Back to the main page Back to category Other TV Video and Audio Accs
musical instrument details
Visioneer TC2-MATRIXRX - VISION TECHCONNECT MATRIX HDMI-OVER-IP RECEIVER Con...
Estimated price for orientation: 1 674 $
Category: Other TV Video and Audio Accs
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Visioneer EAN: 2869194000009 Manufacturer: Visioneer Quick Code: 2869194 MPN: TC2-MATRIXRX
Highlights Designed for video signage applications the Techconnect Matrix allows distribution of HDMI content over an existing managed LAN infrastructure. Because of this the cost of deployment is radically lower than bespoke AV distribution systems.Matrix Modes
Supports point-to-point, point-to-multiple, and multiple-to-multiple matrixing.MJPEG Compression
It converts the video into TCP/IP packets using proprietary MPEG compression. The audio and vision are compressed together ensuring no delay issues at the receiver which may lead to out-of-sync audio on a busy network.3rd Generation Chipset
The latest generation processing chips offer smooth, latency-free transmission without using too much valuable bandwidth on a network. Techconnect Matrix is optimised to work on a Gigabit network. Bandwidth requirement is 150Mbps @1080p 60Hz (720p@60Hz: 41-67Mbps).Scaleable
Whether you need a small system or a large system; just buy what you need. Transmitters and receivers are sold separately.RS-232
Not only can it distribute video and audio; it can also RS-232 transmit 2-way control signal to the display devices.Cascading Network Switches
The signal can be transmitted to any point on the LAN through any number of network switches. Or two devices can bypass the LAN and connect directly to each other. Note: used in this way the devices still need addressing during installation.HDCP Compliant
Techconnect Matrix supports HDMI 1.3 with full HDCP compliance.Power Over Ethernet
A power supply is included for each node, but the transmitters and receivers can also use standard Power Over Ethernet (PoE) to operate. Many network switches output PoE, or injectors can be fitted to a network to add PoE to a network.Software Included
Vision include simple setup software to address the devices on a managed network and route content.Control Interface
Vision offers a bridge device which connects to the same network as the transmitters and receivers and allows 3rd party control. Provides a built-in web server and Telnet API. Note: this product requires advanced networking and programming skills. Specifications Technical details Type Receiver Maximum resolution 1920 x 1200 pixels Maximum transfer distance 100 m Supported video modes 1080p, 720p Bandwidth 0.15 Gbit/s Video compression formats M-JPEG Wireless connection Colour of product White RoHS compliance Certification WEEE, CE/EMC
Ports & interfaces RJ-45 input ports 1 HDMI out 1 HDMI version 1.3 RS-232 output ports 1 DC-in jack
Indication LED indicators
Operational conditions Operating temperature (T-T) -5 - 35 °C Operating relative humidity (H-H) 5 - 90%
Power AC input voltage 100-240 V AC input frequency 50/60 Hz Operating voltage 12 V Power consumption (typical) 5 W Current 2 A
Weight & dimensions Receiver dimensions (WxDxH) 115 x 26 x 141 mm Receiver weight 440 g Package dimensions (WxDxH) 140 x 65 x 265 mm Package weight 820 g
About Us Tradition for quality LambdaTek started in 2001 with the purpose of providing services to the opto-electronics manufacturing industry, including state of the art simulation software as well as hardware tools specifically designed to run computationally and graphically intensive calculations. Following the success of our services and encouraged by our loyal customer base, in 2004 LambdaTek extended its services by launching the most comprehensive online shop for all technology requirements, proposing extremely aggressive prices on electronic hardware and software products with the aim of providing a level of service surpassing that of high street stores. Comprehensive product line Leveraging on LambdaTek’s tradition of high quality of service and loyal customer base, the Component Shop has seen its trade volume increase to the point of enabling LambdaTek to extend its strategic alliances with reseller partners and manufacturers. As a consequence LambdaTek is now pleased to offer a vastly increased catalogue comprising of more than 50,000 products, placing LambdaTek firmly among the largest electronic e-stores on the web. Aggressive pricing Product prices are constantly monitored by active market research aided by dedicated in-house technology, allowing us to bring the best deals to you, the customer. This has helped establish LambdaTek's reputation