Back to the main page Back to category Other Musical Instruments
musical instrument details
Yamaha EMX2 500W / EMX5 1260Watt Powered Amplified Mixer NEW l Authorized Dealer
Estimated price for orientation: 449 $
Category: Other Musical Instruments
Class:
Description Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Brand: Yamaha Package Included 2: AC Power Cord MPN: EMX2 / EMX5 Package Included 3: Manufacturer 1-Year Warranty Package Included 1: Yamaha EMX2 or EMX5 Powered Mixer
Yamaha EMX 2 10-Channel 500W Powered Amplified Mixer - USA Authorized Dealer!Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.Despite being a mixer and an amplifier in a single unit, the EMX2's dimensions (37.5cm x 22cm x 15cm / 14.8" x 5.8" x 8.7") are surprisingly modest, making it easy to fit along with speakers even in the trunk of a small car. The lightweight body also features handles for a superior level of portability that will benefit anyone setting up a PA for applications where time is a consideration.Key Features500 watt power amplifier for versatility in a wide variety of performance applications10 channel mixer with four mono mic/line and three stereo line input channels, supporting a wide range of inputsYamahas high quality SPX reverb, providing optimum processing for instruments or vocalsFeedback Suppressor, which automatically cuts and prevents undesirable feedback noiseIndependent three band equalizer on each channel for tonal adjustment and sound controlTechnical SpecificationsInputs:
TOTAL 10ch : Mono (MIC/LINE):4, Stereo(LINE):3
Phantom power:
CH1, 2 : +30 V
Outputs:
SPEAKERS [L, R], MONITOR OUT [L,R], SUBWOOFER OUT
Control and others:
FOOT SW : Effect Mute on/off
Bus:
Stereo: 1, Effect: 1
Input Channel Function
PAD:
26 dB (CH1-4)
Hi-Z:
Supported (CH4)
EQ HIGH:
8kHz +15dB/-15dB
EQ MID:
2.5kHz +15dB/-15dB
EQ LOW:
100Hz +15dB/-15dB
On-board processors
DSP:
SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor
On-board amplifiers
Maximum output power @4ohms:
1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W
Maximum output power @8ohms:
1kHz THD+N less than 10% (CEA2006): 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W
Level Meter:
6points (-20, -6, 0 , +3, +6, LIMITER)
Frequency response:
Input to SPEAKERS: +1 dB/-4 dB (40Hz to 20kHz), Input to MONITOR OUT : +0.5 dB/-1.5 dB (20Hz to 20kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion:
Input to SPEAKERS : 0.2 % @ 13.8 W (40Hz to 20kHz), 0.4 % @ 23.2W (1kHz), Input to MONITOR OUT : 0.05 % @ +10 dBu (20Hz to 20kHz) 0.009 % @ +20 dBu (1kHz), (THD+N, Measured with 22 kHz LPF)
Hum & noise level
Equivalent input noise:
-115 dBu
Residual output noise:
Input to SPEAKERS: -68 dBu (40Hz to 20kHz, MASTER: min), Input to MONITOR OUT : -99 dBu (20Hz to 20kHz, MONITOR: min)
Crosstalk:
-80 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit
Load protection:
DC-fault
Amplifier protection:
Over heat protection, Over current protection
Power requirements:
AC 100-240V, 50Hz/60Hz
Power consumption:
35W (Idle) / 90W (1/8 Power)
Dimensions W x H x D:
375 mm (14.8") x 147 mm (5.8") x 220 mm (8.7")
Net weight:
4.2 kg (9.3 lbs.)
