Back to the main page Back to category Other Drums
musical instrument details
Bernstein Compact Mobil Electronic Service Kit
Estimated price for orientation: 2 286 $
Category: Other Drums
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: N/A Manufacturer Part Number: BER7000 UPC: Does not apply
Elegant case made from deep-drawn, impact-resistant, grained dark brown plastic with a continuous bronze anodised aluminium frame, dustproof and rainproof, acid-resistant, scratch-resistant and non-slip. For energy saving transport stable rolls are installed and a telescopic handle is mounted. The arrangement of the rolls results in a vibration absorbing locomotion. The tools are held in their partitions. The case has 3 removable tool trays: No. 7010, 7020 and 7030. The trays contain 63 tools. On request the tray No. 7030 may be exchanged for No. 7060 (VDE-tools). The lid of the case has a pocket for documents etc. The plastic tray with adjustable partitions in the bottom allows a clear arrangement of a soldering iron, measuring instruments and accessories of various sizes. The case has two locks. Outside dimensions: 500 x 400 x 200 mm Weight without tools: approx. 8.000 kg Weight with tools 7000: approx. 10.600 kg Weight with tools 7100: approx. 10.700 kg Description of individual toolsTool tray No. 7010 2-155 Claw-type gripper with 3 wire claws and clip 2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting and removing IC's 2-620 PLCC-extractor 2-655 Pocket inspection lite with fibre optic adaptor for close inspection of small, tight, hard-to-see areas 3-654-14 EUROline-side-cutters, 120 mm, for hard wire up to 0.4 mm, for copper wire up to 1.5 mm, with slim rounded head, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-672-14 EUROline-end-cutters, 130 mm, for copper wire up to 0.6 mm, cutting edge 20° angular, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-682-14 EUROline-flat nose pliers, 130 mm, extremely slim, box joint,double leaf spring, bright burnished, with bicoloured hand-guard 3-683-14 EUROline-snip nose pliers, 130 mm, extremely slim, box joint,double leaf spring, bright burnished, with bicoloured hand-guard 4-161 Electronics screwdriver with special handle and swivel top, bladechrome vanadium, chrome-plated, with black tip, 40 x 1.0 mm 4-162 Electronics screwdriver as above, 40 x 1.5 mm 4-163 Electronics screwdriver as above, 40 x 2.0 mm 4-164 Electronics screwdriver as above, 50 x 2.5 mm 4-165 Electronics screwdriver as above, 50 x 3.0 mm 4-281 Electronics cross-recess screwdriver as above, size 000 4-282 Electronics cross-recess screwdriver as above, size 00 4-283 Electronics cross-recess screwdriver as above, size 0 4-284 Electronics cross-recess screwdriver as above, size 1 5-006 Component tweezers, 140 mm, with insulated jaws, for easy insertion and removal of plug-in transistors of various sizes, nickel-plated 5-049 Watchmaker's tweezers, sharply-pointed, 110 mm, stainless 5-107 Engineer's tweezers, made from steel, with bent tips, 150 mm,nickel-plated 5-115 Heat dissipating tweezers, for use when soldering transistors,gold-bonded diodes etc., 165 mm, nickel-plated 5-117 Engineer's tweezers, straight-flat-wide, 145 mm, nickel-plated 5-191 ESD tweezers, 120 mm, conductive, rounded tips 5-194 ESD tweezers, 120 mm, conductive, bent pointed tips Tool tray No. 7020 1-735 Adjusting screwdriver handle, double-ended 1-738 Special hard plastic bit, 1.5 x 0.5 mm 1-739 Special hard plastic bit, 3.0 x 0.5 mm 1-909 Engineer's mirror with handle, made entirely from BERNSTEINIT 2-126 Desoldering bar, slotted at one end, with plastic handle 2-127 Tin knife