as the best value one-stop store for both consumers and corporate businesses alike. Delivery How will I know when my order has been dispatched As soon as your order is dispatched from our warehouse you will be send an email to confirm that it is on its way. We aim to dispatch all next day delivery orders placed before 4pm on the same day, subject to availability. How long will it take for me to get my order? It depends on the delivery service. For next day delivery, all orders are sent by next day courier, we will send a tracking link and the courier should contact you with a delivery slot. For economy delivery, this may take up to 3-5 working days. What do I do if I have not received my order when expected? For orders sent by courier, please check your tracking details and contact the courier to trace your parcel. Please note that couriers can deliver up until 7pm. If there is still a problem, please contact customer services on componentshop@lambda-tek.com or +44 (0)1865 791055 (9.30am-5.30pm). What if there is an item missing or damaged? Some orders may be dispatched from different warehouses to be with you as soon as possible. If you have an item missing from your order or damaged please contact customer services on componentshop@lambda-tek.com or +44 (0)1865 791055 (9.30am-5.30pm). What happens if I am not at home to accept my delivery? With DPD you can select the most convenient day for the parcel to arrive, and on the morning they will tell you your one hour delivery window to make waiting in for a delivery a thing of the past. (this only available with the next day service) if it is not convenient you can use the text or email to change it. You can check your delivery window or check the progress of your parcel on the courier website as given in the dispatch email. If you are unavailable, the courier should leave a calling card and take the parcel back to your local depot. The delivery should then be automatically attempted the next day. If delivery is still unsuccessful then your parcel will be held until you contact teh courier to rearrange the delivery on a more convenient day or you can collect the parcel from your local depot. If delivery has been unsuccessful after approximately 5 days and the courier has been unable to contact you, the parcel will be returned to us. Do you deliver to PO boxes, BFPO? Sadly we cannot currently deliver to any of the above. We are working with our courier services to try and provide safe and secure delivery in the near future. Returns If you change your mind (Does not apply to Auctions) If you have bought goods online and have changed your mind and want to return them, then you can do so within 7 working days, starting the day after delivery. To return goods, you must first get an RMA number. To obtain an RMA number contact customer services, the easiest and most efficient way is to use an online request by emailing or calling +44 (0)1865 791055 (9.30am-5.30pm). Please put this RMA number on the LambdaTek Returns Form and include it in your parcel. Once received we will refund the price paid. The item must not be used and must be in original packaging and in a condition reflecting your duty of care. Once the RMA has been given you must return the goods within the time specified by our returns team at your own expense.
If you can't print the Returns form, don't worry, just write your name, address, RMA number and why you are returning the item on a piece of paper and include it in your parcel.
It speeds things up if you can write your RMA number clearly on the outside of your parcel. If an item is faulty within warranty period If anything you have bought develops a fault within the warranty period, then the first thing to do is contact our Technical Support for help at or on +44 (0)1865 791055 (9.30am-5.30pm). They may be able to solve the problem straightaway, and if not will advise you further.
If you then return the item and it is diagnosed faulty by our technicians, we will do our best to provide a replacement or repair as soon as possible.
If it isn't in stock, we will replace it as soon as we can. If we test it and there is no fault, then we will return the item to you, and you will have to pay the return postage.
If the goods are faulty within 30 days we will offer the option of a full refund on the condition that the item is returned in the original condition that you received it. However, certain high value goods can only be refunded if it is returned within 7 days. Business customers:
Please note that the 30 day period above is reduced to 14 days for business customers and the 7 working day return under the Distance Selling Regulations does not apply.
