Back to the main page Back to category Parts and Accessories
musical instrument details
AUDIO TECHNICA 4060 studio tube mic, power supply, cable, shock mount
Estimated price for orientation: 620 $
Category: Parts and Accessories
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Audio Technica MPN: 00653 Type: Condenser Microphone Pickup Pattern: Cardioid Model: AT 4060 Connector(s): XLR 3 Pin, XLR 7 Pin Country/Region of Manufacture: Japan
A great mic in great condition! I have only used it for a few sessions in a non-smoking environment. I set up on a sax player. The four mics come one right after the other and are in this order:
AT3060 subminiature-tube condenser mic
EV 414 b-ULS condenser mic
*AT 4060 tube condenser mic*
EV ndymn dynamic micLike other tube mic, the AT4060 features a 7-pin cable that connects the mic to a custom power supply, and the power supply has a regular 3-pin XLR out. You will always need the power supply to use this mic, however, no additional phantom power is required.Audio-Technica’s AT4060 cardioid vacuum tube condenser brings the warmth of vintage tube sound to every shade of the SPL spectrum. With a dynamic range that far exceeds that of other tube microphones, it as easily captures the subtlest nuances of vocal and instrumental performance as it handles guitar cabinets and other extreme SPL environments. Featuring hand-selected, individually tested and aged tubes, the AT4060 achieves the coveted, classic sound of valve design without compromising the specification standards required for the most demanding recording situations. Audio-Technica takes no chances with this microphone’s consistency and reliability: every AT4060 is individually tested and inspected for 100 percent quality assurance—rare in today’s world of mass-marketed studio microphones. AT4060. Vintage sound, rock-solid reliability and amazing versatility for studio and live performance. From Audio-Technica’s premium line of 40 Series condenser microphones.ELEMENT
Externally polarized (DC bias) condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa IMPEDANCE 200 ohms MAXIMUM INPUT SOUND LEVEL 150 dB SPL, 1 kHz at 1% T.H.D.;
149 dB SPL, 1 kHz at 0.5% T.H.D. NOISE 19 dB SPL DYNAMIC RANGE (typical) 131 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 75 dB, 1 kHz at 1 Pa POWER REQUIREMENTS AT8560 power supply (120V/230V AC) WEIGHT (MICROPHONE) 22.6 oz (640 g) WEIGHT (POWER SUPPLY) 4.19 lbs (1.9 kg) DIMENSIONS MICROPHONE: 8.27" (210.0 mm) long,
2.10" (53.4 mm) maximum body diameter POWER SUPPLY: 8.27" (210.0 mm) W x
8.86" (225.0 mm) D x 1.73" (44.0 mm) H OUTPUT CONNECTOR XLRM-type (on power supply) CABLES 32.8' (10 m) cable with 6 pin XLR-type connectors for use between microphone and power supply; AC power supply cable ACCESSORIES FURNISHED AT8560 power supply; AT8447 shock mount for 5/8"-27 threaded stands; rack-mount adapters for power supply; protective mic carrying case
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Audio Technica |
| MPN: | 00653 | Type: | Condenser Microphone |
| Pickup Pattern: | Cardioid | Model: | AT 4060 |
| Connector(s): | XLR 3 Pin, XLR 7 Pin | Country/Region of Manufacture: | Japan |
A great mic in great condition! I have only used it for a few sessions in a non-smoking environment. I set up on a sax player. The four mics come one right after the other and are in this order:
AT3060 subminiature-tube condenser mic
EV 414 b-ULS condenser mic
*AT 4060 tube condenser mic*
EV ndymn dynamic micLike other tube mic, the AT4060 features a 7-pin cable that connects the mic to a custom power supply, and the power supply has a regular 3-pin XLR out. You will always need the power supply to use this mic, however, no additional phantom power is required.Audio-Technica’s AT4060 cardioid vacuum tube condenser brings the warmth of vintage tube sound to every shade of the SPL spectrum. With a dynamic range that far exceeds that of other tube microphones, it as easily captures the subtlest nuances of vocal and instrumental performance as it handles guitar cabinets and other extreme SPL environments. Featuring hand-selected, individually tested and aged tubes, the AT4060 achieves the coveted, classic sound of valve design without compromising the specification standards required for the most demanding recording situations. Audio-Technica takes no chances with this microphone’s consistency and reliability: every AT4060 is individually tested and inspected for 100 percent quality assurance—rare in today’s world of mass-marketed studio microphones. AT4060. Vintage sound, rock-solid reliability and amazing versatility for studio and live performance. From Audio-Technica’s premium line of 40 Series condenser microphones.ELEMENT
AT3060 subminiature-tube condenser mic
EV 414 b-ULS condenser mic
*AT 4060 tube condenser mic*
EV ndymn dynamic micLike other tube mic, the AT4060 features a 7-pin cable that connects the mic to a custom power supply, and the power supply has a regular 3-pin XLR out. You will always need the power supply to use this mic, however, no additional phantom power is required.Audio-Technica’s AT4060 cardioid vacuum tube condenser brings the warmth of vintage tube sound to every shade of the SPL spectrum. With a dynamic range that far exceeds that of other tube microphones, it as easily captures the subtlest nuances of vocal and instrumental performance as it handles guitar cabinets and other extreme SPL environments. Featuring hand-selected, individually tested and aged tubes, the AT4060 achieves the coveted, classic sound of valve design without compromising the specification standards required for the most demanding recording situations. Audio-Technica takes no chances with this microphone’s consistency and reliability: every AT4060 is individually tested and inspected for 100 percent quality assurance—rare in today’s world of mass-marketed studio microphones. AT4060. Vintage sound, rock-solid reliability and amazing versatility for studio and live performance. From Audio-Technica’s premium line of 40 Series condenser microphones.ELEMENT
| Externally polarized (DC bias) condenser | |
| POLAR PATTERN | Cardioid |
| FREQUENCY RESPONSE | 20-20,000 Hz |
| OPEN CIRCUIT SENSITIVITY | -34 dB (19.9 mV) re 1V at 1 Pa |
| IMPEDANCE | 200 ohms |
| MAXIMUM INPUT SOUND LEVEL | 150 dB SPL, 1 kHz at 1% T.H.D.; 149 dB SPL, 1 kHz at 0.5% T.H.D. |
| NOISE | 19 dB SPL |
| DYNAMIC RANGE (typical) | 131 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 75 dB, 1 kHz at 1 Pa |
| POWER REQUIREMENTS | AT8560 power supply (120V/230V AC) |
| WEIGHT (MICROPHONE) | 22.6 oz (640 g) |
| WEIGHT (POWER SUPPLY) | 4.19 lbs (1.9 kg) |
| DIMENSIONS | MICROPHONE: 8.27" (210.0 mm) long, 2.10" (53.4 mm) maximum body diameter POWER SUPPLY: 8.27" (210.0 mm) W x 8.86" (225.0 mm) D x 1.73" (44.0 mm) H |
| OUTPUT CONNECTOR | XLRM-type (on power supply) |
| CABLES | 32.8' (10 m) cable with 6 pin XLR-type connectors for use between microphone and power supply; AC power supply cable |
| ACCESSORIES FURNISHED | AT8560 power supply; AT8447 shock mount for 5/8"-27 threaded stands; rack-mount adapters for power supply; protective mic carrying case |