Back to the main page Back to category Synthesizers
musical instrument details
Audio Damage Sequencer 1 Eurorack Module
Estimated price for orientation: 720 $
Category: Synthesizers
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Audio Damage Features: Sequencer Type: Sequencer Model: Sequencer 1
Selling my beloved Sequencer 1Sequencer 1 is, quite simply, the most powerful, feature-packed CV/Gate sequencer available for the Euro-Rack format.Updated with latest firmware. It will also come with a MicroSD & an adaptor to make your life easier for future updates.» Four banks of sixteen patterns each, for a total of 64 patterns.
» Each pattern can be 1 to 64 steps.
» Direct front-panel access to all major features; hardly any menu diving.
» Micro SD Card (on back of unit) for pattern storage and super-simple firmware updates. 2gb Micro SD card included with unit, pre-installed with latest firmware.
» 1V/Oct and Hz/Volt pitch CV output.
» Individually programmable gate and accent outputs, with selectable gate, inverse gate (vintage Yamaha), and S-trig (vintage Korg and Moog) modes.
» External sync, run, and reset inputs. (1 pulse per step currently. 24- and 48-ppq DIN sync coming soon!)
» Zero-latency sync, run, and reset outputs. (24- and 48-ppq modes coming soon!)
» Three tempo-synced internal LFOs with 25 waveforms, phase, three voltage modes, random amplitude, and length from single step to 256 steps (16 measures at 4/4).
» Two CV inputs for modulating current step, step mode, gate length, current pattern, transpose, repeat mode, ratcheting, and scale.
» Three CV outputs programmable per step, with several LFO modes (replace, addition, and multiplication).
» Programmable per step: pitch, gate, accent, note length/tie, three CV output values, slide, and ratchet.
» Programmable per pattern: swing, number of steps, playback mode (Nine different stepping modes.)
» Front-panel "Repeat" functions for live-cutting of sequences; repeats the last 8, 4, 2, or 1 step(s) while held down. Also a CV modulation target.
» Front-panel "Ratchet" functions for ratcheting 2 or 4 times on each step while held down. An additional 3-step ratchet is available for direct programming per step.
» Scale/mode quantization, with 45 preset scales and 8 user-programmable scales. Includes separate Tonic setting, and front panel transpose.
» Per-step repeat settings for strange pattern length manipulation.
» 20mm depth, eminently skiffable.
» 36HP width, 110ma current draw on the +12V buss.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Audio Damage |
| Features: | Sequencer | Type: | Sequencer |
| Model: | Sequencer 1 |
Selling my beloved Sequencer 1Sequencer 1 is, quite simply, the most powerful, feature-packed CV/Gate sequencer available for the Euro-Rack format.Updated with latest firmware. It will also come with a MicroSD & an adaptor to make your life easier for future updates.» Four banks of sixteen patterns each, for a total of 64 patterns.
» Each pattern can be 1 to 64 steps.
» Direct front-panel access to all major features; hardly any menu diving.
» Micro SD Card (on back of unit) for pattern storage and super-simple firmware updates. 2gb Micro SD card included with unit, pre-installed with latest firmware.
» 1V/Oct and Hz/Volt pitch CV output.
» Individually programmable gate and accent outputs, with selectable gate, inverse gate (vintage Yamaha), and S-trig (vintage Korg and Moog) modes.
» External sync, run, and reset inputs. (1 pulse per step currently. 24- and 48-ppq DIN sync coming soon!)
» Zero-latency sync, run, and reset outputs. (24- and 48-ppq modes coming soon!)
» Three tempo-synced internal LFOs with 25 waveforms, phase, three voltage modes, random amplitude, and length from single step to 256 steps (16 measures at 4/4).
» Two CV inputs for modulating current step, step mode, gate length, current pattern, transpose, repeat mode, ratcheting, and scale.
» Three CV outputs programmable per step, with several LFO modes (replace, addition, and multiplication).
» Programmable per step: pitch, gate, accent, note length/tie, three CV output values, slide, and ratchet.
» Programmable per pattern: swing, number of steps, playback mode (Nine different stepping modes.)
» Front-panel "Repeat" functions for live-cutting of sequences; repeats the last 8, 4, 2, or 1 step(s) while held down. Also a CV modulation target.
» Front-panel "Ratchet" functions for ratcheting 2 or 4 times on each step while held down. An additional 3-step ratchet is available for direct programming per step.
» Scale/mode quantization, with 45 preset scales and 8 user-programmable scales. Includes separate Tonic setting, and front panel transpose.
» Per-step repeat settings for strange pattern length manipulation.
» 20mm depth, eminently skiffable.
» 36HP width, 110ma current draw on the +12V buss.
» Each pattern can be 1 to 64 steps.
» Direct front-panel access to all major features; hardly any menu diving.
» Micro SD Card (on back of unit) for pattern storage and super-simple firmware updates. 2gb Micro SD card included with unit, pre-installed with latest firmware.
» 1V/Oct and Hz/Volt pitch CV output.
» Individually programmable gate and accent outputs, with selectable gate, inverse gate (vintage Yamaha), and S-trig (vintage Korg and Moog) modes.
» External sync, run, and reset inputs. (1 pulse per step currently. 24- and 48-ppq DIN sync coming soon!)
» Zero-latency sync, run, and reset outputs. (24- and 48-ppq modes coming soon!)
» Three tempo-synced internal LFOs with 25 waveforms, phase, three voltage modes, random amplitude, and length from single step to 256 steps (16 measures at 4/4).
» Two CV inputs for modulating current step, step mode, gate length, current pattern, transpose, repeat mode, ratcheting, and scale.
» Three CV outputs programmable per step, with several LFO modes (replace, addition, and multiplication).
» Programmable per step: pitch, gate, accent, note length/tie, three CV output values, slide, and ratchet.
» Programmable per pattern: swing, number of steps, playback mode (Nine different stepping modes.)
» Front-panel "Repeat" functions for live-cutting of sequences; repeats the last 8, 4, 2, or 1 step(s) while held down. Also a CV modulation target.
» Front-panel "Ratchet" functions for ratcheting 2 or 4 times on each step while held down. An additional 3-step ratchet is available for direct programming per step.
» Scale/mode quantization, with 45 preset scales and 8 user-programmable scales. Includes separate Tonic setting, and front panel transpose.
» Per-step repeat settings for strange pattern length manipulation.
» 20mm depth, eminently skiffable.
» 36HP width, 110ma current draw on the +12V buss.