Back to the main page Back to category ElectroHarmonix
musical instrument details
NEW Electro Harmonix Nano LPB-1 Linear Power Booster Preamp Pedal Guitar Boost
Estimated price for orientation: 999 $
Category: ElectroHarmonix
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Electro-Harmonix MPN: LPB-1 Model: Linear Power Booster UPC: 683274010588
NEW Electro Harmonix LPB-1 Linear Power Booster Preamp Pedal Guitar Boost 9V
An exact recreation of the original LPB-1 circuit that ushered in the age of overdrive in 1968. Put the LPB-1 in line with any effect to provide boost and definition. Improve the gain and saturation of your amp.Quick Specs True bypass Tough and compact die-cast chassis 9-volt battery included Optional 96DC-200BI power supply available Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h) Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h)
-CONTROLS- BOOST CONTROL- Adjusts the amount of boost. FOOTSWITCH- Engages and disengages the effect. When the LED is on the pedal is engaged. When off, it is in True Bypass mode. -OPERATION AND WARNINGS- Power, from the internal 9-volt battery or external battery eliminator, is activated by plugging into the input. The input cable should be removed when the unit is not in use to avoid running down the battery. The input impedance presented at the Input Jack is 43 kohms. The output impedance at the Output Jack is 10 kohms. The barrel connector on the front of LPB-1 is for a 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use. To change the 9-volt battery, you must remove the 4 screws on the bottom of the LPB-1. Once the screws are removed, you can take off the bottom plate and change the battery. Please do not touch the circuit board while the bottom plate is off or you may damage a component. The optional 9V power supply from Electro-Harmonix is US96DC-200BI (same as used by Boss (tm) & Ibanez(tm)) 9.6 volts/DC 200ma. The barrel connector on the front of the LPB-1 is for the 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Electro-Harmonix |
| MPN: | LPB-1 | Model: | Linear Power Booster |
| UPC: | 683274010588 |
NEW Electro Harmonix LPB-1 Linear Power Booster Preamp Pedal Guitar Boost 9V
An exact recreation of the original LPB-1 circuit that ushered in the age of overdrive in 1968. Put the LPB-1 in line with any effect to provide boost and definition. Improve the gain and saturation of your amp.Quick Specs
-CONTROLS- BOOST CONTROL- Adjusts the amount of boost. FOOTSWITCH- Engages and disengages the effect. When the LED is on the pedal is engaged. When off, it is in True Bypass mode. -OPERATION AND WARNINGS- Power, from the internal 9-volt battery or external battery eliminator, is activated by plugging into the input. The input cable should be removed when the unit is not in use to avoid running down the battery. The input impedance presented at the Input Jack is 43 kohms. The output impedance at the Output Jack is 10 kohms. The barrel connector on the front of LPB-1 is for a 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use. To change the 9-volt battery, you must remove the 4 screws on the bottom of the LPB-1. Once the screws are removed, you can take off the bottom plate and change the battery. Please do not touch the circuit board while the bottom plate is off or you may damage a component. The optional 9V power supply from Electro-Harmonix is US96DC-200BI (same as used by Boss (tm) & Ibanez(tm)) 9.6 volts/DC 200ma. The barrel connector on the front of the LPB-1 is for the 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use.
An exact recreation of the original LPB-1 circuit that ushered in the age of overdrive in 1968. Put the LPB-1 in line with any effect to provide boost and definition. Improve the gain and saturation of your amp.Quick Specs
True bypass Tough and compact die-cast chassis 9-volt battery included Optional 96DC-200BI power supply available Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h) Dimensions in inches: 2.75 (w) x 4.5 (l) x 2.1 (h)
-CONTROLS- BOOST CONTROL- Adjusts the amount of boost. FOOTSWITCH- Engages and disengages the effect. When the LED is on the pedal is engaged. When off, it is in True Bypass mode. -OPERATION AND WARNINGS- Power, from the internal 9-volt battery or external battery eliminator, is activated by plugging into the input. The input cable should be removed when the unit is not in use to avoid running down the battery. The input impedance presented at the Input Jack is 43 kohms. The output impedance at the Output Jack is 10 kohms. The barrel connector on the front of LPB-1 is for a 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use. To change the 9-volt battery, you must remove the 4 screws on the bottom of the LPB-1. Once the screws are removed, you can take off the bottom plate and change the battery. Please do not touch the circuit board while the bottom plate is off or you may damage a component. The optional 9V power supply from Electro-Harmonix is US96DC-200BI (same as used by Boss (tm) & Ibanez(tm)) 9.6 volts/DC 200ma. The barrel connector on the front of the LPB-1 is for the 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may be left in or taken out when the eliminator is in use.