with plastic handle, 115 mm 2-132 Spring hook, nickel-plated and insulated, 175 mm 2-161 Magnetic bar with double ball- and socket joint, 215 mm 2-166 Glass fibre contact cleaner 2-265 2 test prods, red and black, extremely slim, pointed and flexible, blade made from 1 mm steel wire 2-295 Hand magnifier with light 3-565 Water pump pliers, 130 mm, chrome-plated 3-715-1 Combination pliers, 115 mm, chrome-plated, BERNSTEINIT-insulation 4-141 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 75 x 3.5 mm, with black tips 4-142 Screwdriver, as above, 100 x 4.0 mm 4-271 Cross-recess screwdriver, Pozidriv, size 0, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tips 4-272 Cross-recess screwdriver, Pozidriv, size 1, as above 4-351 Offset screwdriver, 100 x 5 mm, nickel-plated, chrome vanadium 4-407 Retaining screwdriver, 110 x 4 mm 5-161 Clamping scissors, 130 mm, stainless 5-301 Special scissors, with serration, 110 mm, nickel-plated 6-771 Adjustable wrench, jaws opening 0 - 12 mm, total length 100 mm 6-964 L TORX-Screwdriver, size T 9, with hole, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 6-965 L TORX-Screwdriver, size T 10, with hole, as above 6-966 L TORX-Screwdriver, size T 15, with hole, as above 7-425 Dust brush Tool tray No. 7030 3-133-1 Side cutters, 145 mm, for hard wire up to 1.25 mm, for soft wire up to 2.5 mm, chrome-plated, with BERNSTEINIT-insulation 3-235-1 Telephone pliers, 160 mm, chrome-plated, with BERNSTEINIT-insulation 3-732-1 Combination pliers, 165 mm, chrome-plated, with BERNSTEINIT-insulation 4-143 Screwdriver, to DIN 5265, special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 125 x 5.5 mm 4-144 Screwdriver, as above, blade 150 x 6.5 mm 4-145 Screwdriver, as above, blade 150 x 8.0 mm 4-256 Cross-recess screwdriver, as above, size 1, with black tip 4-257 Cross-recess screwdriver, as above, size 2, with black tip 4-344 VDE Voltage tester, for 220 - 250 V, blade 100 x 3.5 mm 5-0605 Universal stripping tool 6-105 Socket wrench, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 5.5 mm A/F 6-107 Socket wrench, as above, 7.0 mm A/F To complete the set we recommend for the bottom of the case: 5-240 Warding file set, 6 pieces, with wooden handles, in a wallet 6-820 Set of allen hex sockets, 8 pieces, 1.5 - 6.0 mm 7-512 Miniature caliper square, measuring range 75 mm, stainless 8-135 soldering iron, 15 W/230 V 8-390 Desoldering pump 9-325 Plastic box, with hinged lid and adjustable compartments, 200 x 130 x 30 mm Bernstein Compact Mobil Electronic Service Kit Elegant case made from deep-drawn, impact-resistant, grained dark brown plastic with a continuous bronze anodised aluminium frame, dustproof and rainproof, acid-resistant, scratch-resistant and non-slip. For energy saving transport stable rolls are installed and a telescopic handle is mounted. The arrangement of the rolls results in a vibration absorbing locomotion. The tools are held in their partitions. The case has 3 removable tool trays: No. 7010, 7020 and 7030. The trays contain 63 tools. On request the tray No. 7030 may be exchanged for No. 7060 (VDE-tools). The lid of the case has a pocket for documents etc. The plastic tray with adjustable partitions in the bottom allows a clear arrangement of a soldering iron, measuring instruments and accessories of various sizes. The case has two locks. Outside dimensions: 500 x 400 x 200 mm
Weight without tools: approx. 8.000 kg
Weight with tools 7000: approx. 10.600 kg
