Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR MANUFACTURER

Package Includes: (1) Audio Technica ATW-3171BC UHF Wireless Handheld Condenser Mic Sys (1) Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output (1) Rockville RX230 2 Way Stereo / 3 Way Mono Crossover with XLR Input and Output

---

ATW-3171BC Includes: (1) ATW-R3100b Receiver (1) ATW-T371b Handheld Cardioid Condenser Microphone/Transmitter - C Band ATW-3171b
Audio-Technica’s third-generation 3000 Series wireless systems offer up to 1001 selectable UHF frequencies and new features for clear sound & intuitive operation. We’ve simplified selection of usable frequencies, increased system reliability, and illuminated transmitter screens for clear reads on dark stages. It all adds up to the luxury of rock-solid, richly detailed high-fidelity sound.The 3000 Series is available with either a dynamic or condenser handheld transmitter featuring rugged metal construction and slim ergonomic design. The ATW-T371b handheld transmitter features the studio-quality Artist Series ATM710 cardioid condenser element. System Features: 996 - 1001 UHF frequencies in one of three UHF frequency ranges Frequency Bands: Band C: 541.500 MHz to 566.375 MHz (996 frequencies) Antenna power available for powered antennas & other in-line RF devices Nine pre-coordinated frequency scan groups simplify selection of usable frequencies in a multi-channel wireless system True Diversity operation reduces dropouts Advanced digital Tone Lock™ squelch effectively blocks stray RF and communicates transmitter data for receiver display Transmitters offer backlit LCD & dual-color LED Locking battery compartment with secure latch and robust design Ground-lift switch helps eliminate audible hum caused by ground loops Balanced and unbalanced audio output jacks ATW-T310b UniPak® transmitter includes Super Hi-Z input that provides optimum load for guitar pickups Overall System Specifications: Operating Frequencies: UHF band Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Not all frequencies are available in all areas. Please check with local regulations. Minimum Frequency Step: 25 kHz Modulation Mode: FM Maximum Deviation: ±35 kHz Dynamic Range: > 110 dB (A-weighted), typical Total Harmonic Distortion: < 1% (at 1 kHz, ±17.5 kHz deviation) Operating Range: 100 m (300'), typical Open range environment with no interfering signals. Operating Temperature Range: -5º C to +45º C (23º F to 113º F) Battery and LCD performance may be reduced at very low temperatures. Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB) ATW-R3100b Receiver Specifications: Receiving System: True diversity Image Rejection: 60 dB nominal, 55 dB minimum RF Sensitivity: 20 dBuV at 60 dB S/N ratio Maximum Output Level: XLR, balanced: +9 dBV; ¼" (6.3 mm), unbalanced: +7 dBV Antenna Input: BNC-type, 50 ohms Bias voltage 12V DC, 60 mA, each Power Requirements: 12-18V DC, 500 mA Dimensions(W x D x H): 210.0 mm x 164.4 mm x 44.0 mm / 8.27" x 6.47" x 1.73"
Not including BNC connectors or feet. Net Weight: 1.1 kg (38.8 oz), without accessories Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters ATW-T371b Handheld Microphone/Transmitter Specifications: RF Power Output: High: 30 mW; Low: 10 mW, (switchable), at 50 ohms Spurious Emissions: Following federal and national regulations Microphone Element: Condenser cardioid Batteries: Two 1.5V AA, not included Battery Life: High: 6 hours (alkaline) Low: 8 hours (alkaline) Depending on battery type and use pattern. Dimensions: 240.0 mm (9.45") long, 50.0 mm (1.97") diameter Net Weight: 284 g (10.0 oz), without batteries Accessory Included: AT8456a Quiet-Flex™ stand clamp
(Link opens in a new window)

---

  Description of REQ231:
The Rockville REQ231 is an extremely high quality professional rack mountable equalizer. This is a 2 channel equalizer with 31 bands per channel. The main focus on this was sound quality and making it rugged and tough. We wanted to build a professional product that will instantly make a good speaker sound better, and after months of testing we know we did it!
This graphic EQ also has a low cut crossover filter switch, with status LED, that helps remove rumble from mics. Another great feature is the bypass switch, with LED indicator, which is very convenient when doing sound checks.We added a sub output with frequency controls which is something that we see a need for. Many brands for some odd reason do not give you a sub output and sub controls. We made sure to include this important function.If you want the best sounding EQ on the market at a great price, then we highly recommend you try out our REQ231. If you are unsatisfied with the quality we will give you a 90 day money back guarantee including return shipping!
Features: Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output Dual channel (31 bands per channel) Variable stage low and high cut filters
1/3 octave filter sets (ISO centers)
20 Hz to 20 kHz effective equalization range
Constant Q filters
Selectable 6dB or 12dB cut or boost range
Output level LEDs (-10 to +17 dB)
Bypass switch with status LED
Ground lift switch
Balanced XLR input/output
Subwoofer out
Channels: 2 (stereo)
Connectors: XLR balanced inputs and outputs
Bands: 31 per channel
Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 16 kHz, 20 kHz
Control Range: Selectable +/-12dB 0r +/-6dB
Input Impedance: 50k ohms
Output Impedance: 600 ohms
Maximum Output Level: +21dB
Level Control: +/- 10 dB
Signal to Noise: >93 dB
Distortion: 0.005%
Roll-off filters: 18dB/octave, Butterworth
Power Consumption: 15 watts
Weight Unpacked: 7.00 lbs.
Weight Packed: 9 lbs.
Width Packed: 5.87"
Height Packed: 20. 5"
Depth Packed: 9.62"

---

 About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty

---

Features of RX230: Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover
Ability to mix 2 channels output
24dB/Octave filters
Mute switches
Channel Gain Control: 0 to +12 dB
Low Frequency Level Control: -∞ to +6 dB
High Frequency Level Control: -∞ to +6 dB
Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes • Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz)
Switchable 2-way stereo or 3-way mono operation
Subwoofer out
Subwoofer X-Over Freq ( 30Hz – 200Hz ) adjustable
Subwoofer Gain -6 to +6 dB Specifications: Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their relative passbands.
Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB
Low Frequency Output: -86 dBu below 80 dB
High Frequency Output: -84 dBu below -78 dB
Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu
Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
Input Impedance: 10k ohms unbalanced
Dimensions: 19 x 4.85 x 1.8 inches
Gross weight: 4.18 Lbs Connectors:
Inputs: XLR Balanced
Outputs: XLR Balanced
Power Requirements: 120V AC, 50/60 Hz, 20 watts
110-120V voltage

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy. Prior to returning merchandise, contact us and we will give you a return authorization #. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us. Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options: You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit. You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us. Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.