Back to the main page Back to category Signal Processors or Rack Effect
musical instrument details
WAVES MAXX BCL (Bass Enhancement, Compressor, L2 Limiter) OUTBOARD PROCESSOR
Estimated price for orientation: 3 150 $
Category: Signal Processors or Rack Effect
Class:
Description Condition: Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Type: Dynamic Range Processor Form Factor: Rack-Mountable Effect/Enhancement: Compression/Limiting, Harmonic Enhancement Number of Channels: 2 Model: MAXX BCL Brand: Waves
Selling my WAVES MAXX BCL. This is the hardware box with a Digital Compressor, Bass Enhancement and L2 Limiter. Sounds beautiful. One owner, non smoking mastering studio. Ships with manual, power cable and original box (purchased from VK a couple of years ago).
Serial #: 33821TGMKY5630These sell new for $3680 - selling mine for $3150.00 (MAKE AN OFFER!)** Free shipping US only - will ship International (US Priority International for a fee).*** PayPal Only, Verified Buyers
WAVES MaxxBCL Hardware Processor Unit
Input / Output
Analog, AES/EBU, SPDIF
Independent rear panel input and output headroom calibration in 6 steps (+9, 12, 15, 18, 20 and 24 dBu)
Passive analog inputs to the A to D converters
Waves analog input transformers
Waves analog output transformers
High performance IDR dithering to 16 or 24 bit output
Precise input level setting using 1% resistor networks Processing
48 bit end-to-end internal processing path
Switchable compressor/MaxxBass® order Compressor
Opto/Electro mode selection
Threshold (0-60dB), Ratio (1:1-12:1) and Attack (0.5, 1, 2, 5, 10, 20, and 50 ms) controls
Proprietary ARC™ Automatic Release Control
Automatic gain makeup. MaxxBass®
Adjustable processor frequency from 25Hz to 120Hz
Adjustable harmonic mix percentage from 0 to 100%
High Pass Filter "harmonics only" option Limiter
Overshoot-free Look-ahead processing
Adjustable Threshold (0-18dB)
Adjustable Output Ceiling (0-18dBFS) Dimensions
Length: 48.3cm / 19 inches
Height: 8.6 cm / 3.4 inches
Depth: 24.7 cm / 9.75 inches
Analog input stage:
Maximum Analog Input Gain: 24 dBu
Input Impedance, Balanced Input: 32 kOhm@1kHz Analog output stage:
Maximum Output: +24dBu
Output Impedance 600 Ω ADC (@44.1kHz):
Frequency response: 10Hz - 24 kHz / -0.1dB@10Hz / 0.01@24k
THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS
THD 3rd Harmonic: -126 dBFS @1kHz, -10dBFS DAC (@44.1kHz):
Frequency response: 20Hz-21kHz / - 0.4dB@20Hz / 0.05dB@21kHz
Noise: ≤ -108 dB (unweighted)
THD+Noise: ≤ 0.003% @1kHz, -1dBFS
Maximum Output: +24dBu
Output Impedance: 600 ohms @ 1kHz
Crosstalk: ≤ -102 dB (1kHz, 0 dBFS)
THD+N: ≤ 0.003% @ 1kHz un-weighted
Frequency response: -0.4 dB@20Hz / 0.05 @ 21kHz Latency (in samples):
Digital to Digital: 133 @44.1, 48kHz, 261 @88.2, 96kHz
Analog to Digital: 176 @44.1, 48kHz, 301 @88.2, 96kHz
Digital to Analog: 182 @44.1, 48kHz, 313 @88.2, 96kHz
Analog to Analog: 225 @44.1, 48kHz, 353 @88.2, 96kHz User Interface
Clear backlit displays, meters and buttons are visible in all lighting conditions
THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS
Precision Metering with resettable peak hold options (2 sec, infinite)
Accurate, wide range metering covering 90dB for input and output and 12dB for compressor and limiter attenuation
Quick access independent bypass on each processing block
Tactile feedback knobs
4 easy store/recall user presets
Description
| Condition: | Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Type: | Dynamic Range Processor |
| Form Factor: | Rack-Mountable | Effect/Enhancement: | Compression/Limiting, Harmonic Enhancement |
| Number of Channels: | 2 | Model: | MAXX BCL |
| Brand: | Waves |
Selling my WAVES MAXX BCL. This is the hardware box with a Digital Compressor, Bass Enhancement and L2 Limiter. Sounds beautiful. One owner, non smoking mastering studio. Ships with manual, power cable and original box (purchased from VK a couple of years ago).