Weight with tools 7100: approx. 10.700 kg Description of individual toolsTool tray No. 7010 2-155 Claw-type gripper with 3 wire claws and clip 2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting and removing IC's 2-620 PLCC-extractor 2-655 Pocket inspection lite with fibre optic adaptor for close inspection of small, tight, hard-to-see areas 3-654-14 EUROline-side-cutters, 120 mm, for hard wire up to 0.4 mm, for copper wire up to 1.5 mm, with slim rounded head, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-672-14 EUROline-end-cutters, 130 mm, for copper wire up to 0.6 mm, cutting edge 20° angular, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-682-14 EUROline-flat nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard 3-683-14 EUROline-snip nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard 4-161 Electronics screwdriver with special handle and swivel top, blade
chrome vanadium, chrome-plated, with black tip, 40 x 1.0 mm 4-162 Electronics screwdriver as above, 40 x 1.5 mm 4-163 Electronics screwdriver as above, 40 x 2.0 mm 4-164 Electronics screwdriver as above, 50 x 2.5 mm 4-165 Electronics screwdriver as above, 50 x 3.0 mm 4-281 Electronics cross-recess screwdriver as above, size 000 4-282 Electronics cross-recess screwdriver as above, size 00 4-283 Electronics cross-recess screwdriver as above, size 0 4-284 Electronics cross-recess screwdriver as above, size 1 5-006 Component tweezers, 140 mm, with insulated jaws, for easy insertion and removal of plug-in transistors of various sizes, nickel-plated 5-049 Watchmaker's tweezers, sharply-pointed, 110 mm, stainless 5-107 Engineer's tweezers, made from steel, with bent tips, 150 mm,
nickel-plated 5-115 Heat dissipating tweezers, for use when soldering transistors,
gold-bonded diodes etc., 165 mm, nickel-plated 5-117 Engineer's tweezers, straight-flat-wide, 145 mm, nickel-plated 5-191 ESD tweezers, 120 mm, conductive, rounded tips 5-194 ESD tweezers, 120 mm, conductive, bent pointed tips Tool tray No. 7020 1-735 Adjusting screwdriver handle, double-ended 1-738 Special hard plastic bit, 1.5 x 0.5 mm 1-739 Special hard plastic bit, 3.0 x 0.5 mm 1-909 Engineer's mirror with handle, made entirely from BERNSTEINIT 2-126 Desoldering bar, slotted at one end, with plastic handle 2-127 Tin knife with plastic handle, 115 mm 2-132 Spring hook, nickel-plated and insulated, 175 mm 2-161 Magnetic bar with double ball- and socket joint, 215 mm 2-166 Glass fibre contact cleaner 2-265 2 test prods, red and black, extremely slim, pointed and flexible, blade made from 1 mm steel wire 2-295 Hand magnifier with light 3-565 Water pump pliers, 130 mm, chrome-plated 3-715-1 Combination pliers, 115 mm, chrome-plated, BERNSTEINIT-insulation 4-141 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 75 x 3.5 mm, with black tips 4-142 Screwdriver, as above, 100 x 4.0 mm 4-271 Cross-recess screwdriver, Pozidriv, size 0, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tips 4-272 Cross-recess screwdriver, Pozidriv, size 1, as above 4-351 Offset screwdriver, 100 x 5 mm, nickel-plated, chrome vanadium 4-407 Retaining screwdriver, 110 x 4 mm 5-161 Clamping scissors, 130 mm, stainless 5-301 Special scissors, with serration, 110 mm, nickel-plated 6-771 Adjustable wrench, jaws opening 0 - 12 mm, total length 100 mm 6-964 L TORX-Screwdriver, size T 9, with hole, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 6-965 L TORX-Screwdriver, size T 10, with hole, as above 6-966 L TORX-Screwdriver, size T 15, with hole, as above 7-425 Dust brush Tool tray No. 7030
