Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR MANUFACTURER

Package Includes: (1) Audio Technica AT4050 1B Multi-Pattern Condenser Microphone+Shockmount+Case Mic
(1) Audio Technica ATH-M50X Over Ear Pro Studio Monitor Headphones W/ Case (1) Presonus HP4 4 Channel Headphone Amplifier Monitoring System

---

Authorized Audio-Technica Dealer! Description of AT4050:
Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more. Features: Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use Three switchable polar patterns: omni, cardioid, figure-of-eight Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Switchable 80 Hz hi-pass filter and 10 dB pad Custom shock mount provides superior isolation Details: ELEMENT: Externally polarized (DC Bias) condenser POLAR PATTERN: Cardioid, Omnidirectional, Figure-of-eight FREQUENCY RESPONSE: 20-18,000 Hz OPEN CIRCUIT SENSITIVITY: -36 dB (15.8 mV), re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.; // 159 dB SPL, with 10 dB pad (nominal) DYNAMIC RANGE (typical): 132 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 77 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 4.2 mA typical SWITCHES:   Polar selection; Flat, roll-off; 10 dB pad (nominal) WEIGHT:  18.0 oz (510 g) DIMENSIONS:  7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case AUDIO-TECHNICA CASE STYLE: R1

---

Description of ATH-M50X:
As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

More About the M-Series Headphones 
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Features: Audio Technica ATH-M50X Over Ear Professional Studio Monitor Collapsible Headphones Advanced build quality and engineering Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
Circumaural design contours around the ears for excellent sound isolation in loud environments
90° swiveling earcups for easy, one-ear monitoring
Professional-grade earpad and headband material delivers more durability and comfort
Collapsible for space-saving portability
Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)
Top choice for studio tracking and mixing, as well as DJ monitoring and personal listening
Type: Closed-back dynamic
Driver Diameter: 45 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 28,000 Hz
Maximum Input Power: 1,600 mW at 1 kHz
Sensitivity: 99 dB
Impedance: 38 ohms
Weight: 285 g (7.8 oz), without cable and connector
Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
Accessories Included: Protective carrying pouch, 6.3 mm (1/4“) screw-on adapter

---

Features Summary of HP4: Four High Power Headphone Outputs Ultra loud (150mW per channel) Ultra quiet operation Musical Wide Dynamic Range Control Room Monitor Outputs with Level Control Mono or Stereo Operation Monitor Mute Switch Daisy Chain an Infinite Number of Units Compact package

---

Description: "To my amazement, your HP4 sounded as good as both of my hi-fi stereo heaphone amps. Very very clean and loud. I can't believe you put 150 mw per channel, @52 ohms, to four headphone outputs and offer such a quality unit for very little over $100."
- M. Burke, via email The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price.

---

Important Documents:
(All links will open in a new pop-up window)

---

Technical Specifications:

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy. Prior to returning merchandise, contact us and we will give you a return authorization #. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us. Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options: You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit. You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us. Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.