Back to the main page Back to category Preamps and Channel Strips
musical instrument details
EXCELLENT TL Audio PA1 PENTODE PRE-AMPLIFIER
Estimated price for orientation: 799 $
Category: Preamps and Channel Strips
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: TL Audio Number of Channels: 2 Type: Microphone Preamp Features: Phantom Power, Rack-Mountable, Vacuum Tube Model: Pa-1 Dual Pentode Pre-Amplifier
This is a highly coveted PA1 PENTODE PRE-AMPLIFIER made by TL Audio in England. I recorded a few mastered CD projects with this and love it. I truly in love with the depth and clear, warm dimensionality of the tube sound. I own two of these rare units and am reluctantly making space to pay for some needed bills.
SPECIFICATIONS: Mic Input: Transformer balanced, input impedance greater than 1K5ohm, to suit 150-600 ohm microphones. 48V phantom power available, via switch. Gain range +20 to +50dB. Noise (EIN): -122Bu at maximum gain with a 150 ohm termination, measured 22Hz-22KHz unweighted. Maximum input level +6dBu. 3 pin female XLR connector. Instrument Input: Input impedance 50Kohm. Nominal sensitivity for 0dBu output -35dBu. Unbalanced jack socket input. Outputs: Electronically balanced, unbalanced compatible. Output impedance less than 10 ohms. Maximum level +26dBu into 10Kohms, +22dBu into 600 ohms. 3 pin male XLR connector. Unbalanced jack socket outputs, Impedance 47 ohms, Maximum level +20dBu into 10Kohms. Nominal output level switchable +4dBu or -10dBu. Frequency Response: 30Hz to 40KHz, +0, -2dB. LF and HF Cut Filters: Second order, 12dB per octave. Distortion: THD+N: 0.05% at 1KHz, mic input at 20dB gain, 0dBu output.
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | TL Audio |
| Number of Channels: | 2 | Type: | Microphone Preamp |
| Features: | Phantom Power, Rack-Mountable, Vacuum Tube | Model: | Pa-1 Dual Pentode Pre-Amplifier |
This is a highly coveted PA1 PENTODE PRE-AMPLIFIER made by TL Audio in England. I recorded a few mastered CD projects with this and love it. I truly in love with the depth and clear, warm dimensionality of the tube sound. I own two of these rare units and am reluctantly making space to pay for some needed bills.
SPECIFICATIONS: Mic Input: Transformer balanced, input impedance greater than 1K5ohm, to suit 150-600 ohm microphones. 48V phantom power available, via switch. Gain range +20 to +50dB. Noise (EIN): -122Bu at maximum gain with a 150 ohm termination, measured 22Hz-22KHz unweighted. Maximum input level +6dBu. 3 pin female XLR connector. Instrument Input: Input impedance 50Kohm. Nominal sensitivity for 0dBu output -35dBu. Unbalanced jack socket input. Outputs: Electronically balanced, unbalanced compatible. Output impedance less than 10 ohms. Maximum level +26dBu into 10Kohms, +22dBu into 600 ohms. 3 pin male XLR connector. Unbalanced jack socket outputs, Impedance 47 ohms, Maximum level +20dBu into 10Kohms. Nominal output level switchable +4dBu or -10dBu. Frequency Response: 30Hz to 40KHz, +0, -2dB. LF and HF Cut Filters: Second order, 12dB per octave. Distortion: THD+N: 0.05% at 1KHz, mic input at 20dB gain, 0dBu output.
SPECIFICATIONS: Mic Input: Transformer balanced, input impedance greater than 1K5ohm, to suit 150-600 ohm microphones. 48V phantom power available, via switch. Gain range +20 to +50dB. Noise (EIN): -122Bu at maximum gain with a 150 ohm termination, measured 22Hz-22KHz unweighted. Maximum input level +6dBu. 3 pin female XLR connector. Instrument Input: Input impedance 50Kohm. Nominal sensitivity for 0dBu output -35dBu. Unbalanced jack socket input. Outputs: Electronically balanced, unbalanced compatible. Output impedance less than 10 ohms. Maximum level +26dBu into 10Kohms, +22dBu into 600 ohms. 3 pin male XLR connector. Unbalanced jack socket outputs, Impedance 47 ohms, Maximum level +20dBu into 10Kohms. Nominal output level switchable +4dBu or -10dBu. Frequency Response: 30Hz to 40KHz, +0, -2dB. LF and HF Cut Filters: Second order, 12dB per octave. Distortion: THD+N: 0.05% at 1KHz, mic input at 20dB gain, 0dBu output.