3-133-1 Side cutters, 145 mm, for hard wire up to 1.25 mm, for soft wire up to 2.5 mm, chrome-plated, with BERNSTEINIT-insulation 3-235-1 Telephone pliers, 160 mm, chrome-plated, with BERNSTEINIT-insulation 3-732-1 Combination pliers, 165 mm, chrome-plated, with BERNSTEINIT-insulation 4-143 Screwdriver, to DIN 5265, special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 125 x 5.5 mm 4-144 Screwdriver, as above, blade 150 x 6.5 mm 4-145 Screwdriver, as above, blade 150 x 8.0 mm 4-256 Cross-recess screwdriver, as above, size 1, with black tip 4-257 Cross-recess screwdriver, as above, size 2, with black tip 4-344 VDE Voltage tester, for 220 - 250 V, blade 100 x 3.5 mm 5-0605 Universal stripping tool 6-105 Socket wrench, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 5.5 mm A/F 6-107 Socket wrench, as above, 7.0 mm A/F To complete the set we recommend for the bottom of the case: 5-240 Warding file set, 6 pieces, with wooden handles, in a wallet 6-820 Set of allen hex sockets, 8 pieces, 1.5 - 6.0 mm 7-512 Miniature caliper square, measuring range 75 mm, stainless 8-135 soldering iron, 15 W/230 V 8-390 Desoldering pump 9-325 Plastic box, with hinged lid and adjustable compartments, 200 x 130 x 30 mm
Price: $11.00 (local shipping) Standard delivery - $11.00 Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Shipping is a flat rate across AU at a rate of $11.00 Returns are accepted Items must be returned within 7 days of the auction ending Buyer will pay for return shipping.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | N/A |
| Manufacturer Part Number: | BER7000 | UPC: | Does not apply |
Elegant case made from deep-drawn, impact-resistant, grained dark brown plastic with a continuous bronze anodised aluminium frame, dustproof and rainproof, acid-resistant, scratch-resistant and non-slip. For energy saving transport stable rolls are installed and a telescopic handle is mounted. The arrangement of the rolls results in a vibration absorbing locomotion. The tools are held in their partitions. The case has 3 removable tool trays: No. 7010, 7020 and 7030. The trays contain 63 tools. On request the tray No. 7030 may be exchanged for No. 7060 (VDE-tools). The lid of the case has a pocket for documents etc. The plastic tray with adjustable partitions in the bottom allows a clear arrangement of a soldering iron, measuring instruments and accessories of various sizes. The case has two locks. Outside dimensions: 500 x 400 x 200 mm Weight without tools: approx. 8.000 kg Weight with tools 7000: approx. 10.600 kg Weight with tools 7100: approx. 10.700 kg Description of individual toolsTool tray No. 7010 2-155 Claw-type gripper with 3 wire claws and clip 2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting and removing IC's 2-620 PLCC-extractor 2-655 Pocket inspection lite with fibre optic adaptor for close inspection of small, tight, hard-to-see areas 3-654-14 EUROline-side-cutters, 120 mm, for hard wire up to 0.4 mm, for copper wire up to 1.5 mm, with slim rounded head, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-672-14 EUROline-end-cutters, 130 mm, for copper wire up to 0.6 mm, cutting edge 20° angular, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-682-14 EUROline-flat nose pliers, 130 mm, extremely slim, box joint,double leaf spring, bright burnished, with bicoloured hand-guard 3-683-14 EUROline-snip nose pliers, 130 mm, extremely slim, box joint,double leaf spring, bright burnished, with bicoloured hand-guard 4-161 Electronics screwdriver with special handle and swivel top, bladechrome vanadium, chrome-plated, with black tip, 40 x 1.0 mm 4-162 Electronics screwdriver as above, 40 x 1.5 mm 4-163 Electronics screwdriver as above, 40 x 2.0 mm 4-164 Electronics screwdriver as above, 50 x 2.5 mm 4-165 Electronics screwdriver as above, 50 x 3.0 mm 4-281 Electronics cross-recess screwdriver