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Visioneer |
| EAN: | 2869194000009 | Manufacturer: | Visioneer |
| Quick Code: | 2869194 | MPN: | TC2-MATRIXRX |
Highlights Designed for video signage applications the Techconnect Matrix allows distribution of HDMI content over an existing managed LAN infrastructure. Because of this the cost of deployment is radically lower than bespoke AV distribution systems.Matrix Modes
Supports point-to-point, point-to-multiple, and multiple-to-multiple matrixing.MJPEG Compression
It converts the video into TCP/IP packets using proprietary MPEG compression. The audio and vision are compressed together ensuring no delay issues at the receiver which may lead to out-of-sync audio on a busy network.3rd Generation Chipset
The latest generation processing chips offer smooth, latency-free transmission without using too much valuable bandwidth on a network. Techconnect Matrix is optimised to work on a Gigabit network. Bandwidth requirement is 150Mbps @1080p 60Hz (720p@60Hz: 41-67Mbps).Scaleable
Whether you need a small system or a large system; just buy what you need. Transmitters and receivers are sold separately.RS-232
Not only can it distribute video and audio; it can also RS-232 transmit 2-way control signal to the display devices.Cascading Network Switches
The signal can be transmitted to any point on the LAN through any number of network switches. Or two devices can bypass the LAN and connect directly to each other. Note: used in this way the devices still need addressing during installation.HDCP Compliant
Techconnect Matrix supports HDMI 1.3 with full HDCP compliance.Power Over Ethernet
A power supply is included for each node, but the transmitters and receivers can also use standard Power Over Ethernet (PoE) to operate. Many network switches output PoE, or injectors can be fitted to a network to add PoE to a network.Software Included
Vision include simple setup software to address the devices on a managed network and route content.Control Interface
Vision offers a bridge device which connects to the same network as the transmitters and receivers and allows 3rd party control. Provides a built-in web server and Telnet API. Note: this product requires advanced networking and programming skills.
Supports point-to-point, point-to-multiple, and multiple-to-multiple matrixing.MJPEG Compression
It converts the video into TCP/IP packets using proprietary MPEG compression. The audio and vision are compressed together ensuring no delay issues at the receiver which may lead to out-of-sync audio on a busy network.3rd Generation Chipset
The latest generation processing chips offer smooth, latency-free transmission without using too much valuable bandwidth on a network. Techconnect Matrix is optimised to work on a Gigabit network. Bandwidth requirement is 150Mbps @1080p 60Hz (720p@60Hz: 41-67Mbps).Scaleable
Whether you need a small system or a large system; just buy what you need. Transmitters and receivers are sold separately.RS-232
Not only can it distribute video and audio; it can also RS-232 transmit 2-way control signal to the display devices.Cascading Network Switches
The signal can be transmitted to any point on the LAN through any number of network switches. Or two devices can bypass the LAN and connect directly to each other. Note: used in this way the devices still need addressing during installation.HDCP Compliant
Techconnect Matrix supports HDMI 1.3 with full HDCP compliance.Power Over Ethernet
A power supply is included for each node, but the transmitters and receivers can also use standard Power Over Ethernet (PoE) to operate. Many network switches output PoE, or injectors can be fitted to a network to add PoE to a network.Software Included
Vision include simple setup software to address the devices on a managed network and route content.Control Interface
Vision offers a bridge device which connects to the same network as the transmitters and receivers and allows 3rd party control. Provides a built-in web server and Telnet API. Note: this product requires advanced networking and programming skills.
Specifications
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
About Us Tradition for quality LambdaTek started in 2001 with the purpose of providing services to the opto-electronics manufacturing industry, including state of the art simulation software as well as hardware tools specifically designed to run computationally and graphically intensive calculations. Following the success of our services and encouraged by our loyal customer base, in 2004 LambdaTek extended its services by launching the most comprehensive online shop for all technology requirements, proposing extremely aggressive prices on electronic hardware and software products with the aim of providing a level of service surpassing that of high street stores. Comprehensive product line Leveraging on LambdaTek’s tradition of high quality of service and loyal customer base, the Component Shop has seen its trade volume increase to the point of enabling LambdaTek to extend its strategic alliances with reseller partners and manufacturers. As a consequence LambdaTek is now pleased to offer a vastly increased catalogue comprising of more than 50,000 products, placing LambdaTek firmly among the largest electronic e-stores on the web. Aggressive pricing Product prices are constantly monitored by active market research aided by dedicated in-house technology, allowing us to bring the best deals to you, the customer. This has helped establish LambdaTek's reputation as the best value one-stop store for both consumers and corporate businesses alike.
