Excellent condition. Installed in one location, never toured. Please check our feedback and let us know if you have any questions.Ships via FedEx same/next day.Designed with touring sound professionals in mind, the Crest Pro 200 Series power amplifiers faithfully produce high power with low distortion in an extremely lightweight economical package.Rock stable in stereo or bridged mode operation this series is engineered to exceed expectations, when powering multiple or single loudspeaker enclosures down to a 2 ohm load.The Pro 200 Series offer the protection that ensures safe & trouble free shows night after night.Design Focus
The Pro 200 Series professional power amplifiers offer Crest's renowned sonic integrity while providing exceptionally high power ratings in a compact, lightweight (under 25 lbs.) 2U package.The Pro 200 Series amps feature Automatic Clip Limiting (ACL) to protect connected drivers; IGM Impedance Sensing to accommodate varying impedance outputs; tunnel-cooled, high efficiency heat sinksl and veriable-speed DC fans to limit the operating temperature and extend amplifier life.Pro-9200 Features:8 Ohm Stereo - 1300 W4 Ohm Stereo - 2200 W2 Ohm Stereo - 3250 W8 Ohm Bridged - 6500 WPowerLock™ technologyDramatically reduced net weightLatest generation of high speed, wide-bandwidthoutput devicesTwin-tunnel cooling with back-to-front air flowDual, rear-mounted, continuous variable-speed fansBalanced male and femal XLR inputs withswitch-configurable XLR polarity and sensitivity selectionSpeakon® and five-way binding post output connectorsGround-lift switchFront panel circuit breaker switchModular constructionDimensions (W x H x D): 19" x 3.5" x 12.25" (483 x 89x 312 mm)Weight: 24.1 lbs. (11 kg)Model: Pro 9200
Power Rating: 8 Ohms Stereo - 1300 W; 4 Ohms Stereo - 2200 W; 2 Ohms Stereo - 3250 W; 8 Ohms Bridged - 4,400 W; 4 Ohms bridged - 6500 W
(8 Ohms and 4 Ohms Stereo Power ratings @1kHz, <0.05% THD+N both channels driven; 2 Ohms s stereo & 4 Ohms s Bridged Mono Power ratings @1 kHz, <0.1%THD+N)
Output Voltage RMS: 113V
Frequency Response:10 Hz ” 100 kHz; +0, -2 dB at 1 watt
Power Bandwidth:
10 Hz ” 35 kHz; +0, -2 dB at rated 4 Ohms power
Damping factor: >300:1 8 Ohms s @ 20 Hz to 1kHz
Input CMRR: > -85 dB @1kHz
Gain: selectable between x 40 (32 dB) and x 20 (26 dB)
Input Sensitivity (x 40) 4 Ohms rated power ±3%: 2.35 V
Input Impedance: 15 kohms Balanced
Hum and Noise A-weighted @ 8 Ohms rated power: >-113 dB
Crosstalk 1kHz @ 8 Ohms rated power: >-70 dB
Class: H
Power Supply: Switched Mode
Current Draw @ 120 VAC: 1/8 power 4 Ohms : 2,200 W 18.4 A; 2 Ohms 3,350 W 27.9 A; 1/3 power 4 Ohms : 5,000 W 41.7 A 2 Ohms ; 7,300 W 60.9 A
Thermal Emissions: 1/3 power, 4 Ohms Bridged BTU/hr: 24,909
Cooling: Back to front via 2 variable speed fans
Input connectors: Balanced female XLR
Output connectors: Speakon connectors and five-way binding post
Controls
Front panel: twin recessed stepped attenuators, circuit breaker/power switch
Rear panel: mode select, gain select
LED indicators: Signal presence, ACL (Active clip limiting), Active status, Temp
Construction: Aluminum Chassis
Dimensions( W x H x D): 19" x 3.5" x 12.25" - 13.75" to rack ears, (483 mm x 89 mm x 312 mm - 13.75" to rack ears)
Weight: 24.1 lbs. (11 kg)