Serial #: 33821TGMKY5630These sell new for $3680 - selling mine for $3150.00 (MAKE AN OFFER!)** Free shipping US only - will ship International (US Priority International for a fee).*** PayPal Only, Verified Buyers
WAVES MaxxBCL Hardware Processor Unit
Input / Output
Analog, AES/EBU, SPDIF
Independent rear panel input and output headroom calibration in 6 steps (+9, 12, 15, 18, 20 and 24 dBu)
Passive analog inputs to the A to D converters
Waves analog input transformers
Waves analog output transformers
High performance IDR dithering to 16 or 24 bit output
Precise input level setting using 1% resistor networks Processing
48 bit end-to-end internal processing path
Switchable compressor/MaxxBass® order Compressor
Opto/Electro mode selection
Threshold (0-60dB), Ratio (1:1-12:1) and Attack (0.5, 1, 2, 5, 10, 20, and 50 ms) controls
Proprietary ARC™ Automatic Release Control
Automatic gain makeup. MaxxBass®
Adjustable processor frequency from 25Hz to 120Hz
Adjustable harmonic mix percentage from 0 to 100%
High Pass Filter "harmonics only" option Limiter
Overshoot-free Look-ahead processing
Adjustable Threshold (0-18dB)
Adjustable Output Ceiling (0-18dBFS) Dimensions
Length: 48.3cm / 19 inches
Height: 8.6 cm / 3.4 inches
Depth: 24.7 cm / 9.75 inches
Serial #: 33821TGMKY5630These sell new for $3680 - selling mine for $3150.00 (MAKE AN OFFER!)** Free shipping US only - will ship International (US Priority International for a fee).*** PayPal Only, Verified Buyers
WAVES MaxxBCL Hardware Processor Unit
Input / Output
Analog, AES/EBU, SPDIF
Independent rear panel input and output headroom calibration in 6 steps (+9, 12, 15, 18, 20 and 24 dBu)
Passive analog inputs to the A to D converters
Waves analog input transformers
Waves analog output transformers
High performance IDR dithering to 16 or 24 bit output
Precise input level setting using 1% resistor networks Processing
48 bit end-to-end internal processing path
Switchable compressor/MaxxBass® order Compressor
Opto/Electro mode selection
Threshold (0-60dB), Ratio (1:1-12:1) and Attack (0.5, 1, 2, 5, 10, 20, and 50 ms) controls
Proprietary ARC™ Automatic Release Control
Automatic gain makeup. MaxxBass®
Adjustable processor frequency from 25Hz to 120Hz
Adjustable harmonic mix percentage from 0 to 100%
High Pass Filter "harmonics only" option Limiter
Overshoot-free Look-ahead processing
Adjustable Threshold (0-18dB)
Adjustable Output Ceiling (0-18dBFS) Dimensions
Length: 48.3cm / 19 inches
Height: 8.6 cm / 3.4 inches
Depth: 24.7 cm / 9.75 inches
Analog input stage:
Maximum Analog Input Gain: 24 dBu
Input Impedance, Balanced Input: 32 kOhm@1kHz Analog output stage:
Maximum Output: +24dBu
Output Impedance 600 Ω ADC (@44.1kHz):
Frequency response: 10Hz - 24 kHz / -0.1dB@10Hz / 0.01@24k
THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS
THD 3rd Harmonic: -126 dBFS @1kHz, -10dBFS DAC (@44.1kHz):
Frequency response: 20Hz-21kHz / - 0.4dB@20Hz / 0.05dB@21kHz
Noise: ≤ -108 dB (unweighted)
THD+Noise: ≤ 0.003% @1kHz, -1dBFS
Maximum Output: +24dBu
Output Impedance: 600 ohms @ 1kHz
Crosstalk: ≤ -102 dB (1kHz, 0 dBFS)
THD+N: ≤ 0.003% @ 1kHz un-weighted
Frequency response: -0.4 dB@20Hz / 0.05 @ 21kHz Latency (in samples):
Digital to Digital: 133 @44.1, 48kHz, 261 @88.2, 96kHz
Analog to Digital: 176 @44.1, 48kHz, 301 @88.2, 96kHz
Digital to Analog: 182 @44.1, 48kHz, 313 @88.2, 96kHz
Analog to Analog: 225 @44.1, 48kHz, 353 @88.2, 96kHz User Interface
Clear backlit displays, meters and buttons are visible in all lighting conditions
THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS
Precision Metering with resettable peak hold options (2 sec, infinite)
Accurate, wide range metering covering 90dB for input and output and 12dB for compressor and limiter attenuation
Quick access independent bypass on each processing block
Tactile feedback knobs
4 easy store/recall user presets
Maximum Analog Input Gain: 24 dBu
Input Impedance, Balanced Input: 32 kOhm@1kHz Analog output stage:
Maximum Output: +24dBu
Output Impedance 600 Ω ADC (@44.1kHz):
Frequency response: 10Hz - 24 kHz / -0.1dB@10Hz / 0.01@24k
THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS
THD 3rd Harmonic: -126 dBFS @1kHz, -10dBFS DAC (@44.1kHz):
Frequency response: 20Hz-21kHz / - 0.4dB@20Hz / 0.05dB@21kHz
Noise: ≤ -108 dB (unweighted)
THD+Noise: ≤ 0.003% @1kHz, -1dBFS
Maximum Output: +24dBu
Output Impedance: 600 ohms @ 1kHz
Crosstalk: ≤ -102 dB (1kHz, 0 dBFS)
THD+N: ≤ 0.003% @ 1kHz un-weighted
Frequency response: -0.4 dB@20Hz / 0.05 @ 21kHz Latency (in samples):
Digital to Digital: 133 @44.1, 48kHz, 261 @88.2, 96kHz
Analog to Digital: 176 @44.1, 48kHz, 301 @88.2, 96kHz
Digital to Analog: 182 @44.1, 48kHz, 313 @88.2, 96kHz
Analog to Analog: 225 @44.1, 48kHz, 353 @88.2, 96kHz User Interface
Clear backlit displays, meters and buttons are visible in all lighting conditions
THD + Noise: ≤ 0.0006 % @ 1kHz @ -1dBFS
Precision Metering with resettable peak hold options (2 sec, infinite)
Accurate, wide range metering covering 90dB for input and output and 12dB for compressor and limiter attenuation
Quick access independent bypass on each processing block
Tactile feedback knobs
4 easy store/recall user presets