Delivery How will I know when my order has been dispatched As soon as your order is dispatched from our warehouse you will be send an email to confirm that it is on its way. We aim to dispatch all next day delivery orders placed before 4pm on the same day, subject to availability. How long will it take for me to get my order? It depends on the delivery service. For next day delivery, all orders are sent by next day courier, we will send a tracking link and the courier should contact you with a delivery slot. For economy delivery, this may take up to 3-5 working days. What do I do if I have not received my order when expected? For orders sent by courier, please check your tracking details and contact the courier to trace your parcel. Please note that couriers can deliver up until 7pm. If there is still a problem, please contact customer services on componentshop@lambda-tek.com or +44 (0)1865 791055 (9.30am-5.30pm). What if there is an item missing or damaged? Some orders may be dispatched from different warehouses to be with you as soon as possible. If you have an item missing from your order or damaged please contact customer services on componentshop@lambda-tek.com or +44 (0)1865 791055 (9.30am-5.30pm). What happens if I am not at home to accept my delivery? With DPD you can select the most convenient day for the parcel to arrive, and on the morning they will tell you your one hour delivery window to make waiting in for a delivery a thing of the past. (this only available with the next day service) if it is not convenient you can use the text or email to change it. You can check your delivery window or check the progress of your parcel on the courier website as given in the dispatch email. If you are unavailable, the courier should leave a calling card and take the parcel back to your local depot. The delivery should then be automatically attempted the next day. If delivery is still unsuccessful then your parcel will be held until you contact teh courier to rearrange the delivery on a more convenient day or you can collect the parcel from your local depot. If delivery has been unsuccessful after approximately 5 days and the courier has been unable to contact you, the parcel will be returned to us. Do you deliver to PO boxes, BFPO? Sadly we cannot currently deliver to any of the above. We are working with our courier services to try and provide safe and secure delivery in the near future.
Returns If you change your mind (Does not apply to Auctions) If you have bought goods online and have changed your mind and want to return them, then you can do so within 7 working days, starting the day after delivery. To return goods, you must first get an RMA number. To obtain an RMA number contact customer services, the easiest and most efficient way is to use an online request by emailing or calling +44 (0)1865 791055 (9.30am-5.30pm). Please put this RMA number on the LambdaTek Returns Form and include it in your parcel. Once received we will refund the price paid. The item must not be used and must be in original packaging and in a condition reflecting your duty of care. Once the RMA has been given you must return the goods within the time specified by our returns team at your own expense.
If you can't print the Returns form, don't worry, just write your name, address, RMA number and why you are returning the item on a piece of paper and include it in your parcel.
It speeds things up if you can write your RMA number clearly on the outside of your parcel. If an item is faulty within warranty period If anything you have bought develops a fault within the warranty period, then the first thing to do is contact our Technical Support for help at or on +44 (0)1865 791055 (9.30am-5.30pm). They may be able to solve the problem straightaway, and if not will advise you further.
If you then return the item and it is diagnosed faulty by our technicians, we will do our best to provide a replacement or repair as soon as possible.
If it isn't in stock, we will replace it as soon as we can. If we test it and there is no fault, then we will return the item to you, and you will have to pay the return postage.
If the goods are faulty within 30 days we will offer the option of a full refund on the condition that the item is returned in the original condition that you received it. However, certain high value goods can only be refunded if it is returned within 7 days. Business customers:
Please note that the 30 day period above is reduced to 14 days for business customers and the 7 working day return under the Distance Selling Regulations does not apply.
If you can't print the Returns form, don't worry, just write your name, address, RMA number and why you are returning the item on a piece of paper and include it in your parcel.
It speeds things up if you can write your RMA number clearly on the outside of your parcel. If an item is faulty within warranty period If anything you have bought develops a fault within the warranty period, then the first thing to do is contact our Technical Support for help at or on +44 (0)1865 791055 (9.30am-5.30pm). They may be able to solve the problem straightaway, and if not will advise you further.
If you then return the item and it is diagnosed faulty by our technicians, we will do our best to provide a replacement or repair as soon as possible.
If it isn't in stock, we will replace it as soon as we can. If we test it and there is no fault, then we will return the item to you, and you will have to pay the return postage.
If the goods are faulty within 30 days we will offer the option of a full refund on the condition that the item is returned in the original condition that you received it. However, certain high value goods can only be refunded if it is returned within 7 days. Business customers:
Please note that the 30 day period above is reduced to 14 days for business customers and the 7 working day return under the Distance Selling Regulations does not apply.