==================================================================================================================Yamaha EMX 5 12-Channel Dual 630W Power Amplified Mixer - USA Authorized Dealer!The Yamaha EMX 5 is a 12-input powered mixer with an integrated 1260W amplifier, eight mic/line inputs, four stereo line inputs, and two Aux sends. The mixer features a Hi-Z guitar input on channel four and each channel offers a 3-band EQ for custom tailoring your sound. Channels 1-4 offer XLR-1/4" combo jacks. Channels 5 through 12 provide mono XLR inputs, with channels 5-8 offering 1/4" inputs and 9-12 offering an additional set of stereo RCA inputs. Channels 11/12 also include an 1/8" stereo mini-jack for connecting portable music players.The EMX 5 includes a single knob compressor on channels 1-4, an integrated feedback suppressor, and a built-in multi-effects processor with SPX series algorithms. Additionally, the mixer offers a Master EQ, which provides a single knob to control the level of low end. At the far left, the speech setting cuts low frequencies, while the middle position is neutral for music playback. The far right setting provides a Bass Boost to enhance music playback. Optional accessories available include a foot switch for effects bypass and a rack-mount kit. The EMX 5 ships with a standard IEC power cord.Key Features2x 630W [4ohm], 2x 460W [8ohm] (1kHz THD+N less than 10% CEA2006)2x 500W [4ohm], 2x 370W [8ohm] (1kHz THD+N less than 1% CEA2006)Powerful & High Efficiency Class-D Amplifier12 Line Inputs (8 mono + 4 stereo)High-Z input (channel 4) to connect guitars or basses directly1-Knob Master EQOnboard Feedback SuppressorComprehensive, professional 24 different effectsMetal chassis for extended operation and robustnessLarge handles for extreme portability and protectionUniversal power supply eliminates concern on power fluctuationsOptional rack-mount kit availableTechnical SpecificationsInputs:
TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Phantom power:
+48 V
Outputs:
SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Control and others:
FOOT SWITCH : Effect Mute on/off
Bus:
Stereo: 1, AUX: 2 (Including FX)
Input Channel Function
PAD:
30 dB (CH1-4)
Hi-Z:
Supported (CH4)
HPF:
80 Hz, -12 dB/oct. (CH13)
COMP:
1-knob COMP (CH14)
EQ HIGH:
10 kHz +15 dB / -15 dB (Shelving)
EQ MID:
2.5 kHz +15 dB / -15 dB (Peaking)
EQ LOW:
100 Hz +15 dB / -15 dB (Shelving)
On-board processors
DSP:
SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ
On-board amplifiers
Maximum output power @4ohms:
1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
Maximum output power @8ohms:
1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
Level Meter:
2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
Frequency response:
Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion:
Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
Hum & noise level
Equivalent input noise:
-117 dBu (Noise is measured with A-weighting filter)
Residual output noise:
Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Crosstalk:
-85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit
Load protection:
DC-fault
Amplifier protection:
Over heat protection, Over current protection, Integral power protection
Power supply protection:
Over heat protection, Over current protection
Power requirements:
AC 100-240V, 50Hz/60Hz
Power consumption:
42 W (Idle) / 210 W (1/8 Power)
Dimensions W x H x D:
465 mm (18 5/16") x 308 mm (12 1/8") x 325 mm (12 13/16")
Net weight:
9.5 kg (20.9 lbs)
Description
| Condition: | New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Brand: | Yamaha |
| Package Included 2: | AC Power Cord | MPN: | EMX2 / EMX5 |
| Package Included 3: | Manufacturer 1-Year Warranty | Package Included 1: | Yamaha EMX2 or EMX5 Powered Mixer |