as above, size 000 4-282 Electronics cross-recess screwdriver as above, size 00 4-283 Electronics cross-recess screwdriver as above, size 0 4-284 Electronics cross-recess screwdriver as above, size 1 5-006 Component tweezers, 140 mm, with insulated jaws, for easy insertion and removal of plug-in transistors of various sizes, nickel-plated 5-049 Watchmaker's tweezers, sharply-pointed, 110 mm, stainless 5-107 Engineer's tweezers, made from steel, with bent tips, 150 mm,nickel-plated 5-115 Heat dissipating tweezers, for use when soldering transistors,gold-bonded diodes etc., 165 mm, nickel-plated 5-117 Engineer's tweezers, straight-flat-wide, 145 mm, nickel-plated 5-191 ESD tweezers, 120 mm, conductive, rounded tips 5-194 ESD tweezers, 120 mm, conductive, bent pointed tips Tool tray No. 7020 1-735 Adjusting screwdriver handle, double-ended 1-738 Special hard plastic bit, 1.5 x 0.5 mm 1-739 Special hard plastic bit, 3.0 x 0.5 mm 1-909 Engineer's mirror with handle, made entirely from BERNSTEINIT 2-126 Desoldering bar, slotted at one end, with plastic handle 2-127 Tin knife with plastic handle, 115 mm 2-132 Spring hook, nickel-plated and insulated, 175 mm 2-161 Magnetic bar with double ball- and socket joint, 215 mm 2-166 Glass fibre contact cleaner 2-265 2 test prods, red and black, extremely slim, pointed and flexible, blade made from 1 mm steel wire 2-295 Hand magnifier with light 3-565 Water pump pliers, 130 mm, chrome-plated 3-715-1 Combination pliers, 115 mm, chrome-plated, BERNSTEINIT-insulation 4-141 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 75 x 3.5 mm, with black tips 4-142 Screwdriver, as above, 100 x 4.0 mm 4-271 Cross-recess screwdriver, Pozidriv, size 0, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tips 4-272 Cross-recess screwdriver, Pozidriv, size 1, as above 4-351 Offset screwdriver, 100 x 5 mm, nickel-plated, chrome vanadium 4-407 Retaining screwdriver, 110 x 4 mm 5-161 Clamping scissors, 130 mm, stainless 5-301 Special scissors, with serration, 110 mm, nickel-plated 6-771 Adjustable wrench, jaws opening 0 - 12 mm, total length 100 mm 6-964 L TORX-Screwdriver, size T 9, with hole, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 6-965 L TORX-Screwdriver, size T 10, with hole, as above 6-966 L TORX-Screwdriver, size T 15, with hole, as above 7-425 Dust brush Tool tray No. 7030 3-133-1 Side cutters, 145 mm, for hard wire up to 1.25 mm, for soft wire up to 2.5 mm, chrome-plated, with BERNSTEINIT-insulation 3-235-1 Telephone pliers, 160 mm, chrome-plated, with BERNSTEINIT-insulation 3-732-1 Combination pliers, 165 mm, chrome-plated, with BERNSTEINIT-insulation 4-143 Screwdriver, to DIN 5265, special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 125 x 5.5 mm 4-144 Screwdriver, as above, blade 150 x 6.5 mm 4-145 Screwdriver, as above, blade 150 x 8.0 mm 4-256 Cross-recess screwdriver, as above, size 1, with black tip 4-257 Cross-recess screwdriver, as above, size 2, with black tip 4-344 VDE Voltage tester, for 220 - 250 V, blade 100 x 3.5 mm 5-0605 Universal stripping tool 6-105 Socket wrench, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 5.5 mm A/F 6-107 Socket wrench, as above, 7.0 mm A/F To complete the set we recommend for the bottom of the case: 5-240 Warding file set, 6 pieces, with wooden handles, in a wallet 6-820 Set of allen hex sockets, 8 pieces, 1.5 - 6.0 mm 7-512 Miniature caliper square, measuring range 75 mm, stainless 8-135 soldering iron, 15 W/230 V 8-390 Desoldering pump 9-325 Plastic box, with hinged lid and adjustable compartments, 200 x 130 x 30 mm
We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout.
