Back to the main page Back to category ElectroHarmonix
musical instrument details
NEW Electro Harmonix Switchblade + Plus Channel Selector Guitar Pedal w/ 9V Batt
Estimated price for orientation: 999 $
Category: ElectroHarmonix
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Electro-Harmonix MPN: SWITCHBLADE+ Model: Switchblade+ UPC: 683274011219
NEW Electro Harmonix Switchblade + Plus Channel Selector Guitar Pedal w/ 9V Batt
The Switchblade+ offers a convenient solution to a player’s switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.Quick Specs Route your signal to output A or output B or both simultaneously Easily switch between different pedal boards The tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit The audio path is completely passive The Switchblade Plus can be powered by a 9 volt battery or 9VDC eliminator Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h) Dimensions in mm: 70 (w) x 115 (l) x 54 (h)
— Controls —
A/B Footswitch (LED) — Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED). A+B Footswitch (LED) — Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path. — I/O —
INPUT — Connect the output of your instrument or another effects pedal to this jack. TUNER — Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit. OUT A — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected. OUT B — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected. — Power -
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Bossâ® & Ibanezâ®) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative. The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function. When A+B is engaged, the input impedance at the INPUT jack is equal to 50kî© in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100kî© in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Electro-Harmonix |
| MPN: | SWITCHBLADE+ | Model: | Switchblade+ |
| UPC: | 683274011219 |
NEW Electro Harmonix Switchblade + Plus Channel Selector Guitar Pedal w/ 9V Batt
The Switchblade+ offers a convenient solution to a player’s switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.Quick Specs
— Controls —
A/B Footswitch (LED) — Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED). A+B Footswitch (LED) — Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path. — I/O —
INPUT — Connect the output of your instrument or another effects pedal to this jack. TUNER — Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit. OUT A — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected. OUT B — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected. — Power -
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Bossâ® & Ibanezâ®) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative. The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function. When A+B is engaged, the input impedance at the INPUT jack is equal to 50kî© in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100kî© in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.
The Switchblade+ offers a convenient solution to a player’s switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.Quick Specs
Route your signal to output A or output B or both simultaneously Easily switch between different pedal boards The tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit The audio path is completely passive The Switchblade Plus can be powered by a 9 volt battery or 9VDC eliminator Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h) Dimensions in mm: 70 (w) x 115 (l) x 54 (h)
— Controls —
A/B Footswitch (LED) — Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED). A+B Footswitch (LED) — Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path. — I/O —
INPUT — Connect the output of your instrument or another effects pedal to this jack. TUNER — Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit. OUT A — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected. OUT B — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected. — Power -
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Bossâ® & Ibanezâ®) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative. The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function. When A+B is engaged, the input impedance at the INPUT jack is equal to 50kî© in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100kî© in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.