Yamaha EMX 2 10-Channel 500W Powered Amplified Mixer - USA Authorized Dealer!Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.Despite being a mixer and an amplifier in a single unit, the EMX2's dimensions (37.5cm x 22cm x 15cm / 14.8" x 5.8" x 8.7") are surprisingly modest, making it easy to fit along with speakers even in the trunk of a small car. The lightweight body also features handles for a superior level of portability that will benefit anyone setting up a PA for applications where time is a consideration.Key Features500 watt power amplifier for versatility in a wide variety of performance applications10 channel mixer with four mono mic/line and three stereo line input channels, supporting a wide range of inputsYamahas high quality SPX reverb, providing optimum processing for instruments or vocalsFeedback Suppressor, which automatically cuts and prevents undesirable feedback noiseIndependent three band equalizer on each channel for tonal adjustment and sound controlTechnical SpecificationsInputs:
TOTAL 10ch : Mono (MIC/LINE):4, Stereo(LINE):3
Phantom power:
CH1, 2 : +30 V
Outputs:
SPEAKERS [L, R], MONITOR OUT [L,R], SUBWOOFER OUT
Control and others:
FOOT SW : Effect Mute on/off
Bus:
Stereo: 1, Effect: 1
Input Channel Function
PAD:
26 dB (CH1-4)
Hi-Z:
Supported (CH4)
EQ HIGH:
8kHz +15dB/-15dB
EQ MID:
2.5kHz +15dB/-15dB
EQ LOW:
100Hz +15dB/-15dB
On-board processors
DSP:
SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor
On-board amplifiers
Maximum output power @4ohms:
1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W
Maximum output power @8ohms:
1kHz THD+N less than 10% (CEA2006): 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W
Level Meter:
6points (-20, -6, 0 , +3, +6, LIMITER)
Frequency response:
Input to SPEAKERS: +1 dB/-4 dB (40Hz to 20kHz), Input to MONITOR OUT : +0.5 dB/-1.5 dB (20Hz to 20kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion:
Input to SPEAKERS : 0.2 % @ 13.8 W (40Hz to 20kHz), 0.4 % @ 23.2W (1kHz), Input to MONITOR OUT : 0.05 % @ +10 dBu (20Hz to 20kHz) 0.009 % @ +20 dBu (1kHz), (THD+N, Measured with 22 kHz LPF)
Hum & noise level
Equivalent input noise:
-115 dBu
Residual output noise:
Input to SPEAKERS: -68 dBu (40Hz to 20kHz, MASTER: min), Input to MONITOR OUT : -99 dBu (20Hz to 20kHz, MONITOR: min)
Crosstalk:
-80 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit
Load protection:
DC-fault
Amplifier protection:
Over heat protection, Over current protection
Power requirements:
AC 100-240V, 50Hz/60Hz
Power consumption:
35W (Idle) / 90W (1/8 Power)
Dimensions W x H x D:
375 mm (14.8") x 147 mm (5.8") x 220 mm (8.7")
Net weight:
4.2 kg (9.3 lbs.)
==================================================================================================================Yamaha EMX 5 12-Channel Dual 630W Power Amplified Mixer - USA Authorized Dealer!
TOTAL 10ch : Mono (MIC/LINE):4, Stereo(LINE):3
Phantom power:
CH1, 2 : +30 V
Outputs:
SPEAKERS [L, R], MONITOR OUT [L,R], SUBWOOFER OUT
Control and others:
FOOT SW : Effect Mute on/off
Bus:
Stereo: 1, Effect: 1
Input Channel Function
PAD:
26 dB (CH1-4)
Hi-Z:
Supported (CH4)
EQ HIGH:
8kHz +15dB/-15dB
EQ MID:
2.5kHz +15dB/-15dB
EQ LOW:
100Hz +15dB/-15dB
On-board processors
DSP:
SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor
On-board amplifiers
Maximum output power @4ohms:
1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W
Maximum output power @8ohms:
1kHz THD+N less than 10% (CEA2006): 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W
Level Meter:
6points (-20, -6, 0 , +3, +6, LIMITER)
Frequency response:
Input to SPEAKERS: +1 dB/-4 dB (40Hz to 20kHz), Input to MONITOR OUT : +0.5 dB/-1.5 dB (20Hz to 20kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion:
Input to SPEAKERS : 0.2 % @ 13.8 W (40Hz to 20kHz), 0.4 % @ 23.2W (1kHz), Input to MONITOR OUT : 0.05 % @ +10 dBu (20Hz to 20kHz) 0.009 % @ +20 dBu (1kHz), (THD+N, Measured with 22 kHz LPF)
Hum & noise level
Equivalent input noise:
-115 dBu
Residual output noise:
Input to SPEAKERS: -68 dBu (40Hz to 20kHz, MASTER: min), Input to MONITOR OUT : -99 dBu (20Hz to 20kHz, MONITOR: min)
Crosstalk:
-80 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit
Load protection:
DC-fault
Amplifier protection:
Over heat protection, Over current protection
Power requirements:
AC 100-240V, 50Hz/60Hz
Power consumption:
35W (Idle) / 90W (1/8 Power)
Dimensions W x H x D:
375 mm (14.8") x 147 mm (5.8") x 220 mm (8.7")
Net weight:
4.2 kg (9.3 lbs.)
==================================================================================================================Yamaha EMX 5 12-Channel Dual 630W Power Amplified Mixer - USA Authorized Dealer!