Bernstein Compact Mobil Electronic Service Kit
Elegant case made from deep-drawn, impact-resistant, grained dark brown plastic with a continuous bronze anodised aluminium frame, dustproof and rainproof, acid-resistant, scratch-resistant and non-slip. For energy saving transport stable rolls are installed and a telescopic handle is mounted. The arrangement of the rolls results in a vibration absorbing locomotion. The tools are held in their partitions. The case has 3 removable tool trays: No. 7010, 7020 and 7030. The trays contain 63 tools. On request the tray No. 7030 may be exchanged for No. 7060 (VDE-tools). The lid of the case has a pocket for documents etc. The plastic tray with adjustable partitions in the bottom allows a clear arrangement of a soldering iron, measuring instruments and accessories of various sizes. The case has two locks. Outside dimensions: 500 x 400 x 200 mm
Weight without tools: approx. 8.000 kg
Weight with tools 7000: approx. 10.600 kg
Weight with tools 7100: approx. 10.700 kg Description of individual toolsTool tray No. 7010 2-155 Claw-type gripper with 3 wire claws and clip 2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting and removing IC's 2-620 PLCC-extractor 2-655 Pocket inspection lite with fibre optic adaptor for close inspection of small, tight, hard-to-see areas 3-654-14 EUROline-side-cutters, 120 mm, for hard wire up to 0.4 mm, for copper wire up to 1.5 mm, with slim rounded head, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-672-14 EUROline-end-cutters, 130 mm, for copper wire up to 0.6 mm, cutting edge 20° angular, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-682-14 EUROline-flat nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard 3-683-14 EUROline-snip nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard 4-161 Electronics screwdriver with special handle and swivel top, blade
chrome vanadium, chrome-plated, with black tip, 40 x 1.0 mm 4-162 Electronics screwdriver as above, 40 x 1.5 mm 4-163 Electronics screwdriver as above, 40 x 2.0 mm 4-164 Electronics screwdriver as above, 50 x 2.5 mm 4-165 Electronics screwdriver as above, 50 x 3.0 mm 4-281 Electronics cross-recess screwdriver as above, size 000 4-282 Electronics cross-recess screwdriver as above, size 00 4-283 Electronics cross-recess screwdriver as above, size 0 4-284 Electronics cross-recess screwdriver as above, size 1 5-006 Component tweezers, 140 mm, with insulated jaws, for easy insertion and removal of plug-in transistors of various sizes, nickel-plated 5-049 Watchmaker's tweezers, sharply-pointed, 110 mm, stainless 5-107 Engineer's tweezers, made from steel, with bent tips, 150 mm,
nickel-plated 5-115 Heat dissipating tweezers, for use when soldering transistors,
gold-bonded diodes etc., 165 mm, nickel-plated 5-117 Engineer's tweezers, straight-flat-wide, 145 mm, nickel-plated 5-191 ESD tweezers, 120 mm, conductive, rounded tips 5-194 ESD tweezers, 120 mm, conductive, bent pointed tips Tool tray No. 7020 1-735 Adjusting screwdriver handle, double-ended 1-738 Special hard plastic bit, 1.5 x 0.5 mm 1-739 Special hard plastic bit, 3.0 x 0.5 mm 1-909 Engineer's mirror with handle, made entirely from BERNSTEINIT 2-126 Desoldering bar, slotted at one end, with plastic handle 2-127 Tin knife with plastic handle, 115 mm 2-132 Spring hook, nickel-plated and insulated, 175 mm 2-161 Magnetic bar with double ball- and socket joint, 215 mm 2-166 Glass fibre contact cleaner 2-265 2 test prods, red and black, extremely slim, pointed and flexible, blade made from 1 mm steel wire 2-295 Hand magnifier with light 3-565 Water pump pliers, 130 mm, chrome-plated 3-715-1 Combination pliers, 115 