts Color: Black Flying: Yes Input Connections: Parallel Neutrik® NL4 Internal Crossover: Yes Speaker Type: Full Range Net Weight: 43.65 lbs Dimensions (HxWxD): 17.32" x 14.33" x 22.56"