The Yamaha EMX 5 is a 12-input powered mixer with an integrated 1260W amplifier, eight mic/line inputs, four stereo line inputs, and two Aux sends. The mixer features a Hi-Z guitar input on channel four and each channel offers a 3-band EQ for custom tailoring your sound. Channels 1-4 offer XLR-1/4" combo jacks. Channels 5 through 12 provide mono XLR inputs, with channels 5-8 offering 1/4" inputs and 9-12 offering an additional set of stereo RCA inputs. Channels 11/12 also include an 1/8" stereo mini-jack for connecting portable music players.The EMX 5 includes a single knob compressor on channels 1-4, an integrated feedback suppressor, and a built-in multi-effects processor with SPX series algorithms. Additionally, the mixer offers a Master EQ, which provides a single knob to control the level of low end. At the far left, the speech setting cuts low frequencies, while the middle position is neutral for music playback. The far right setting provides a Bass Boost to enhance music playback. Optional accessories available include a foot switch for effects bypass and a rack-mount kit. The EMX 5 ships with a standard IEC power cord.Key Features2x 630W [4ohm], 2x 460W [8ohm] (1kHz THD+N less than 10% CEA2006)2x 500W [4ohm], 2x 370W [8ohm] (1kHz THD+N less than 1% CEA2006)Powerful & High Efficiency Class-D Amplifier12 Line Inputs (8 mono + 4 stereo)High-Z input (channel 4) to connect guitars or basses directly1-Knob Master EQOnboard Feedback SuppressorComprehensive, professional 24 different effectsMetal chassis for extended operation and robustnessLarge handles for extreme portability and protectionUniversal power supply eliminates concern on power fluctuationsOptional rack-mount kit availableTechnical SpecificationsInputs:
TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Phantom power:
+48 V
Outputs:
SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Control and others:
FOOT SWITCH : Effect Mute on/off
Bus:
Stereo: 1, AUX: 2 (Including FX)
Input Channel Function
PAD:
30 dB (CH1-4)
Hi-Z:
Supported (CH4)
HPF:
80 Hz, -12 dB/oct. (CH13)
COMP:
1-knob COMP (CH14)
EQ HIGH:
10 kHz +15 dB / -15 dB (Shelving)
EQ MID:
2.5 kHz +15 dB / -15 dB (Peaking)
EQ LOW:
100 Hz +15 dB / -15 dB (Shelving)
On-board processors
DSP:
SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ
On-board amplifiers
Maximum output power @4ohms:
1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
Maximum output power @8ohms:
1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
Level Meter:
2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
Frequency response:
Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion:
Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
Hum & noise level
Equivalent input noise:
-117 dBu (Noise is measured with A-weighting filter)
Residual output noise:
Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Crosstalk:
-85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit
Load protection:
DC-fault
Amplifier protection:
Over heat protection, Over current protection, Integral power protection
Power supply protection:
Over heat protection, Over current protection
Power requirements:
AC 100-240V, 50Hz/60Hz
Power consumption:
42 W (Idle) / 210 W (1/8 Power)
Dimensions W x H x D:
465 mm (18 5/16") x 308 mm (12 1/8") x 325 mm (12 13/16")
Net weight:
9.5 kg (20.9 lbs)
TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Phantom power:
+48 V
Outputs:
SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Control and others:
FOOT SWITCH : Effect Mute on/off
Bus:
Stereo: 1, AUX: 2 (Including FX)
Input Channel Function
PAD:
30 dB (CH1-4)
Hi-Z:
Supported (CH4)
HPF:
80 Hz, -12 dB/oct. (CH13)
COMP:
1-knob COMP (CH14)
EQ HIGH:
10 kHz +15 dB / -15 dB (Shelving)
EQ MID:
2.5 kHz +15 dB / -15 dB (Peaking)
EQ LOW:
100 Hz +15 dB / -15 dB (Shelving)
On-board processors
DSP:
SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ
On-board amplifiers
Maximum output power @4ohms:
1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
Maximum output power @8ohms:
1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
Level Meter:
2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
Frequency response:
Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion:
Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
Hum & noise level
Equivalent input noise:
-117 dBu (Noise is measured with A-weighting filter)
Residual output noise:
Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Crosstalk:
-85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit
Load protection:
DC-fault
Amplifier protection:
Over heat protection, Over current protection, Integral power protection
Power supply protection:
Over heat protection, Over current protection
Power requirements:
AC 100-240V, 50Hz/60Hz
Power consumption:
42 W (Idle) / 210 W (1/8 Power)
Dimensions W x H x D:
465 mm (18 5/16") x 308 mm (12 1/8") x 325 mm (12 13/16")
Net weight:
9.5 kg (20.9 lbs)