mm, chrome-plated, BERNSTEINIT-insulation 4-141 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 75 x 3.5 mm, with black tips 4-142 Screwdriver, as above, 100 x 4.0 mm 4-271 Cross-recess screwdriver, Pozidriv, size 0, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tips 4-272 Cross-recess screwdriver, Pozidriv, size 1, as above 4-351 Offset screwdriver, 100 x 5 mm, nickel-plated, chrome vanadium 4-407 Retaining screwdriver, 110 x 4 mm 5-161 Clamping scissors, 130 mm, stainless 5-301 Special scissors, with serration, 110 mm, nickel-plated 6-771 Adjustable wrench, jaws opening 0 - 12 mm, total length 100 mm 6-964 L TORX-Screwdriver, size T 9, with hole, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 6-965 L TORX-Screwdriver, size T 10, with hole, as above 6-966 L TORX-Screwdriver, size T 15, with hole, as above 7-425 Dust brush Tool tray No. 7030
3-133-1 Side cutters, 145 mm, for hard wire up to 1.25 mm, for soft wire up to 2.5 mm, chrome-plated, with BERNSTEINIT-insulation 3-235-1 Telephone pliers, 160 mm, chrome-plated, with BERNSTEINIT-insulation 3-732-1 Combination pliers, 165 mm, chrome-plated, with BERNSTEINIT-insulation 4-143 Screwdriver, to DIN 5265, special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 125 x 5.5 mm 4-144 Screwdriver, as above, blade 150 x 6.5 mm 4-145 Screwdriver, as above, blade 150 x 8.0 mm 4-256 Cross-recess screwdriver, as above, size 1, with black tip 4-257 Cross-recess screwdriver, as above, size 2, with black tip 4-344 VDE Voltage tester, for 220 - 250 V, blade 100 x 3.5 mm 5-0605 Universal stripping tool 6-105 Socket wrench, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 5.5 mm A/F 6-107 Socket wrench, as above, 7.0 mm A/F To complete the set we recommend for the bottom of the case: 5-240 Warding file set, 6 pieces, with wooden handles, in a wallet 6-820 Set of allen hex sockets, 8 pieces, 1.5 - 6.0 mm 7-512 Miniature caliper square, measuring range 75 mm, stainless 8-135 soldering iron, 15 W/230 V 8-390 Desoldering pump 9-325 Plastic box, with hinged lid and adjustable compartments, 200 x 130 x 30 mm
Weight without tools: approx. 8.000 kg
Weight with tools 7000: approx. 10.600 kg
Weight with tools 7100: approx. 10.700 kg Description of individual toolsTool tray No. 7010 2-155 Claw-type gripper with 3 wire claws and clip 2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting and removing IC's 2-620 PLCC-extractor 2-655 Pocket inspection lite with fibre optic adaptor for close inspection of small, tight, hard-to-see areas 3-654-14 EUROline-side-cutters, 120 mm, for hard wire up to 0.4 mm, for copper wire up to 1.5 mm, with slim rounded head, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-672-14 EUROline-end-cutters, 130 mm, for copper wire up to 0.6 mm, cutting edge 20° angular, box joint, double leaf spring, bright burnished, with bicoloured hand-guard 3-682-14 EUROline-flat nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard 3-683-14 EUROline-snip nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard 4-161 Electronics screwdriver with special handle and swivel top, blade
chrome vanadium, chrome-plated, with black tip, 40 x 1.0 mm 4-162 Electronics screwdriver as above, 40 x 1.5 mm 4-163 Electronics screwdriver as above, 40 x 2.0 mm 4-164 Electronics screwdriver as above, 50 x 2.5 mm 4-165 Electronics screwdriver as above, 50 x 3.0 mm 4-281 Electronics cross-recess screwdriver as above, size 000 4-282 Electronics cross-recess screwdriver as above, size 00 4-283 Electronics cross-recess screwdriver as above, size 0 4-284 Electronics cross-recess screwdriver as above, size 1 5-006 Component tweezers, 140 mm, with insulated jaws, for easy insertion and removal of plug-in transistors of various sizes, nickel-plated 5-049 Watchmaker's tweezers, sharply-pointed, 110 mm, stainless 5-107 Engineer's tweezers, made from steel, with bent tips, 150 mm,
