Brand new this package would still run you about $1700 + this is a really great deal ! I am upgrading a different part of the studio and this is basically an extra unit I won't need. It has been used for less than 20 hours in the studio and it's in pristine working condition, as well as the remote. I don't have pics of the remote just yet but can provide those as well. See below for details specs and a link to the same gear online... RME Fireface UFX Edition with Remote Control  If it's I/O flexibility you're seeking, then look no further than the Fireface UFX! You don't just get 12 channels of premium analog I/O; you also get AES/EBU, ADAT, S/PDIF, and MIDI I/O. You also get a rock-solid onboard word clock. RME did an outstanding job of making the Fireface UFX the ideal centerpiece for your studio setup. This incredible single-rackspace interface even includes built-in monitoring control. When you couple that functionality with the TotalMix FX DSP mixer/router, you have a total studio solution. RME Fireface UFX 30 x 30 USB/FireWire Interface Features: 24-bit/192kHz 30 Input / 30 Output channels 12 x Analog I/O 4 x Mic/Instrument Preamp, digitally controlled 1 x AES/EBU I/O 2 x ADAT I/O (or 1 x ADAT I/O plus 1 x SPDIF I/O optical) 1 x Word Clock I/O 2 x MIDI I/O 1 x FireWire 400 1 x USB 2.0 TotalMix FX DSP mixer/ signal router AD, Line-in 1-8, rear Signal to Noise ratio (SNR): 110dB RMS unweighted, 113dBA Frequency response @ 44.1kHz, -0.1dB: 5Hz - 21.5kHz Frequency response @ 96kHz, -0.5dB: 5Hz - 45.5kHz Frequency response @ 192kHz, -1dB: 5Hz - 66.5kHz THD: < -110dB, < 0.00032% THD+N: < -104dB, < 0.00063% Channel separation: > 110dB Input: 1/4" TRS jack, electronically balanced Input sensitivity switchable to Lo Gain, +4dBu, -10dBV Input level for 0 dBFS @ Lo Gain: +19dBu Input level for 0 dBFS @ +4 dBu: +13dBu Input level for 0 dBFS @ -10 dBV: +2dBV Microphone In 9-12, front Input: XLR, electronically balanced Signal to Noise ratio (SNR): 112dB RMS unweighted, 115dBA Gain range: 65dB Maximum input level, Gain 0dB: +12dBu Instrument In 9-12, front Input: 1/4" TS jack, unbalanced Signal to Noise ratio (SNR): 112dB RMS unweighted, 115dBA Gain range: 55dB DA, Line Out 3-8, rear Dynamic range (DR): 115dB RMS unweighted, 118dBA Frequency response @ 44.1kHz, -0.5dB: 5Hz - 22kHz Frequency response @ 96kHz, -0.5dB: 5Hz - 34kHz Frequency response @ 192kHz, -1dB: 5Hz - 50kHz THD: -104dB, < 0.00063% THD+N: -100dB, < 0.00% Channel separation: > 110dB Output: 1/4" TRS jack, servo-balanced Output impedance: 75 ohm Output level switchable Hi Gain, +4 dBu, -10dBV Output level at 0dBFS @ Hi Gain: +19dBuB Output level at 0dBFS @ +4dBu: +13dBu Output level at 0dBFS @ -10dBV: +2dBV DA - Stereo Monitor Output XLR (1-2) Output: XLR, balanced Output level switchable 24dBu, Hi Gain, +4dBu, -10dBV Output level at 0dBFS @ 24dBu: +24dBu DA - Stereo Monitor Output Phones (9-12) Output: 1/4" TRS stereo jack, unbalanced Maximum output level at 0dBFS, High: +13dBu Maximum output level at 0dBFS, Low: +2dBV Output impedance: 30 ohm AES/EBU XLR, transformer-balanced, galvanically isolated, according to AES3-1992 ADAT Optical 4 x TOSlink, format according to Alesis specification Standard: 2 x 8 channels 24-bit, up to 48kHz Double Speed (S/MUX): 2 x 4 channels 24 bit 96kHz Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192kHz Word Clock BNC, switch for internal termination 75 ohm