Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR MANUFACTURER

Package Includes: (1) Audio Technica AT4050 1B Multi-Pattern Condenser Microphone (1) Audio Technica AT2020 Studio Recording Microphone-Cardioid Condenser

---

  Authorized Audio-Technica Dealer! Description of AT4050:  Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more. Features: Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use Three switchable polar patterns: omni, cardioid, figure-of-eight Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Switchable 80 Hz hi-pass filter and 10 dB pad Custom shock mount provides superior isolation Details: ELEMENT: Externally polarized (DC Bias) condenser POLAR PATTERN: Cardioid, Omnidirectional, Figure-of-eight FREQUENCY RESPONSE: 20-18,000 Hz OPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.; // 159 dB SPL, with 10 dB pad (nominal) DYNAMIC RANGE (typical): 132 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 77 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical SWITCHES:   Polar selection; Flat, roll-off; 10 dB pad (nominal) WEIGHT:  18.0 oz (510 g) DIMENSIONS:  7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case AUDIO-TECHNICA CASE STYLE: R1

---

Description of AT2020:  Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers Features: The price/performance standard in side-address studio condenser microphone technology Ideal for project/home-studio applications High SPL handling and wide dynamic range provide unmatched versatility Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone  

ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	20-20,000 Hz
OPEN CIRCUIT SENSITIVITY	–37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE	100 ohms
MAXIMUM INPUT SOUND LEVEL	144 dB SPL, 1 kHz at 1% T.H.D.
NOISE	20 dB SPL
DYNAMIC RANGE (typical)	124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	48V DC, 2 mA typical
WEIGHT	12.1 oz (345 g)
DIMENSIONS	6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
OUTPUT CONNECTOR	Integral 3-pin XLRM-type
ACCESSORIES FURNISHED	Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLE	R7

---

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy. Prior to returning merchandise, contact us and we will give you a return authorization #. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us. Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options: You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit. You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us. Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.