nickel-plated 5-115 Heat dissipating tweezers, for use when soldering transistors,
gold-bonded diodes etc., 165 mm, nickel-plated 5-117 Engineer's tweezers, straight-flat-wide, 145 mm, nickel-plated 5-191 ESD tweezers, 120 mm, conductive, rounded tips 5-194 ESD tweezers, 120 mm, conductive, bent pointed tips Tool tray No. 7020 1-735 Adjusting screwdriver handle, double-ended 1-738 Special hard plastic bit, 1.5 x 0.5 mm 1-739 Special hard plastic bit, 3.0 x 0.5 mm 1-909 Engineer's mirror with handle, made entirely from BERNSTEINIT 2-126 Desoldering bar, slotted at one end, with plastic handle 2-127 Tin knife with plastic handle, 115 mm 2-132 Spring hook, nickel-plated and insulated, 175 mm 2-161 Magnetic bar with double ball- and socket joint, 215 mm 2-166 Glass fibre contact cleaner 2-265 2 test prods, red and black, extremely slim, pointed and flexible, blade made from 1 mm steel wire 2-295 Hand magnifier with light 3-565 Water pump pliers, 130 mm, chrome-plated 3-715-1 Combination pliers, 115 mm, chrome-plated, BERNSTEINIT-insulation 4-141 Screwdriver, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 75 x 3.5 mm, with black tips 4-142 Screwdriver, as above, 100 x 4.0 mm 4-271 Cross-recess screwdriver, Pozidriv, size 0, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tips 4-272 Cross-recess screwdriver, Pozidriv, size 1, as above 4-351 Offset screwdriver, 100 x 5 mm, nickel-plated, chrome vanadium 4-407 Retaining screwdriver, 110 x 4 mm 5-161 Clamping scissors, 130 mm, stainless 5-301 Special scissors, with serration, 110 mm, nickel-plated 6-771 Adjustable wrench, jaws opening 0 - 12 mm, total length 100 mm 6-964 L TORX-Screwdriver, size T 9, with hole, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 6-965 L TORX-Screwdriver, size T 10, with hole, as above 6-966 L TORX-Screwdriver, size T 15, with hole, as above 7-425 Dust brush Tool tray No. 7030
3-133-1 Side cutters, 145 mm, for hard wire up to 1.25 mm, for soft wire up to 2.5 mm, chrome-plated, with BERNSTEINIT-insulation 3-235-1 Telephone pliers, 160 mm, chrome-plated, with BERNSTEINIT-insulation 3-732-1 Combination pliers, 165 mm, chrome-plated, with BERNSTEINIT-insulation 4-143 Screwdriver, to DIN 5265, special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, with black tip 125 x 5.5 mm 4-144 Screwdriver, as above, blade 150 x 6.5 mm 4-145 Screwdriver, as above, blade 150 x 8.0 mm 4-256 Cross-recess screwdriver, as above, size 1, with black tip 4-257 Cross-recess screwdriver, as above, size 2, with black tip 4-344 VDE Voltage tester, for 220 - 250 V, blade 100 x 3.5 mm 5-0605 Universal stripping tool 6-105 Socket wrench, with special square BERNSTEIN handle, blade made from chrome vanadium, chrome-plated, 5.5 mm A/F 6-107 Socket wrench, as above, 7.0 mm A/F To complete the set we recommend for the bottom of the case: 5-240 Warding file set, 6 pieces, with wooden handles, in a wallet 6-820 Set of allen hex sockets, 8 pieces, 1.5 - 6.0 mm 7-512 Miniature caliper square, measuring range 75 mm, stainless 8-135 soldering iron, 15 W/230 V 8-390 Desoldering pump 9-325 Plastic box, with hinged lid and adjustable compartments, 200 x 130 x 30 mm
Price: $11.00 (local shipping)
Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. Standard delivery - $11.00
| PAYING VIA PAYPAL |
Shipping is a flat rate across AU at a rate of $11.00
Returns are accepted Items must be returned within 7 days of the auction ending Buyer will pay for return shipping.